• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2012년도 전력전자학술대회 논문집
• /
• pp.19-20
• /
• 2012

본 논문은 마이크로그리드에서 에너지 저장 시스템으로 이용되는 슈퍼커패시터 충방전용 양방향 DC-DC 컨버터의 효율을 고려한 변압기 권선비 설계에 관한 것이다. 본 논문에서 다루고자 하는 시스템은 Dual Full-Bridge 방식의 양방향 DC-DC 컨버터이다. 슈퍼커패시터측의 방전 동작시 컨버터는 부스트 컨버터로 등가화 할 수 있다. 따라서 등가화한 부스트 컨버터에 대해 권선비를 달리하면서 동일한 출력 조건에서 스위치 손실을 계산하였으며, 이를 통하여 최소의 손실을 가지는 출력전압 즉, 권선비를 찾는 방법을 제안한다.

• 전기학회논문지
• /
• 제61권7호
• /
• pp.966-973
• /
• 2012

In microgrid demonstration site, distributed generations can make bidirectional power flows on the system. If an accident occurs, the fault current from the inverter based distributed generation is small. However, the conventional protection scheme in distribution network is designed to operate at high fault current. This means that the traditional protection of distribution network is no longer applicable and new protection methods must be developed. In this paper, for two cases, algorithms for protection coordination of demonstration site is proposed and verified through PSCAD/EMTDC simulation. In first case, protection devices are assumed to have the abilities of directional relaying and communication. In second case, protection devices do not have those abilities. Proposed protection coordination algorithms detect the fault locations and protect the microgrid fairly well.

• 전기학회논문지
• /
• 제61권7호
• /
• pp.928-936
• /
• 2012

The microgrid concept assumes a cluster of loads and microsources operating as a single controllable system that provides a new paradigm for defining the operation of distributed generation. This system can be operated as both grid-connected mode and islanded mode. In other words, the microgrid can be operated to meet their special need; such as economics in steady state and local reliability in islanded mode due to the grid fault. This paper presents the AGC (Automatic Generation Control) method for microgrid with EMS (Energy Management System).

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2142-2148
• /
• 2009

A microgrid is defined as two or more distributed generation or storage assets configured in a networks and capable of operation in parallel or independently form a larger electric gird, while providing continuous power to one or more end users. And when microgrid are separated from grid oprating protection devices by faults of the grid side, microsources should charge electrical power needs of loads in microgrid and operate maintaining power quality. The magnitude of the switching transients will vary based on voltage phase difference between microgrid and grid, when the microgrid is resynchronized to grid. In this paper, when microgrid is resynchronized to grid, we analyzed the existing problems for reducing switching transients of SS(Static Switch).

• 전기학회논문지
• /
• 제57권4호
• /
• pp.582-588
• /
• 2008

Microgrids are new distribution level power networks that consist of various electronically-interlaced generators and sensitive loads. The important control object of Microgrids is to supply reliable and high-quality power even during the faults or loss of mains(islanding) cases. This paper presents power control methods to coordinate multiple distributed generators(DGs) against abnormal cases such as islanding and load power variations. Using speed-droop and voltage-droop characteristics, multiple distributed generators can share the load power based on locally measured signals without any communications between them. This paper adopts the droop controllers for multiple DG control and improved them by considering the generation speed of distribution level generators. Dynamic response of the proposed control scheme has been investigated under severe operation cases such as islanding and abrupt load changes through PSCAD/EMTDC simulations.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2016년도 추계학술대회 논문집
• /
• pp.169-170
• /
• 2016

여러 분산 발전 시스템으로 구성된 마이크로그리드는 계통 연계 모드에서 부하의 수요에 담당하게 되고, 계통 사고가 발생할 시 독립 운전 모드로 동작을 해야 한다. 본 논문에서는 독립운전 모드 동작 시 제어 방식 중에서 유, 무효 전력제어를 통한 적절한 전력 분담을 실현하기 위한 드룹제어 방식을 다룬다. 이 방식은 선로 임피던스가 복합 성분으로 구성되어 있거나 불 평형 일 경우 여러 문제로 유,무효 전력 분담의 오차를 발생 시킨다. 이에 대하여 가상임피던스를 추가함으로써, 복합적 불 평형 임피던스에 기인한 유,무효 전력 분담의 오차를 해결 하여, 시스템의 유,무효 전력 분담을 개선 하고자 하였다. 또한, 비선형 부하 시 고조파의 문제를 비례-공진 제어기를 이용하여 고조파를 저감 할 수 있도록 하였다. 이에 PSIM 시뮬레이션과 실험을 통하여 검증하였다.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2010년도 추계학술대회
• /
• pp.66-67
• /
• 2010

마이크로그리드 또는 발전용 연료전지 시스템과 같이 계통 이상 시 독립운전으로의 모드전환이 필요한 응용에서 과도현상을 최소화하는 Seamless Transfer 기술이 필수적이다. 모드전환 시 전압제어를 유지함으로서 이러한 과도상태를 최소화할 수 있는 간접전류제어 알고리즘이 제안된 바 있다. 그러나 제어기 모델에 의한 해석이 불가능하므로 제어 파라미터 설정이 어려운 단점이 있었다. 본 논문에서는 인버터의 모델을 고려하여 제어기를 해석함으로서 원하는 제어대역폭과 위상마진을 갖는 제어기의 게인 설정을 가능하게 하였다.

• 전기학회논문지P
• /
• 제67권4호
• /
• pp.175-182
• /
• 2018

In recent years, micro-grid has been widely focused on the fields of renewal energy systems. This paper proposes a novel robust power converter control against arbitrary electric load changes for islanded micro-grid topology. First, we provide a state-space representation of our micro-grid model including power converter and electric load circuit. And then a state feedback control method is applied to construct a nominal control framework. Next, we propose a robust adaptive control law to enhance a control performance against unexpected load perturbation. In addition, we analytically investigate a passivity property for the micro-grid model and carry out computer simulation to demonstrate superiority and reliability of the proposed control methodology.

• 전력전자학회논문지
• /
• 제24권5호
• /
• pp.349-355
• /
• 2019

A grid-connected inverter with critical loads should be able to supply a stable voltage to critical loads at mode change and during clearing time while detecting unintentional islanding. This study proposes a mode transfer method for a grid-connected inverter with critical loads. The proposed method, which integrates the grid-connected and islanded mode control loops into one control block, provides an autonomous and seamless mode transfer from the current control to the voltage control. Therefore, the proposed scheme can supply a stable voltage to critical loads at mode change and during clearing time. Experimental results are provided to validate the proposed method.

• 전력전자학회논문지
• /
• 제24권3호
• /
• pp.191-200
• /
• 2019

This study proposes a hardware-in-the-loop simulation (HILS) system based on National Instruments' PXI platform to test power management and operation strategies for DC microgrids (MGs). The HILS system is developed based on the controller HIL prototype, which involves testing the controller board in hardware with a real-time simulation model of the plant in a real-time digital simulator. The system provides an economical and effective testing function for research on MG systems. The decentralized power management strategy based on the DC bus signaling method for DC MGs has been developed and implemented on the HILS platform. HILS results are determined to be similar to those of the off-line simulation in PSIM software.