• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.392-401
• /
• 2020

Purpose: This study analyzes the operating characteristics of a lithium ion capacitor that can be used as a standby power supply in an emergency, and determines whether the standby power supply is abnormal even by measuring the voltage using a linear proportionality characteristic during charging and discharging. The aim is to provide an experimental basis that can be done. Method: As a method for this study, first, analyze the operation principle and characteristics of the existing backup power supply and lithium ion capacitor, and then measure the voltage of the lithium ion capacitor according to the configuration and system block diagram of the induction lamp used in the experiment. We proceed with the test of the measured value of discharge power for each voltage band to check the amount of power held by the battery and the operation test experiment using induction lamps. Results: Just by checking the charging voltage using the linear proportional characteristics of lithium ion capacitors, it provides a basis for accurately inferring the effective operating time of induction lamp lamps. Conclusion: In the event of a disaster, the lithium ion capacitor is used as a spare power supply for emergency induction lamps to prevent complete discharge of emergency induction lamps, to prevent the problem of performing normal operation of the standby power supply, and to use only a simple voltage measurement to reserve power. It was intended to suggest many uses for evacuation equipment application in the future by making it possible to check whether the device is abnormal.

• Applied Chemistry for Engineering
• /
• v.24 no.5
• /
• pp.489-493
• /
• 2013

The most common carbonaceous anode materials of lithium ion batteries (natural graphite, artificial graphite, hard carbon, and mesocarbon microbeads) were utilized as an electrode in lithium ion capacitors. It could be able to enhance the energy density of capacitors due to the intercalation of lithium ion. In this work, the properties of capacitors using the symmetric electrode were measured by organizing coin cell typed capacitors. Also, we made other capacitors having pre-intercalated lithium ions at one side of the electrode. The results of electrochemical measurements for these capacitors show that the storage capacitance was appeared. In other words, if the migration of lithium ions is supplied continuously in the electrolytes, lithium ions can be diffused into the carbonaceous materials. And it results in the improvement of capacitance compared to only using symmetric carbonaceous electrodes. Also, we conducted the same measurement with graphene oxide having a the large specific area in the same condition. Herein, we recognized that the large specific area is extremely important for supercapacitors.

• Proceedings of the KIPE Conference
• /
• 2012.07a
• /
• pp.275-276
• /
• 2012

최근 노트북 및 UPS, 그리고 전기자동차에 이르기까지 배터리를 사용하는 분야에서 에너지 밀도가 높은 리튬이온 배터리가 주로 사용된다. 이러한 리튬 이온 배터리의 안전성을 보장하고 배터리 수명을 늘리기 위해서는 각 셀 간의 전하 균일이 필요하며 여러 전하 균일 회로가 연구되었다. 이중 자기소자가 없이 능동 전하 균일을 이룰 수 있는 스위치드 커패시터 방식은 가장 간단하고 작은 부피로 제작이 가능하며, 셀 전압 센싱 없이 자동적으로 전하 균일을 이룰 수 있는 장점이 있으나, 전하 균일 속도가 셀 수가 증가 할수록 현저하게 느려지는 단점을 보인다. 제안하는 셀 전하 균일회로는 체인구조의 스위치드 커패시터 회로를 통하여 셀 간의 전하 균일 속도를 향상시킬 수 있다. 본 논문에서는 제안된 회로의 동작원리를 설명하고 실험을 통해 제안된 회로의 뛰어난 전하 균일 성능을 검증한다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.201.2-201.2
• /
• 2015

현대 디지털 사회에서 고효율 에너지와 파워소스에 관한 요구가 커짐에 따라 차세대 에너지 저장 소자에 대한 연구가 계속되고 있다. 그 중 리튬이온 배터리, 슈퍼커패시터, 그리고 연료 전지들이 우리의 일상생활에서 점점 더 중요하게 자리잡아가고 있는데 이런 다양한 에너지 저장소자 중 슈퍼커패시터가 많은 관심을 받고 있다. 이는 긴 수명, 빠른 충-방전 속도, 높은 에너지 밀도, 그리고 안전함 때문이다. 슈퍼커패시터는 에너지 저장 메커니즘에 따라 두 가지로 분류될 수 있는데 전기이중층 커패시터(EDLC)와 슈도커패시터(pseudocapacitor)로 나누어질 수 있다. 슈도커패시터는 active 물질과 전해질 이온 간의 전기화학적 반응으로 인해 EDLC보다 더 많은 에너지를 저장할 수 있다. 그러므로 지금까지 새로운 형태의 슈도용량성 물질을 만들기 위한 노력이 집중되고 있다. 본 연구에서는 전기화학적증착 방법을 통해 graphene-like ${\beta}$-nickel hydroxide (${\beta}-Ni(OH)_2$) 나노판 구조를 전도성 직물에 합성하였다. ${\beta}-Ni(OH)_2$ 슈도커패시터의 유연하고 효율적인 비용의 전극으로서 높은 비정전용량, 우수한 전기화학 가역성, 그리고 뛰어난 사이클 안정성을 보였다. 이런 쉬운 방법으로 유연한 전도성 직물에 합성된 metal hydroxide/oxide 나노구조는 웨어러블 에너지 저장소자와 변환소자 분야에 사용될 것으로 기대된다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.45-47
• /
• 2018

본 논문은 High Altitude Electromagnetic Pulse (HEMP) 응용 분야에 적용되는 리튬 이온 베터리를 이용한 커패시터 충전전원 장치에 관하여 다룬다. 기존에 제안하였던 5.4 kJ/s 고전압 커패시터 충전기를 9 kJ/s 로 용량을 늘렸고, 고전압 커패시터 충전기 후단에 공진 충전 회로를 도입하여 2단 충전 구조로 펄스 방전 시 발생할 수 있는 역전압과 reflecting pulses로 부터 커패시터 충전 전원 장치를 보호한다. 제안하는 충전기의 성능은 시뮬레이션 및 기초 부하 실험을 통해 확인되었다.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.1
• /
• pp.36-42
• /
• 2007

In general, the battery and the(electric) condenser are pictured as electrical energy storage devices. Although there were lots of inventions and utilizations of morden conveniences according to enormous growth of the science and technologies after the Industrial Revolution, a speed of technology development on these devices being closely used in civilized human lives and many electric or electronic systems as a core component are relatively slower to the other fields of technologies. Nevertheless, based on a remarkable progress of the material science and technologies for the last ten years, a new type of electrical energy storage device so called as 'electrochemical capacitors' are being developed and used practically. The electrochemical capacitors exhibit their own characteristics of much enhanced capacitance over the conventional condensers and also distinctively exhibit a longer lift time and higher power capability that the nickel hydrogen batteries and secondary batteries such as lithium ion and polymer batteries does not show up so for. Hence, in this paper, it is intended to introduce a fundamental understanding and updated technology trends on the electrochemical capacitors.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.4
• /
• pp.41-45
• /
• 2021

In this study, in order to secure the high reliability of the memristor, we adopted a patterned lithium filament seed layer as the main agent for resistive switching (RS) characteristic on the 30 nm thick ZrO₂ thin film at the device manufacturing stage. Lithium filament seed layer with a thickness of 5 nm and an area of 5 ㎛ × 5 ㎛ were formed on the ZrO₂ thin film, and various electrode areas were applied to investigate the effect of capacitance on filament type memristive behavior in the parallel memristive circuit of memristor and capacitor. The RS characteristics were measured in the samples before and after 250℃ post-annealing for lithium metal diffusion. In the case of conductive filaments formed by thermal diffusion (post-annealed sample), it was not available to control the filament by applying voltage, and the other hand, the as-deposited sample showed the reversible RS characteristics by the formation and rupture of filaments. Finally, via the comparison of the RS characteristics according to the electrode area, it was confirmed that capacitance is an important factor for the formation and rupture of filaments.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.203-210
• /
• 2005

A study on the hybrid micro power source for the IMT2000 application has been presented. The hybrid micro power source is composed of solar cell, super-capacitor and battery. To compensate for the pulse loader of the IMT2000 application, the super-capacitor is connected through the lithium-lon battery to absorb the pulse discharge current. The solar cell provides the additional current to compensate for the depleted current and it is controlled to operate at the maximum power point voltage. A novel maximum power point tracking method is presented to operate at the pulse discharge load conditions and verified to have superior tracking performance through experiment. The controller design for the hybrid micro power source has been presented and verified through experiment.

• Transactions of the Korean hydrogen and new energy society
• /
• v.26 no.5
• /
• pp.416-422
• /
• 2015

Lithium Ion capacitor (LIC) is a new storage device which combines high power density and high energy density compared to conventional supercapacitors. LIC is capable of storing approximately 5.10 times more energy than conventional EDLCs and also have the benefits of high power and long cycle-life. In this study, LICs are assembled with activated carbon (AC) cathode and pre-doped graphite anode. Cathode material of natural graphite and artificial graphite kinds of MAGE-E3 was selected as the experiment proceeds. Super-P as a conductive agent and PTFE was used as binder, with the graphite: conductive agent: binder of 85: 10: 5 ratio of the negative electrode was prepared. Lithium doping condition of current density of $2mA/cm^2$ to $1mA/cm^2$, and was conducted by varying the doping. Results Analysis of Inductively Coupled Plasma Spectrometer (ICP) was used and a $1mA/cm^2$ current density, $2mA/cm^2$, when more than 1.5% of lithium ions was confirmed that contained. In addition, lithium ion doping to 0.005 V at 10, 20 and $30^{\circ}C$ temperature varying the voltage variation was confirmed, $20^{\circ}C$ cell from the low internal resistance of $4.9{\Omega}$ was confirmed.

• Korean Chemical Engineering Research
• /
• v.56 no.6
• /
• pp.884-889
• /
• 2018

In this study, polyaniline $(PANI)/WO_3$ electrode was prepared as an anode of a lithium ion capacitor, and its electrochemical characteristics were measured and analyzed. When PANI was electrochemically deposited on the surface of $WO_3$ electrode, the capacity of $PANI/WO_3$ was improved with increase of the deposited amounts of PANI. Furthermore, the effect of light irradiation on capacity and coulombic efficiency was examined by irradiating sunlight during charging and discharging. When the light was irradiated to the $WO_3$ electrode and the $PANI/WO_3$ electrode, those capacities and coulombic efficiencies were increased compared to that measured under the dark condition. It is attributed to the photocatalytic property of $WO_3$ that can generate photoelectrons by light irradiation. In $PANI/WO_3$ electrode, PANI also can be excited under the light irradiation with affecting the electrochemical property of electrode. The photoelectrons improve the capacity by participating in the intercalation of $Li^+$ ions, and also improve the coulombic efficiency by facilitating electrons' transport. Under the dark condition, the capacity of $PANI/WO_3$ was gradually reduced with increase of cycles due to a poor stability of PANI. However, the stability of PANI was significantly improved by the light irradiation, which is attributed to the oxidation-reduction reaction originated from the photogenerated electrons and holes in $PANI/WO_3$.