• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.295-295
• /
• 2005

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 2005년도 춘계학술발표대회 및 제8회 신소재 심포지엄 논문개요집
• /
• pp.294-294
• /
• 2005

• 공업화학전망
• /
• 제23권3호
• /
• pp.32-41
• /
• 2020

사람들은 대부분의 시간을 실내에서 보내고 있으며, 실내에 존재하는 유해가스는 미량의 농도에도 불구하고 심각한 질환을 일으킬 수 있다. 금속산화물 반도체 가스센서는 감도가 우수하고, 구조가 간단하며, 초소형화가 가능한 장점이 있어 고가의 대형 장비를 사용하지 않고 실내 유해가스를 측정하는 데 효과적으로 이용될 수 있다. 본 기고문에서는 금속산화물 반도체를 이용한 가스 센서의 검지 원리를 고찰하고, 나노 구조 조절, 마이크로 리액터 및 이중층 구조를 이용한 가스 개질 등 실내 유해가스 측정을 위한 다양한 센서 설계방법을 소개하고자 한다.

• 대한기계학회논문집B
• /
• 제35권8호
• /
• pp.789-798
• /
• 2011

본 연구에서는 디젤엔진에서 배출되는 질소산화물의 저감을 위한 후처리장치인 LNT(Lean NOx Trap, 흡장형 De-NOx 촉매)의 특성을 파악하였다. 먼저 희박한 배출가스 상태에서의 질소산화물 중 산화질소에 대한 촉매의 기본적인 흡장성능을 알아본 후, 다양한 환원제를 분사하여 인위적으로 배출가스를 농후한 상태를 만들었다. 농후한 상태에서는 희박한 상태에서 촉매 내에 흡장되어 있던 산화질소가 촉매의 환원반응에 의해서 질소로 전환된 후 촉매후단부에서 산화질소 배출농도를 측정하였다. 본 연구에서 사용된 LNT(Lean NOx Trap)시편은 실제 디젤 차량에서 사용되는 LNT 촉매로부터 Reactor에 장착될 수 있도록 작은 사이즈로 절단 및 가공된 후, SUS304의 stainless 재질로 재가공 처리한 후에 Micro bench-flow reactor에 장착하였다. 분사된 피드가스성분들은 실제 배출가스의 분위기를 만들기 위해서 각각 3가지의 가열성분, 비가열 성분으로 나누어 분사된다. 이러한 조건들에서 다양한 반응온도와 공간속도를 반응변수로 하여 LNT(Lean NOx Trap)의 흡장성능과 환원제종류에 따른 산화질소의 배출특성을 파악하였다.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2008년도 춘계학술대회논문집
• /
• pp.666-669
• /
• 2008

Droplet in miniaturized microfluidic systems have received much focused attention recently. In this work, electrical charging phenomenon of a conducting water droplet on the electrode under the dc electric field is studied and using this phenomenon droplet actuation method for microreactor applications is experimentally demonstrated. To find effects of key factors, the effects of electric field, medium viscosity, and droplet size are investigated. A scaling law of charging for the conducting droplet is derived from the experimental results. Unlike the case of a perfect conductor, the estimated amount of electrical charge ($Q_{est}$) of a water droplet is proportional to the 1.59 power of the droplet radius (R) and the 1.33 power of the electric field strength (E). (For a spherical perfect conductor, Q is proportional to R2 and E.) It is thought that the differences are mainly due to incomplete charging of a water droplet resulted from the combined effect of electrochemical reaction at electrode and the relatively low conductivity of water. Using this phenomenon, we demonstrate the transport of the charged droplet and fusion of two oppositely-charged droplets. When electric field is subjected sequentially on the electrode, the charged droplet is transported on the electrode. For the visualization of fusion of charged droplets, the precipitation reaction is used. When subjected to a DC voltage, two droplets charged are moving and merging toward each other due to the Coulombic force and chemical reaction is simultaneously occurred by coalescence of droplets. It may be due to the interchange effect of charge. It is shown that the droplet can be used for microreactor where transporting, merging etc. of reagents constitute unit operation.

• 한국분말재료학회지
• /
• 제23권2호
• /
• pp.91-94
• /
• 2016

High-quality colloidal CdSe/ZnS (core/shell) is synthesized using a continuous microreactor. The particle size of the synthesized quantum dots (QDs) is a function of the precursor flow rate; as the precursor flow rate increases, the size of the QDs decreases and the band gap energy increases. The photoluminescence properties are found to depend strongly on the flow rate of the CdSe precursor owing to the change in the core size. In addition, a gradual shift in the maximum luminescent wave (${\lambda}_{max}$) to shorter wavelengths (blue shift) is found owing to the decrease in the QD size in accordance with the quantum confinement effect. The ZnS shell decreases the surface defect concentration of CdSe. It also lowers the thermal energy dissipation by increasing the concentration of recombination. Thus, a relatively high emission and quantum yield occur because of an increase in the optical energy emitted at equal concentration. In addition, the maximum quantum yield is derived for process conditions of 0.35 ml/min and is related to the optimum thickness of the shell material.

• 한국생산제조학회지
• /
• 제23권3호
• /
• pp.218-222
• /
• 2014

A 3D printer was used to fabricate a micro-TAS system for biomedical applications. A polymeric medical device fabrication based on a 3D printer can be performed at atmospheric conditions. A CAD- and CAM-based system is a flexible method to design medical components, and a 3D printer is a suitable device to perform this task. In this research, a 100-micron-wide fluidic channel was fabricated with a high-aspect ratio. A cross-sectional SEM image confirmed its possible usage in a micro-reactor using 3D printers. CNC-machined samples were compared to 3D printer-fabricated samples, and the advantages and disadvantages were discussed. Based on the SEM images, the surface roughness of the 3D printed reactor was not affected by wet or dry conditions due to its manufacturing principle. An aspect ratio of 5 to 1 was achievable with 100-${\mu}$ m-wide fluid channels. No melting was found, and the shape of channels was straight enough to be used for micro reactors.