• YAKHAK HOEJI
• /
• v.39 no.5
• /
• pp.495-505
• /
• 1995

The O/W microemulsion systems were made from 2 or 4% (w/w) oil (soybean oil, olive oil or isopropyl myristate) and 10, 15 or 20% (w/w) Brij 96. They were compared with micellar solution of equivalent surfactant concentration m therms of physicochemical properties, and the solubilization of sudan IV. They were characterized by dynamic light scattering, stability, surface tension, viscosity and rheogram. The mean diameters of O/W microemulsion systems were 10-15nm, and those of Brij 96 micellar solutions were 18-19 nm. Both of them were monodisperse systems. The O/W microemulsion systems showed Newtonian flow and their apparent viscosities were lower than those of micellar solutions. The surface tensions of O/W microemulsion systems were increased or decreased depending on the types of oil used, when compared with those of micellar solutions. The O/W microemulsion systems were very stable, and did not show any flocculation or aggregation. Their mean diameters were not changed after three months. But oxidation was observed in microemulsions without nitrogen gas at high temperature. There was a significant improvement in the sudan IV solubffimtion in micromulsion compared with that m the micellar solution containing equivalent concentration of surfactant. The size distribution and mean diameters of O/W micromulsions were not changed when sudan IV was solubilized.

• Journal of Industrial Technology
• /
• v.43 no.1
• /
• pp.1-6
• /
• 2023

TiO₂ is a versatile metal oxide material that is frequently used as a photo-catalyst for organic pollutant oxidation and a functional material for ultraviolet-ray protection. To improve its chemical/physical properties and widen the range of industrial application, it is demanded to control the crystalline feature and morphology precisely by applying advanced nano-synthesis methods. In this study, we prepared TiO₂ nanoparticles using the water-in-oil (W/O) microemulsion method and compared them with the particles synthesized by the conventional precipitation method. Also, we tried to find the optimum conditions for obtaining nano-sized, anatase-rich TiO₂ particles by the W/O microemulsion method. We analyzed the crystalline feature and particle size of the prepared samples using X-ray diffraction (XRD) and Transmission electron microscopy (TEM). In summary, we found the W/O microemulsion is more effective than precipitation in obtaining nano-sized TiO₂. The best result was derived when the microemulsion was formed using AOT surfactant, hydrolysis was performed under basic condition and the sample was calcined at 200℃.

• Applied Chemistry for Engineering
• /
• v.16 no.5
• /
• pp.705-711
• /
• 2005

The reaction of lauric acid vinyl ester with n-butanol was established to give lauric acid butyl ester by subtilisin A-catalyzed transesterification in organic media containing nonionic surfactants. Pyridine has been used as an organic solvent since it provides higher yields than other organic solvents. However, because of stench of pyridine, compounds enzymatically synthesized in pyridine may be unsuitable as ingredients for foods and drugs. Hence, in order to select an organic solvent to replace pyridine, sugar esters were synthesized with the protease in various organic media. However, no solvent paralleled pyridine in yields. On the basis of this result, pyridine-based W/O microemulsions containing nonionic surfactants and water were used in enzymatic synthesis of the sugar ester, and when Tween 60, Brij 56, or 1-O-octyl-${\beta}$-D-glucopyranose was used for the W/O microemulsions, the yield was higher.

• Applied Chemistry for Engineering
• /
• v.26 no.3
• /
• pp.362-365
• /
• 2015

Silica encapsulated ZnSe quantum dots (QDs) were prepared by employing two microemulsion systems: AOT/water/cyclohexane microemulsions containing ZnSe quantum dots with NP5/water/cyclohexane microemulsions containing tetraethylorthosilicate (TEOS). Using this method, cubic zinc blende nanoparticles (3 nm in diameter) were synthesized and encapsulated by silica nanoparticles (20 nm in diameter). The temperature dependence of photoluminescence (PL) for silica-encapsulated ZnSe QDs was investigated to evaluate this material as a temperature sensor media. The fluorescence emission intensity of silica-encapsulated ZnSe nanoparticles (NPs) was decreased with an increase of ambient temperature over the range from $30^{\circ}C$ to $60^{\circ}C$ and a linear relationship between the temperature and the emission intensity was observed. In addition, the temperature dependence of PL intensity for silica-encapsulated ZnSe NPs showed a reversible pattern on ambient temperature. A reversible temperature dependence of the luminescence combined with its insensitivity toward quenching by oxygen due to silica coating established this material as an attractive media for temperature sensor applications.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.4
• /
• pp.233-241
• /
• 2005

Ursolic acid (UA), a bioactive triterpene acid, has been known to increase collagen content in human skin in addition to other actions such as anti-inflammatory, skin-tumor prevention and anti-invasion. However, it is poorly soluble in water. Therefore, we firstly prepared microemulsion system with benzyl alcohol, ethanol and Cremophor EL, RH 40 and Brij 35 as surfactant in order to increase solubility of UA and then prepared microemulsion was dispersed in o/w cream base for the topical delivery of UA in an effort to improve anti-wrinkle effect. The pseudo-ternary phase diagrams were developed and various microemulsion formulations were prepared using benzyl alcohol as an oil, Cremophor EL, RH 40 and Brij 35 as a surfactant. The droplet size of microemulsions was characterized by dynamic light scattering. The accumulation of VA in the skin from topical cream was evaluated in vitro using hairless mouse skins. The mean droplet size was $26.8{\pm}6.6$ nm for microemulsions II with Cremophor EL. All UA creams showed pseudoplastic flow and hysterisis loop in their rheogram, depending on the type of materials added in topical creams. The in vitro accumulation data demonstrated the UA topical cream prepared with the combination of Poloxamer 407 and Xanthan gum as a copolymer showed higher accumulation percentage than those prepared with either Poloxamer 407 or Xanthan gum. These results suggest that UA topical cream using microemulsion systems may be promising for the topical delivery of UA.

• Journal of Pharmaceutical Investigation
• /
• v.38 no.3
• /
• pp.171-176
• /
• 2008

Talniflumate is a nonsteroidal anti-inflammatory drug (NSAID), which has been used treat of rheumatoid diseases, is insoluble in water, therefore it has low bioavailability after oral administration. The purposes of this study were to prepare O/W or W/O microemulsions for solubilization of poorly water soluble drug, talniflumate and to formulate into other dosage form. For this purpose, we made O/W or W/O microemulsion with oil(soybean oil, IPM), surfactant (Cremophor $EL^{(R)}$, Tween 80) and water or propylene glycol and evaluated solubility of talniflumate. The microemulsion systems were very stable and showed transmittance above 95% without flocculation or aggregation. Especially, the solubility of talniflumate in the formulation B-1 containing 18% of isopropyl myristate and 71% of tween 80 was 10 times higher than that of other O/W microemulsions. The addition of propylene glycol and N-methylglutamine to the fomulation B-1 showed excellent capacity on the solubilization of talniflumate and the percentage was almost 2.0%. These results suggest that the microemulsion system may be promising for the solubility improvement of talniflumate.

• YAKHAK HOEJI
• /
• v.56 no.3
• /
• pp.152-157
• /
• 2012

Angelica gigas is one of the most widely used herbal medicines in Asia. Root extract of Angelica gigas is known to have anti-oxidant activity and skin whitening effect. The aim of this study was to prepare microemulsion system of root extracts of Angelica gigas for topical delivery. Microemulsion was successfully prepared by using MCT (medium chain triglyceride) as an oil phase, Labrasol as a surfactant, and the mixture of propyleneglycol and phosphatidylcholine (4 : 1) as a cosurfactant. In vitro and in vivo skin permeation and deposition of decursin, as a marker, was determined using hairless mouse. Microemulsion significantly increased the in vitro skin permeation of decursin for up to 12 hours and was significantly higher than the control (water). Moreover, microemulsion formulation showed significantly higher skin deposition of decursin compared to the control in both in vitro and in vivo studies. Thus, microemulsion could be a useful vehicle for topical application of root extracts of Angelica gigas.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.112-117
• /
• 1999

The pulsed field gradient NMR method has been used to determine self-diffusion coefficients in ternary N-alkyl-N, N-dimethylamine oxide/hydrocarbon/$D_2O$ system. For n = 12, 14, 16 and n' = 8, 10, 12, 14, 16, in the micellar phase, diffusion is chiefly governed by the hydrodynamic transport of micelles, supplemented by an exchange of solubilized hydrocarbon upon micellar collisions. This investgation is performed by variations in both the surfactant alkyl chain length and in the size of the hydrocarbon molecules. In cubic phases, the solvent still exhibits values of the diffusion coefficients which are typical for motion in a continuous water phase, with the microemulsion droplets acting as obstacle. Mobilities of the surfactant in the gel state were low and have been determined only for the surfactant($C_{12}DMAO$) with the shortest alkyl chain length. Exchange of hydrocarbon between micellar entities in the gel was found to be occured by a hopping process, the associated rate decreased with alkyl chain length of the surfactant.

• Korean Chemical Engineering Research
• /
• v.50 no.6
• /
• pp.969-979
• /
• 2012

In this study, the effects of cosurfactant on phase equilibrium and dynamic behavior were studied in systems containing nonylphenol ethoxylate (NP) surfactant solutions and nonpolar hydrocarbon oils. All the cosurfactants used during this study such as n-pentanol, n-octanol and n-decanol acted as a hydrophobic additive and the hydrophobic effect was found to increase with both increases in chain length and amount of addition of a cosurfactant. Dynamic behavior studies under hydrophilic conditions showed that the solubilization of hydrocarbon oil by NP micellar solution is controlled by an interface-controlled mechanism rather than a diffusion-controlled mechanism. Both spontaneous emulsification of water into oil phase and expansion of oil drop were observed under lipophilic conditions because of diffusion of surfactant and water into oil phase. Under conditions of a three phase region including a middle-phase microemulsion, both rapid solubilization and emulsification of oil into aqueous solutions were found mainly due to the existence of ultralow interfacial tension.

• Korean Chemical Engineering Research
• /
• v.47 no.1
• /
• pp.38-45
• /
• 2009

In this study, interfacial properties were measured for imidazoline type cationic surfactant system which has been widely used as a fabric softener, a dispersant, an anti-static agent, a bleach activator, and an emulsifier. The CMC of imidazoline surfactant was near $6{\times}10^{-5}mol/L$ and the surface tension at CMC was about 32 mN/m. It was found that surface tension was not affected by surfactant concentration but decreased with an increase in pH. The interfacial tension between 1 wt% aqueous solution and n-dodecane was shown to be about 0.01 mN/m and equilibration time was not affected by pH. Phase behavior experiment in a binary aqueous surfactant system showed that only micellar solution of $L_1$ phase was found under conditions of temperature and pH investigated during this study. Only a two-phase region consisting of lower-phase microemulsion in equilibrium with excess oil phase existed under the same conditions, when oil was added to the binary surfactant system. The foam stability measured with 1 wt% surfactant solution increased with pH, which is consistent with surface tension measurement result. QCM(quartz crystal microbalance) measurement showed that surfactant adsorption increased with surfactant concentration but decreased with pH. According to the friction measurement, best fabric softening effect by imidazoline surfactant system was found under alkali conditions.