• Fire Science and Engineering
• /
• v.33 no.1
• /
• pp.23-29
• /
• 2019

Rechargeable battery such as lithium-ion battery has been noticed as a kinds of the energy storage system in the recent energy utilization and widely used actually in various small electronic equipment and electric vehicles. However, many thermal runaway caused battery accidents occurred recently, which still is obstacle for advanced application of lithium ion battery. One of the main differences to general fires is the existence of ionized electrolyte with electron during combustion. Therefore, we simply simulated the ion addition effects of battery fires by introducing an ionized fuel in jet diffusion flames. When the ionized methane through a corona discharge was used as fuel, the overall flame stability and shape such as flame length showed no significant difference from normal methane flame, but NOx and CO emissions measured at the post flame region decreased. The ion addition effect of methane oxidation was also numerically simulated with the modeling of hydrogen addition in the mixture. It was confirmed that the hydrogen addition at a fixed temperature had a similar effects on ionization of methane and hence could be modeled successfully.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.07a
• /
• pp.149-152
• /
• 2022

최근 전기차의 기술 발전이 급속도로 증가함에 따라 이차전지의 수요가 증가하게 되었다. 그로인해 다량의 고품질 전지를 생산하기 위해 제조 공장이 가동되고 있지만 생산된 전지의 품질의 핵심이 되는 화성공정의 에이징 과정 진행 중 온도 관리에 실패할 경우, 전지의 폭발 및 화재의 위험이 있다. 본 논문은 이차전지를 생산하는 에이징 공정의 효율적인 온도 관리를 위해 목업 모형을 만들어 온도 센서를 통한 온도 수집 및 모니터링 시스템을 개발하고, 공조기 바람을 통해 전지의 온도가 변화하는 속도를 계산하고, 이상온도에 도달해 고온의 상태가 되었을 경우 주변 전지로 전달되는 열을 시뮬레이션 통한 효율적인 공조 대책을 제시하여 이차전지 생산의 품질 향상과 화재 예방을 통해 전기차 생산에 따른 리튬이온 전지의 수요 해결에 기여한다.

• Fire Science and Engineering
• /
• v.30 no.4
• /
• pp.111-120
• /
• 2016

This is an experimental study to analyze the explosion and fire hazards of mobile phone batteries. Using the lithium-ion batteries currently used on smart phone as the experiment samples, the experiments were conducted by overcharging, internal and external short circuit, and thermal shock with the potential of explosion and fire caused by careless use or abnormal conditions. The experiment results showed that, in the case of overcharging and external short circuit, there was no explosion and fire hazard in the normal operation of the protection circuit module (PCM), but there were big risks when the PCM faulted conditions were assumed. In the case of the experiments by internal short circuit and thermal shock, such risks varied depending on a battery charge state. In other words, it could be verified that there were low risks of explosion and fire in a full discharge state, but there were high risks in a full charge state. These experiment results suggest that to minimize the explosion and fire hazards of mobile phone batteries, an alarm device is necessary when the PCM fault occurs. In addition, a solid battery case should be made and safety equipment, such as a cooling device to avoid high temperature, is needed.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.3
• /
• pp.727-730
• /
• 2023

The operation of electric automatic windows is used in harsh environments, and the energy density decreases as charging and discharging are repeated, and as soundness deteriorates due to damage to the internal separator, the vehicle's mileage decreases and the charging speed slows down, so about 5 to 10 Batteries that have been used for about a year are classified as waste batteries, and for this reason, as the risk of battery fire and explosion increases, it is essential to diagnose batteries and estimate SOH. Estimation of current battery SOH is a very important content, and it evaluates the state of the battery by measuring the time, temperature, and voltage required while repeatedly charging and discharging the battery. There are disadvantages. In this paper, measurement of discharge capacity (C-rate) using a waste battery of a Tesla car in order to predict SOH estimation of a lithium-ion battery. A Support Vector Machine (SVM), one of the machine models, was applied using the data measured from the waste battery.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.2
• /
• pp.127-132
• /
• 2024

Recently, secondary batteries, commonly known as rechargeable batteries, find widespread applications across various industries. Particularly valued for their compact and lightweight characteristics, they play a crucial role in diverse portable electronic devices such as smartphones, laptops, and tablets, offering high energy density and efficient charge-discharge capabilities. Moreover, they serve as vital components in electric vehicles and contribute significantly to the field of renewable energy as part of Energy Storage Systems(ESS). However, despite advancements in this technology, issues such as reduced lifespan, cracking, damage, and even the risk of fire can arise due to excessive charging and discharging of secondary batteries. To address these challenges, Battery Management System(BMS) are employed to protect against overcharging and improve overall performance. Nevertheless, understanding the protective range settings of BMS using lithium-ion batteries, the most commonly used secondary batteries, and lead-acid batteries can be challenging. Therefore, this paper aims to utilize a battery charge-discharge tester and simulator to investigate the charging and discharging characteristics of lithium-ion batteries and lead-acid batteries, addressing the associated challenges of reduced lifespan, cracking, damage, and fire hazards in secondary batteries.

• Smart Media Journal
• /
• v.12 no.11
• /
• pp.103-112
• /
• 2023

Recently, the need to prevent battery fires and accidents has emerged, as the use of lithium-ion batteries has increased. In order to prevent accidents, it is necessary to predict the state of health (SOH) and check the replacement timing of the battery with a lot of degradation. This paper proposes a model for predicting the degradation state of a battery by using four battery degradation indicators: maximum voltage arrival time, current change time, maximum temperature arrival time, and incremental capacity (IC) that can be obtained in the battery charging process, and LSTM using an attention mechanism. The performance of the proposed model was measured using the NASA battery data set, and the predictive performance was improved compared to that of the general LSTM model, especially in the SOH 90-70% section, which is close to the battery replacement cycle.

• Fire Science and Engineering
• /
• v.32 no.6
• /
• pp.91-99
• /
• 2018

Recently, the spread of ESS in Korea has increased and a fire accident has also occurred. By July 2018, there were a total of 7 cases. All 7 cases were ESS systems consisting of lithium-ion batteries and were burned down. Both the automatic fire extinguisher and the fire department were not able to digest. In this paper, the characteristics of ESS fire are analyzed based on recent ESS fire situation and field investigation, and the cause of fire is divided into environmental, electrical and thermal factors. As a result, it was found that the ESS fire was correlated with the installation environment of the system. In the domestic and overseas lithium ion battery test standard and ESS facility standard survey, the trends and differences of domestic and overseas facilities standards were identified. Based on the fire status and field investigationy, and domestic and overseas facility standard survey, measures were suggested to prevent and prevent the spread of fire in ESS fire.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.1541-1542
• /
• 2015

본 논문에서는 휴대용 IT 기기 및 EV, ESS 등 사용이 급증하고 있는 리튬 폴리머 배터리의 화재사고 원인 분석기법에 대하여 나타내었다. 사고 원인 분석기법은 사례분석을 통하여 외형 및 탄화패턴 분석을 통한 발화 추정위치로 외력에 의한 사고 및 내부 절연 열화에 의한 사고 원인 분석 등을 나타내었다. 사고원인 분석은 배터리 안전성 확보와 사고 재발 방지를 위한 대책 마련에 필수적인 기술로 향후 증가하는 제품사고에 대한 분석기법 개발에 기초연구로 활용하고자 한다. 본 논문에서 제시한 분석기술과 향후 내부 절연 열화 원인 분석 기법을 개발하여 리튬 계열 배터리에서 발생하는 사고에 대하여 정확한 원인 분석에 활용할 것이다.

• Journal of the Society of Disaster Information
• /
• v.16 no.2
• /
• pp.383-391
• /
• 2020

Purpose: To identify internal self ignition and ignition caused by external flames in energy storage rooms, and to analyze the difference between ignition due to overheating and ignition caused by external heat sources. Method: membrane melting point measurement, battery external hydrothermal experiment, battery overcharge experiment, comparative analysis of electrode plate during combustion by overcharge and external heat, overcharge combustion characteristics, external hydrothermal fire combustion characteristics, 3.4 (electrode plate comparison) / 3.5 (overcharge) /3.6 (external sequence) analysis experiment. Result: Since the temperature difference was very different depending on the position of the sensor until the fire occurred, it is judged that two temperature sensors per module are not enough to prevent the fire through temperature control in advance. Conclusion: The short circuit acts as an ignition source and ignites the mixed gas, causing a gas explosion. The electrode breaks finely due to the explosion pressure, and the powder-like lithium oxide is sparked like a firecracker by the flame reaction.

• Proceedings of the KIPE Conference
• /
• 2019.11a
• /
• pp.188-189
• /
• 2019

본 논문은 리툼이온 배터리의 화재로 이어질 수 있는 전기적 위협(Electrical abuse) 상황 중 외부단락 상황을 재현하였다. 배터리의 초기 온도상태(60℃, 50℃, 25℃, 15℃)와 외부단락 상황에서 배터리의 최대 발열량과의 상관관계를 분석하였다. 초기온도 60℃ 보다 50℃에서 가장 큰 발열량을 보였다. 초기온도 60℃에서 더 큰 단락전류가 측정되었으나 전류가 인가되는 시간은 50℃에서 더 길어 단락실험간 최대 발열은 온도상태 50℃에서 최대 온도 117℃로 가장 크게 측정되었다.