• Proceedings of the Korea Institute of Fire Science and Engineering Conference
• /
• 2011.04a
• /
• pp.371-375
• /
• 2011

전지는 고에너지 밀도 제품으로 화학에너지를 전환시켜 전기에너지를 운반하는 것이다. 본 실험에서는 리튬 이온전지의 열적 안정성의 위험을 평가하기 위하여 리튬이온 전해액을 Differential Scanning Calorimeter(DSC)와 modified cloed pressure vessel test(MCPVT)로 분석하였다. 실험 결과 리튬전지는 다른 전지보다 위험하며, 전지를 잘못 사용하면 열적 반응성은 연소성 물질인 전해질을 포함하고 이것이 열을 발생시켜 폭발하거나 화재가 발생할 수 있음을 제시하였다.

• Applied Chemistry for Engineering
• /
• v.10 no.3
• /
• pp.491-495
• /
• 1999

$Ni_{0.2}V_2O_5$ aerogel (ARG) was synthesized via the sol gel method and has been studied with an emphasis on the characterization of its electrochemical properties. ARG appear to be amorphous layered material. Electron micrograph revealed that entangled fibrous textures has been grown to form anisotropic corrugated sheets. Several sites for the Li ion intercalation exist between the layers of ARG and average cell potential was 3.1 V vs $Li/Li^+$ Th charge transfer resistance increases 3 to 4 times as lithium composition increases, but the interphase resistance remains almost constant regardless of the lithium composition in thc ARG.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.1
• /
• pp.31-35
• /
• 2007

In this review article, we are going to explain the recent development of lithium secondary batteries for a cellular phone. There are three kinds of rechargeable batteries for cellular phones such as nickel-cadmium, nickel-metal hydride, and lithium ion or lithium ion polymer. The lithium secondary battery is one of the most excellent battery in the point of view of energy density. It means very small and light one among same capacity batteries is the lithium secondary battery. The market volume of lithium secondary batteries increases steeply about 15% annually. The trend of R&D is focused on novel cathode materials including $LiFePO_4$, novel anode materials such as lithium titanate, silicon, and tin, elecrolytes, and safety insurance.

• Journal of the Microelectronics and Packaging Society
• /
• v.6 no.2
• /
• pp.69-74
• /
• 1999

Graphite and carbonaceous materials intercalate and deintercalate Li-ion reversibly into their layered structures. These materials show an excellent capacity for using a negative electrode in Li-ion batteries, because the electrochemical potential of Li-ion intercalated carbon is almost identical with that of lithium metal. Carbon used in this study was obtained by the pyrolysis of petroleum pitch, and heat-treated at the several temperatures between $700^{\circ}C$ and $1300^{\circ}C$. XRD analysis revealed that crystallization of carbon increased with increasing the heat treatment temperature. Charge/discharge properties were studied by a constant-current step at the rate of 0.1C, and the interfacial reaction between the electrolyte and the surface of carbon electrode was studied by cyclic voltammetry. Cell capacities were investigated in terms of the heat treatment temperature and the cycle number. Reversible capacity increased with the heat treatment temperature up to $1000^{\circ}C$, thereafter decreased continuously. Also, charge capacity decreased with the cycle number, while the reversibility improved with it.

• Journal of the Korean Vacuum Society
• /
• v.16 no.3
• /
• pp.227-230
• /
• 2007

In the Li ion battery fabrication process, an aging step has treated as a miner step because there is not so much data to define the relationship between the phenomena generated in aging process and the battery performances. However, the OCV(open circuit voltage) change in the aging process is shown by the electrochemical absorption of the electrolyte component to the both electrodes(anode or cathode) and the absorbed layer to the electrode affects to form the solid electrolyte interface(SEI) layer during the first charge process. In this report, the adsorbed materials are designed deliberately and are cleared to affect to the SEI layer formation.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2018.06a
• /
• pp.138-138
• /
• 2018

선박을 통한 해상수송은 세계 무역의 80% 이상을 차지하고 있으며, 대부분의 선박은 저질중유의 연소로부터 추진력을 발생시키는 디젤 엔진을 원동력으로 사용하고 있다. 이러한 디젤 엔진은 연소의 부산물로 매년 백만 톤 이상의 오염물질을 방출하는데, 그 주성분은 탄소로 이루어져 있고 고온 열분해 또는 압축 점화 엔진의 작동 부산물들이 소량 포함되어 있다. 이에 본 연구에서는 선박으로부터 배출된 폐 수트를 리튬이온전지용 도전재로 활용하기 위한 독특한 방법이 제안되었다. 실험에 사용된 폐 수트는 운항중인 컨테이너선으로부터 수집되었으며, 수집된 폐 수트는 탄소 성분 이외의 불순물을 제거하고 흑연화 정도를 개선시키기 위해 $2,000^{\circ}C$로 열처리되었다. 열처리된 폐 수트의 모폴로지를 확인하기 위해 투과전자현미경을 이용하여 그 형상을 관찰하였으며, 이를 통해 폐 수트의 일차 입자는 지름이 약 70-100 nm 정도인 양파껍질 모양의 탄소(carbon nano-onion)로 형성된다는 것이 확인되었다. 또한, XRD, RAMAN 분광법 및 BET 분석 결과를 통해, 열처리된 폐 수트가 결정성이 있는 흑연으로 재형성되었으며 비표면적은 일반적으로 사용되는 활물질에 비해 약간 더 높다는 것을 확인할 수 있었다. 한편, 이러한 특성은 리튬이온전지용 도전재로 활용될 수 있는 가능성을 보여주었고, 이는 전기화학적 정전류 충전 및 방전 테스트를 통해 그 성능이 확인되었다. 일반적으로 사용되는 도전재의 테스트 결과와 폐 수트를 도전재로 사용한 테스트 결과를 Fig. 1에 나타내었다. 이상의 실험 결과들을 미루어 볼 때, 선박으로부터 배출된 폐 수트가 리튬전지용 음극 활물질 및 도전재로 재활용될 수 있을 것으로 사료된다.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1999.11a
• /
• pp.155-155
• /
• 1999

• Applied Chemistry for Engineering
• /
• v.25 no.1
• /
• pp.1-13
• /
• 2014

Lithium ion batteries (LIBs) are the state-of-the-art technology among electrochemical energy storage and conversion cells, and are still considered the most attractive class of battery in the future due to their high specific energy density, high efficiency, and long cycle life. Rapid development of power-hungry commercial electronics and large-scale energy storage applications (e.g. off-peak electrical energy storage), however, requires novel anode materials that have higher energy densities to replace conventional graphite electrodes. Germanium (Ge) and silicon (Si) are thought to be ideal prospect candidates for next generation LIB anodes due to their extremely high theoretical energy capacities. For instance, Ge offers relatively lower volume change during cycling, better Li insertion/extraction kinetics, and higher electronic conductivity than Si. In this focused review, we briefly describe the basic concepts of LIBs and then look at the characteristics of ideal anode materials that can provide greatly improved electrochemical performance, including high capacity, better cycling behavior, and rate capability. We then discuss how, in the future, Ge anode materials (Ge and Ge oxides, Ge-carbon composites, and other Ge-based composites) could increase the capacity of today's Li batteries. In recent years, considerable efforts have been made to fulfill the requirements of excellent anode materials, especially using these materials at the nanoscale. This article shall serve as a handy reference, as well as starting point, for future research related to high capacity LIB anodes, especially based on semiconductor Ge and Si.

• Clean Technology
• /
• v.20 no.2
• /
• pp.154-159
• /
• 2014

In this study, PVC-LMO beads were prepared by immobilizing lithium manganese oxide (LMO) with poly vinyl chloride (PVC) diluted in dimethyl sulfoxide (DMSO) solvent on behalf of N-methyl-2-pyrrolidone (NMP). XRD analysis confirmed that LMO was immobilized well in PVC-LMO beads. The diameter of PVC-LMO beads synthesized by DMSO was about 4 mm. The adsorption experiments of lithium ions by PVC-LMO beads were conducted batchwise. The maximum adsorption capacity obtained from Langmuir model was 21.31 mg/g. The adsorption characteristics of lithium ions by PVC-LMO beads was well described by the pseudo-second-order kinetic model. It was considered that the internal diffusion was the rate controlling step.

• Journal of the Korea Convergence Society
• /
• v.12 no.4
• /
• pp.1-8
• /
• 2021

Currently, lithium-ion batteries are mainly used in energy storage equipment products including automobiles. This can be exposed to dangerous situations such as explosions in the event of incorrect battery management conditions that are overcharged or left in high temperature conditions. It also causes a situation battery cannot be used when it has been over discharged. Therefore, a system that manages the state of the battery is required. The battery management system aims to obtain optimum battery efficiency by accurately recognizing the state of the battery and keeping the voltage of each cell constant. In this paper, we develop a lithium-iron phosphate battery that has higher safety than a general lithium-ion battery. Then, in order to manage this, we try to develop the algorithm of the BMS module based on the Bluetooth communication using the MATLAB-SIMULINK.