• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1194-1196
• /
• 2001

본 논문은 스테핑 모터의 구동 중에서 2상 여자모드와 마이크로 스테핑의 주기성이 동일함에 기초하여 32 스텝의 정현파 마이크의 스테핑을 실현하고 그 특성을 연구한 내용이다. 마이크로 스테핑은 스테핑 모터의 스텝각을 크게 세분화하여 구동함으로써 진동과 소음이 적고 부드럽게 구동하고자 하는 방법인데, 본 논문의 정현파 마이크로 스테핑은 종래의 마이크로 스테핑에 비하여 더욱 우수한 저진동 저소음 특성을 나타낸다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.1
• /
• pp.88-95
• /
• 2004

Micro stepping method is adopted in order to eliminate effectively the resonant phenomena and to increase the positional resolution. Exist micro-step method by using Sinusoidal waveform, drive circuit is complex by using micro controller and ROM, it have fault on cost Increase. This paper proposed trapezoidal current wave form for simple control circuit and micro stepping method by using a low cost controller. This paper proposed method verify by using CPLD(EPM9320RC208-15) of low cost. This paper make experiment that comparison of exist method and proposed method. This paper obstruct a escape of motor by using high speed detect.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.11 no.5
• /
• pp.447-453
• /
• 2006

This paper proposes that 5 phase step motor drive system has high performance utilizing a micro step control with a current controller. Also this paper proposes an analog current controller to minimize size of the 5 phase step motor drive system. It has better advantages of cost and noise and heating than commercial products. As a result, Applying this system to position control robot the validity of suggested analog current controller and driver system is verified.

• Journal of the Korean Society for Precision Engineering
• /
• v.12 no.7
• /
• pp.26-31
• /
• 1995

A new actuating mechanism suitable for a micro positioning device is developed using piezo-electric elements. The actuator can make a step movement of 0.5 .mu. m up to 3.5 .mu. m. The step size can be adjusted on demand. By repeating this step action, long distance movement is achieved. Precise positioning can be obtained by combining the coarse motion with the maximum step size and fine motion. Two types of fine motion have been proposed for a driving method. Firstly, feedback control bases on PID is applied. The experimental results for the two method are presented.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.278-281
• /
• 2006

A Hybrid type LPM(Linear Pulse Motor) is designed as single side stator structure. Experimental results are shown that the static and dynamic characteristics. By the computer simulation, the permanent magnet design method is also clarified to desired thrust force. And microstep driver is adopted to the position controller to the designed LPM. The driver suppressed position errors within ${\pm}1501{\mu}m$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.05c
• /
• pp.53-56
• /
• 2004

This paper describes the method of position error reduction in Linear Pulse Motor (LPM). Though the micro step exiting method is applied, the vibration and position error caused by trust distortion from mechanism still remains. This paper presents the method for reduction of position error on moving the mover at whole cycle, by compensating a scale factor through real-time control of the PWM pulse width corresponding to exiting current command and absolute position error from linear encoder.

• Proceedings of the KIEE Conference
• /
• 2008.10c
• /
• pp.136-138
• /
• 2008

본 논문에서는 전기자전거에 응용할 수 있는 BLDC 전동기의 구동제어시스템을 설계하였으며, 시뮬링크를 이용한 시뮬레이션을 통해 BLDC 전동기와 그 구동제어시스템의 특성파악을 수행 하였다, 모터 컨트롤 전용 16비트 마이크로컨트롤러인 dsPIC30F3010을 탑제하여 시스템을 설계하였으며, 2상 여자 제어법을 적용하여 6-스텝 인버터를 구동하고, PID 연산을 수행, 속도제어 방법을 통하여 전기자전거에 사용할 수 있는 BLDC 전동기의 구동제어시스템을 구현 하였다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2147-2153
• /
• 2009

A Hybrid type Linear Pulse Motor(LPM) for low cost is designed as single side stator structure. The static and dynamic characteristics measurement systems are designed. Experimental measurement systems, which measure the static and dynamic characteristic of the LPM, are uggested for the prototype LPM. It becomes known the values of the thrust forces. Finally the microstep drive method is adopted to the drive of prototype LPM. The waveform difference is measured between the microstep method and rectangular wave. From the experimental results, it can be confirmed that the repetitive ripple of the thrust force of the prototype LPM are reduced by taking the microstep drive method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.2
• /
• pp.165-171
• /
• 2005

The ultrasonic piezo motor is a new type motor that has an excellent performance and many useful features that electromagnetic motors do not have. But, it suffers from severe system non-linearities and parameter variations especially during speed control. Therefore, it is difficult to accomplish satisfactory control performance by using the conventional PID controller. In this paper, to achieve the precise control for linear type ultrasonic motor was analyzed as a function of response time and change with a driving time. Also, we propose controller that combines STEP controller and PD controller that have error of ${\mu}m$ about liner type ultrasonic motor.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.135-138
• /
• 2001

This paper presents micro step driving method using VHDL(Very high speed integrated circuit Hardware Description Language) which can configure CPLD(Complex Programmable Logic Device). Using VHDL which can do abstractive programming is similar to high level language. The whole block divided into five parts with freq. divide part, saw-tooth wave generation part, sine-cosine wave generation part, comparative part, out part. In the result of this study, peripheral circuits are to be simple and using LPM(Library of Parameterized Modules) is more easily to configure circuit. It is easy to verify and implement by using VHDL. To subdivide one natural step, we confirm that using micro step driver is expected that the rotor motion is stepless very smooth.