• Proceedings of the KSR Conference
• /
• 2004.10a
• /
• pp.704-709
• /
• 2004

The wear behavior and the mechanical property of Cu-$TiB_2$ composites were examined. Cu-$TiB_2$ composites were fabricated by hot extrusion and cold drawing with $TiB_2$ contents(1$\∼$5vol.$\%$) and the size of $TiB_2$ particles(10$\mu$m and 20$\mu$m). The pin-an-disk wear test was carried out under dry sliding wear conditions which loads varied with from 20N to 100N. At the time, counterpart wear material used SM45C. The experimental results showed that the friction coefficient and wear rate decreased with increasing the $TiB_2$ contents and decreasing the size of $TiB_2$ particle. Also, the depth of plastically deformed zone decreased with increasing the $TiB_2$ contents and decreasing the size of $TiB_2$ particle.

• Transactions of the Society of Information Storage Systems
• /
• v.10 no.2
• /
• pp.39-44
• /
• 2014

LCD panels are used widely in all sorts of devices. Since glass is the main material used to make the panels, scratch resistance is an important issue in acquiring high quality LCD panels. In this work the wear behaviors of three types of commercially available LCD panel glasses were investigated. A pin-on-reciprocating tribotester was used to perform the wear tests using the glass specimens against a stainless steel ball. The hardness of the specimens was initially obtained. It was shown that the wear amount varied with respect to the applied load as well as the type of glass. The wear pattern of the glass specimen was also characterized using confocal microscopy. It is expected that the results of this work will aid in improving the tribological properties of LCD panel glass.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2000.11a
• /
• pp.59-66
• /
• 2000

An experimental study on the effect of silver particles on the sliding behavior of bearing steels was performed by using a ball-on-disk tribometer. Tests were carried out in ambient air, dry and vacuum. Disks of AISI 52100 were silver-coaled by a thermal evaporation method, and the effects of silver particle transfer on friction were firstly analyzed. In order to understand further the mechanism of silver particles transfer and its effect on friction and wear, pre-compressed silver particles were artificially introduced into the friction interface and the results were compared to those of silver-coated specimens. Results showed that the introduced silver particles produced transfer layers and resulted in low friction. It also showed that this low friction is closely related to the characteristic behavior of transfer layers. Shakedown and rachetting occurred at the friction interface and affected the friction and wear.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2009.10a
• /
• pp.165-166
• /
• 2009

이 연구에서는 SUS304 기판과 Cr-Al-Si-N 코팅사이의 밀착특성을 향상시키기 위하여 하이브리드 증착법으로 Cr Interlayer를 기판위에 증착시킨 후 Cr-Al-Si-N 코팅을 증착하였다. 그리고 Ball-on-disk 마모테스트와 스크래치 테스트를 통해 밀착력, 파괴기구, 그리고 마찰거동 등을 살펴보았다. Cr-Al-Si-N 코팅에 60nm 두께의 Cr Interlayer 삽입되었을 때는 기판에 Cr-Al-Si-N 코팅만 증착되었을 때의 밀착력(${\sim}30N$) 보다 더 우수한 ${\sim}50N$의 밀착력을 나타내었고 내마모성 또한 향상되었다. 밀착력 증가는 Cr Interlayer 삽입에 따른 SUS304 기판과 Cr-Al-Si-N 코팅사이의 전단응력 감소에 기인한 것으로 사료된다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.08a
• /
• pp.66-66
• /
• 2010

알루미나는 높은 온도에서 열적으로 안정되고 경도가 높으며 내화학, 내마모 특성이 우수하며 또한 강도대비 비중이 낮아 무게를 줄일 수 있다는 장점을 가지고 있다. 이러한 특성으로 인하여 우주항공, 국방, 원자력등 극한의 온도를 견뎌야 하는 고도의 신뢰성이 요구되는 고온구 조물로서 응용이 되고 있다. 특히 알루미나를 휘스커 형태로 만들어 세라믹 복합체에 결합 할 경우 복합체의 기지 내에서 강화재의 역할을 함으로써 취성 파괴를 억제하고 열 전도율 저하등의 이점을 가져올 수 있다. 그리하여 본 연구에서는 알루미나 휘스커를 성장을 위하여 Al-triisoproxide계를 이용하여 화학기상증착법으로 가장 안정된 열적 특성을 가지고 온도의 변화에 따라 상 변화가 일어 나지 않는 알파 알루미나 상을 가지는 알루미나 휘스커를 성장시키기 위한 연구를 하였다. 또한 증착 온도, 압력, 입력기체비등 증착 조건을 변화시켜가면서 알파 알루미나 휘스커의 성장 거동을 살펴 보았다. 증착 조건 변화에 따라 알파 알루미나는 막이 증착되는 부분과 휘스커가 성장되는 부분이 있으며 휘스커의 밀집도와 길이방향, 직경방향 성장등 여러 가지 성장 특성을 달리하였다. 이러한 결과를 바탕으로 증착조건에 따른 알파 알루미나 휘스커 성장영역을 도식화하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2002.05a
• /
• pp.38-38
• /
• 2002

Kinetic indentation technique was studied and a method to evaluate wear and fatigue behaviors of irradiated small specimen was suggested. The method is based on both the proportion of elastic and plastic deformation and values obtained by micro-hardness test. The parameters obtained from the diagram of load-indentation depth-time are required to evaluates wear and fatigue properties. Considering the irradiated test specimen, it is one of possible and useful methods to estimate the irradiated wear and fatigue behaviors of the small size specimen. This article briefly describes the status of irradiated material study in domestic research reactor.

• Journal of Powder Materials
• /
• v.31 no.4
• /
• pp.308-317
• /
• 2024

Maraging steel has excellent mechanical properties resulting from the formation of precipitates within the matrix through aging treatment. Maraging steel fabricated by the laser powder bed fusion (LPBF) process is suitable for applications including precise components and optimized design. The anisotropic characteristic, which depends on the stacking direction, affects the mechanical properties. This study aimed to analyze the influence of anisotropy on the wear behavior of maraging steel after aging treatment. The features of additive manufacturing tended to disappear after heat treatment. However, some residual cellular and dendrite structures were observed. In the wear tests, a high wear rate was observed on the building direction plane for all counter materials. This is believed to be because the oxides formed on the wear track positively affected the wear characteristics; meanwhile, the bead shape in the stacking direction surface was vulnerable to wear, leading to significant wear.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.146-146
• /
• 1999

BN은 천연에는 존재하지 않는 인공재료로서 특히 섬아연광형 질화붕소인 c-BN은 다이아몬드 다음가는 고경도, 높은 열전도도를 가지고 있을 뿐만 아니라 다이아몬드와는 달리 철계금속에 대해 화학적으로 매우 안정하기 때문에 다이아몬드의 응용이 매우 제한되고 있는 철강제품의 가공공구, 내마모 코팅재료로서 주목받고 있는 차세대 박막재료이다. 최근 c-BN박막 합성에 관한 많은 연구결과들이 보고되었는데 대부분의 연구자들이 성장하는 박막 표면에 입사되는 이온 에너지 및 유량이 c-BN 합성에 중요한 인자이며, 합성된 박막은 sp2결합층(h-BN)과 sp3결합층(c-BN)이 혼합되어 있음을 알 수 있다. 그러나 기존의 이온빔보조 합성법(IBAD) 공정에서는 입사빔과 증착물질이 공간적, 시간적으로 일치되는 경우에만 입사빔의 운동에너지가 증착공정에 기여하기 때문에 입사빔의 정밀한 에너지 조절이 어렵게 된다. 그러나 음이온 빔 직접 증착법에서는 입사이온빔 자신이 운동에너지를 운반하기 때문에 에너지 조절이 정밀할 뿐만 아니라 이를 통해 BN 박막의 상 및 성장거동을 조절할 수 있게 된다. 본 연구에서는 음이온 직접 증착법을 이용하여 c-BN박막을 합성하고 이의 초기성장층의 성장거동을 조사하였다. 증착시 음이온 빔의 에너지가 Bn 박막의 결정성에 미치는 영향을 알아보기 위하여 100~500eV의 보론 음이온빔을 조사하였으며 질소원으로는 낮은 낮은 에너지 범위의 질소이온을 동시에 공급하였다. FRIR 분석결과, 보론 이온의 에너지가 증가하면 cubic 상의 분율이 증가하였으며 증착된 박막은 15nm 두께의 sp2결합층이 먼저 성장한후 sp3결합층으로의 상전이가 일어났다. 질소이온빔의 에너지는 100eV 일 때 최대 cubic 함량과 두께를 보였으며 그 이상의 에너지에서는 c-BN 박막을 sputter시켰다. AFM 관찰결과, h-Bn층은 날카롭고 방향성을 가진 침상이었으며 c-BN 층은 atomically smooth 한 표면을 관찰할 수 있었다.

• Tribology and Lubricants
• /
• v.36 no.1
• /
• pp.18-26
• /
• 2020

The effects of the carburizing process on the sliding wear behavior of SCM420H steel have been investigated. In particular, the effects of grain boundary corrosion observed in the surface layer after gas carburizing and the effects of hardness of the carburized cases after heat-treatment on the sliding wear properties were examined. Pin specimens carburized by two methods (gas carburizing and vacuum carburizing) were tempered at two temperatures of 180℃ and 400℃ after oil-quenching, respectively. Sliding wear tests were carried out against heattreated SKH51 steel at several sliding speeds using a pin-on-disc type test machine. As results, it can be found that there is no difference in the wear behavior between the pins carburized using two methods. This implies that the grain boundary corrosion that formed in the surface layer after gas carburizing has no effect on the sliding wear behavior of carburized SCM420H steels. Additionally, there is no significant difference in the wear behavior between carburized pins tempered at 400℃ and at 180℃ after oil-quenching, regardless of the carburizing method. This is because carburized pins tempered at 400℃ have a troostite structure, which exhibits higher tribochemical reactivity even though its hardness is lower than that of martensite structure. In this respect, it can be considered that good wear resistance of carburized cases is maintained at least until the effective case depth.

• Tribology and Lubricants
• /
• v.36 no.3
• /
• pp.124-132
• /
• 2020

The effect of the stoichiometry on the sliding wear properties of NiAl coatings has been investigated. Three different powder mixtures with the compositions of Ni-50at%Al, Ni-54at%Al and Ni-42at%Al were diepressed respectively, and which were subsequently coated on mild steel through combustion synthesis in an induction heating system. Sliding wear behavior of the coatings was examined against an alloyed tool steel using a pin-on-disc type sliding wear test machine. As results, it could be seen that powder mixture(Ni-54at%Al) with displaying Al-rich deviations from the stoichiometry of NiAl(Ni-50at%Al) was promoted the most the synthetic reactivity. The microstructure of the coating layer with the compositions of Ni-54at%Al exhibits the porous NiAl single phase structure. However, the microstructure of the coating layer of the compositions of Ni-42at%Al exhibits the denser multi-phase structure containing several intermediate phases in addition to NiAl. Densification of the coating layer was enhanced by increasing the reacting temperature. On the other hand, the wear properties of the coating layers showed that the wear mode at speeds of around 1 m/s was severe wear, regardless of the stoichiometry and reacting temperature. However, wear properties of coating layer with the compositions of Ni-42at%Al were superior to those of coating layer with the compositions of Ni-54at%Al. This would be attributed by the fact that coating layer with the compositions of Ni-42at%Al develops little void and much intermediate phases with high strength.