• Journal of Convergence for Information Technology
• /
• v.8 no.6
• /
• pp.187-192
• /
• 2018

This thesis is about the study of inverter terminal boxes in a explosion proof type exhaust fan that can control wind volume and operating time. In Korea, there is no ventilator to adjust the amount of wind and operating time when working in poor conditions. The purpose of the project is to create a explosion terminal box that can control the operating time and wind speed of a suitable explosion ventilator in hazardous environments. The two explosion-proof switches allow the operation time to be driven 1 hour, 3 hours and continuous time, and the speed of the induction motor rotation was set in 3 stages at 2000 rpm, 2600 rpm and 3000 rpm to control the volume. The tested motor used a half-horsepower barrier three-phase induction motor and a full-bridge inverter to set the desired flow rate and operating time.

• Journal of Advanced Navigation Technology
• /
• v.23 no.1
• /
• pp.44-54
• /
• 2019

In many countries, there are needs of new transportations to replace ground congestions due to growing number of cars. In addition, the increase in the number of cars held by economic growth will further increase traffic congestion in the future. To overcome this problem, many researches have been performed for personal air vehicle (PAV). In this study, the wing loading and the power-to-weight ratio that are major design parameters for the sizing of roadable PAVs were calculated for different kinds of airfoil and engine types. I.e., in the sizing process, the study was conducted to determine the design point using the graphs of wing loading, power-to-weight ratio, brake horse power, and fuel efficiency for the given mission profiles considering domestic environments and the FAR PART 23 which is the GA class aircraft certification standard. As a result of sizing, using diesel engine require high maximum take-off weight, wing area, and power compared to gasoline engine due to more engine weight.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.111-122
• /
• 2018

At present, the ground transportation system is saturated in many countries including Korea. To overcome this problem, many researches of developing a roadable personal air vehicle (PAV) are being carried out to alleviate traffic congestion and to accomplish door-to-door mobility through three-dimensional traffic system. In this study, the thrust-to-weight ratio, the wing loading, and the power-to-weight ratio that are major design parameters for the sizing of roadable PAVs were calculated under the constraints of ground roll, climb rate, maximum cruise speed, service ceiling, stall speed. Also, in the sizing process, the study was conducted to determine the design point using the graphs of thrust-to-weight ratio, wing loading, power-to-weight ratio, and brake horse power for the mission profiles considering domestic environments and the FAR PART 23 which is the GA class aircraft certification standard.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.28 no.6
• /
• pp.1070-1077
• /
• 2022

The International Maritime Organization has recently strengthened its marine environment regulations. The energy efficiency index has long been an important indicator of ship design, and now, energy efficiency is being enforced for existing ships as well as new ships. To increase the energy efficiency of existing ships, methods such as retrofitting the bow bulb, selecting an optimized trim during ship operation, and installing an energy saving device have been applied. In this study, the ship resistance was numerically simulated using computational fluid dynamics (CFD) under various bow and stern trim conditions. In addition, the bulb was redesigned to further improve the resistance performance under the selected trim conditions. When the improved bulb was applied, the effective horse power increased by approximately 5%. It is, however, necessary to verify whether the redesigned bulb can reduce ship resistance in waves.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.135-144
• /
• 2002

A computer simulation was carried out to investigate the optimum capacity of liquid manure tank spreader which is used as a tractor attachment. Soil physical properties, such as soil moisture content, bulk density, soil hardness and soil types were measured in the 10 major rice production area for computer simulation. Mathematical model which include soil physical properties and vehicle factor was used for computer simulation. Most of the soil type of the investigated area was sandy clay loam. Soil moisture content ranged between 30 and 40% mostly. Soil bulk density was in the range of 1,500 to 1,700 kg/$m^3$. Soil hardness ranged between 1 to 18 $cm^2$. Soil hardness incorporate the effects of many soil physical properties such as soil moisture content, soil type and soil bulk density, and so the range of soil hardness is greater than any other physical properties. The capacity of liquid manure tank spreader was above 3,000 kg$_{f}$ for the most of the investigated areas, and mostly in the range of 4,000 to 6,000 $kg_f$ depending upon the slip. But for the soft soil area such as Andong and Asan, the tractor itself has mobility problem and shows no pulling force for some places. For this area, the capacity of liquid manure tank spreader ranged between 1,000 and 2,000 $kg_f$ mostly, so the capacity of liquid manure tank spreader should be designed as a small capacity trailer compared to the other area.mpared to the other area.

• Journal of Korean Society of Forest Science
• /
• v.32 no.1
• /
• pp.29-35
• /
• 1976

In order to estimate sawmill productivities, rates of technical change and optimum combination of production factors, Cobb-Douglas production functions have been derived using data obtained from 96 sample mills in Busan-Incheon, southwestern and northeastern areas. The results may be summarized as follows: 1. There is a tendency of expanding average sawmill size in the areas. The horse-power holdings per mill have been increased at the rates of 91 percent in Busan-Incheon, 7.7 percent in southwestern and 16.9 percent in northeastern areas. This implies that the mills around log-importing ports have made rapid development, compared with those in forest regions. 2. The regression coefficients (production elasticities) of the functions for the year of 1967 in the above three areas are much similar each other, but significant differencies are found in the production functions of 1975. In other words, sawmill productivity was mainly restricted by capital deficiencies in all areas in 1967, but this situation was succeeded only by N-E area in 1975. The range of sum of regression coefficients is 1.0437-1.4214, this indicates increasing rates of return to scale. 3. The annual rates of technical changes in B-I, S-W and N-E areas for the observed period are 17.6, 7.6 and 2.2 percents respectively. Busan-Incheon is the only area where labor productivity is higher than that of capital. 4. The best combination of production factors for maximizing firm's profit is subject to the changes of input and output prices. With some assumptions of prices and costs, the optimum levels of power and labor input in B-I, S-W and N-E areas are 57:17, 427:94 and 192:27.

• Journal of Korean Society of Transportation
• /
• v.24 no.5 s.91
• /
• pp.35-44
• /
• 2006

Acceleration and deceleration curves have been used for design purposes worldwide. The curve in design level has been regarded as an single deterministic curve to be used for design of climb lanes. It should be noted that the curve was originally made using ideal driving truck and that the curve is applied during design based on the assumption of no difference between ideal and real driving conditions. However. observations show that aged vehicles and lazy behavioring drivers nay make lower performance of vehicles than the ideal performance. The present paper provides the results of truck speeds at climbing lanes then probabilistic variation of acceleration and deceleration corves. For these purposes. a study about identification of vehicle makers, and weights for trucks at freeway toll gates and then observation of vehicle-following speed were performed. The 85%ile results obtained were compared with the deterministic performance curves of 180, 200, and 220 Ib/hp. It was identified that the performance of 85%ile results obtained from vehicle-following-speed observations were lower than one from deterministic performance curves. From these results, it may be concluded that at the beginning Point of climbing lanes additional $16.19{\sim}67.94m$ is necessary and that at the end point of climbing lanes $53.12{\sim}103.24m$ of extension is necessary.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2004.11a
• /
• pp.61-70
• /
• 2004

This paper treats optimal route assessment system at seaway based on weather forecasting and wave measurement through observation. Since early times. captain & officer have been sailing to select the optimum route considering the weather ana ship status condition empirically. However. it is rare to find digitalized onboard route support system whereas weather fax or wave and swell chart are utilized for the officer. based on officer's experience. In this paper, optimal route assessment system which is composed of voyage efficiency and safety component is introduced. Optimum route minimized ETA (estimated time of arrival) ana fuel consumption is evaluated for efficient voyage considering speed loss and power increase based on wave added resistance of ship. In the view point of safety, seakeeping prediction is performed based on 3 dimensional panel method. Basically. the weather forecast is assumed to be prepared previously in order to operate this system.

• The Journal of Fisheries Business Administration
• /
• v.37 no.1 s.70
• /
• pp.121-142
• /
• 2006

EU는 당면과제인 과잉 어획능력을 해소하기 위해 공동어업정책하 어업구조정책의 하나로 '다년도지도프로그램(Multi Annual Guidance Programmes: MAGPs)'을 시행해 왔다. 지난 1983년부터 2002년까지 시행된 MAGP는 EU의 어업구조정책의 핵심 요소이다. 이러한MAGP는 최초 EU의 공공원조계획을 위한 체제의 하나로 입안되었으며, 그 목적은 어선 톤수와 마력수에 대한 각 회원국 어선의 능력을 동결하고자 하는 것이었다. 회원국들은 $4{\sim}5$년 주기로 각 국의 어선개발에 대한 정밀한 계획을 세워야하며, 어선의 용량(총톤수와 엔진출력)과 어획노력에 관한 목표들을 달성하도록 되어 있다. 이러한 감소 목표들은 독립된 과학적 조사결과에 따라 EU 위원회에 제안되고, 공동체 선박등록부에 의거 각국의 프로그램에 대한 적정 실현여부를 감시받고 있다. 또한 각 회원국들은 매년 4월 1일까지 EU위원회에 당해 MAGP의 실현에 대한 진도보고서를 제출하는 식으로 운영되어 왔다. 현재까지 4개의 MAGP가 시행되었다. 제1세대 MAGP(1983-1986년)는 회원국들에 강제적인 것은 아닌 관계로 별다른 성과가 없었으나, 공동체 어선들간의 어획능력 증가 경쟁에 대한 제어의 표현으로 의미가 있었다. 제2세대 MAGP(1987-1991년)에서는 처음으로 진출입 제어를 위한 매우 제한된 법규정이 만들어졌으며, 제3세대 MAGP(1992-1996년)에서는 공동체 어선 감소의 실제목표를 수여하는 첫 번째 계획이었다. 그리고 이 계획은 약 15%정도의 매 우 실질적인 어획능력 감소를 이루었다. 가장 최근에 끝난 4세대 MAGP(1997-2002)는 공동어업정책의 개혁 시간을 주기 위하여 1년 연장되었으며, 이 시스템은 만약 어선의 어획구성상 감소되는 어족자원의 비율이 낮으면 그 자원을 보호하고자 하는 것이었으나, 그 성과는 매우 낮았다. 이 4세대 계획의 또 다른 중요한 혁신은 회원국이 그들의 어선의 활동규제와 크기를 결합시키거나, 또는 전적으로 표본어선의 수익성 분석을 통해 어획능력을 제거하고자 하는 것이다. 그러나 이 역시 관리와 통제의 곤란으로 별 다른 성과를 거두지 못한 것으로 평가받고 있다. 그러나 많은 어려움과 제도상 불완전함에도 불구하고 MAGP는 일정한 효과를 거둔 것으로 보고되고 있다. 즉 어획능력은 지난 20년동안 전체적으로 25% 가량 감소하였으며, 특히 오래되고 비효율적인 어선에 대한 감척으로 어획능력 감소에 기여한 것으로 평가되고 있다. 이들 프로그램은 특히 보조금을 통해 어선의 제3국 영구이전과 낡고 비효율적인 어선의 신조를 가속화시킨 것으로 보고되고 있다.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.6-6
• /
• 2017

농용트랙터의 전방차축 현가장치는 노면으로부터 발생하는 진동의 영향을 줄일 수 있기 때문에 트랙터의 대형화, 고속화의 추세에 맞춰서 승차감과 조향감을 향상시키는 데 중요한 역할을 한다. 전방차축의 현가장치는 트랙터의 차체 무게에 의한 부하가 크고, 또한 유압 펌프를 비롯한 유압시스템이 존재하기 때문에 유압식 회로로 구성하는 것이 바람직하다. 하지만, 현가장치의 유압회로를 개발하는데 있어서 실제 시스템을 구성하여 실제 실험을 통한 개발에는 비용과 시간이 많이 필요하다. 본 연구에서는 유압식 전방차축 현가장치에 필요한 유압회로부 개발을 위하여 시뮬레이션 기법과 요인시험 장치를 이용 적정 유압회로를 설계하고자 하였다. 이를 위하여 어큐뮬레이터, 가변 오리피스, 릴리프밸브, 체크밸브 등으로 구성된 유압 현가요인 시험 장치를 설계 제작하였으며, 현가 부품인 실린더 행정, 속도, 전달되는 힘을 측정하고, 유압 해석 프로그램인 SimulationX를 이용 구성된 유압회로 부품에 측정값을 입력하여 실제 조건과 유사한 동특성을 나타내는 전방차축 현가요인 시뮬레이션 모델을 개발하였다. 개발된 시뮬레이션 모델을 이용하여 실제 시험조건과 같은 가진 조건을 부여하여 개발 현가장치의 특성 값 변동에 따른 현가 성능을 구명하였다. 이를 위해 시뮬레이션 상에서 120 마력 트랙터 무게의 50% 수준에 해당하는 2,000 kg의 부하가 존재하는 상태에서 현가장치의 유/무에 따른, 감쇠 계수의 변화에 따른 스프링상 질량의 RMS 가속도를 비교하였다. 입력 가진으로는 1 Hz, 4 Hz, 8 Hz의 진동수에 각각 10 mm, 6.4 mm, 3.2 mm의 진폭을 인가하였다. 시뮬레이션 결과, 1 Hz에서는 현가장치가 있는 경우 최대 55.9% 개선되었고, 4 Hz에서는 최대 3.9 % 개선되었고, 8 Hz에서는 최대 61.4%까지 개선되었다. 이는 4 Hz의 경우에는 2,000 kg의 부하에 해당하는 고유 진동수 대역에 해당하기 때문에 그 감쇠 효과가 없는 것으로 나타났다. 하지만, 다른 주파수 대역에서는 현가장치가 효과적으로 작동하는 것을 나타내었다. 설계한 전방차축 현가 유압회로부를 시뮬레이션을 통하여 분석한 결과, RMS 가속도의 개선이 명확하게 이루어지는 것을 확인하였으며 입력 주파수 변화에 따라 감쇠특성도 나타나는 것을 확인하였다. 추후 연구에는 설계한 유압회로부와 관련 부품을 설계 제작하여 실제 트랙터에 장착 그 성능을 검증할 예정이며, 노면조건에 따라 감쇠성능을 유지하기 위한 반능동형 또는 적응형 현가장치 제어 기술을 적용하여 개선된 현가성능을 확보하기 위한 연구를 수행할 예정이다.