• Journal of Institute of Convergence Technology
• /
• v.1 no.1
• /
• pp.48-51
• /
• 2011

Transdermal drug delivery device is a method of drug delivery through the skin. Skin has a very large area, so it is attractive route to drug delivery. When drug delivery through the skin, microneedle has a advantage that painless, constant drug deliver and penetration efficient; nevertheless the cost is expensive because fabrication process need a particular equipment and not suitable in mass production. This study shows microneedle fabrication process using convergence of general MEMS process and dicing process that can make 3-D sharp microneedle tip and this fabrication process suitable for mass production.

• Korean Journal of Optics and Photonics
• /
• v.2 no.4
• /
• pp.186-192
• /
• 1991

For the micro-lithography using a excimer laser beam $(\lambda\leq0.248$\mu\textrm{m})$. a mirror system consisting of four spherical surfaces with reductlon magnification 5X is designed. Initially the aplanat, flat field and the distortion free condition of the system are analytically investigated within Seidel 3rd order aberrations. And the computer-aided optimization technique has been employed for the further improved performance of the system. The final system has N.A. of 0.15 and image field diameter 3.3 mm, and has the diffraction-limited performance for KrF eximer laser beam.

• Korean Journal of Optics and Photonics
• /
• v.6 no.3
• /
• pp.188-200
• /
• 1995

A design of unit magnification 2-mirror system with high resolution is presented. It is for soft X-ray(wavelength of 13 nm) projection imaging and suitable for preparation of high density semiconductor chip. In general, a holosymmetric system with unit magnification has the advantage that both coma and distortion are completely eliminated. In our holosymmetric 2-mirror system, spherical aberration is addtionally removed by using two identical paraboloidal mirror surfaces and field curvature aberration is also corrected by balancing Petzval sum and astigmatism which depends on the distance between two mirrors, so that the system is a aplanatic flat-field paraboloidal 2-mirror holosymmetric system. This 2-mirror system is small in size, and has a simple configuration with rotational symmetry about optical axis, and has also small central obscuration. Residual finite aberrations, spot diagrams, and diffraction-based MTF's are analyzed for the check of performances as soft X-ray lithography projection system. As a result, the image sizes for the resolutions of$0.25\mum$and $0.18\mum$are 4.0 mm, 2.5 mm respectively, and depths of focus for those are $2.5\mum$, $2.4\mum$respectively. This system should be useful in the fabrication of 256 Mega DRAM or 1 Giga DRAM. DRAM.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.42-47
• /
• 1998

We have fabricated electron-optical lens for micro E-beam system that can overcome the limitation of current E-beam lithography. Our electron-optical lens consists of multiple silicon electrodes which were fabricated by micromachining technology and assembled by anodic bonding. The assembled system was installed in UHV chamber to observe the emission characteristics of focused electrons by the electro-optical lens. We used STM(Scanning Tunneling Microscope) tip for electron source. By performing lithography with the focused electrons with PMMA(poly-methylmethacrylate) as E-beam resist. We could draw 0.13${\mu}{\textrm}{m}$ nano-scale lines.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.62-69
• /
• 1998

We demonstrated the character display unit using a binary phase hologram array and a liquid crystal-spatial light modulator (LC-SLM). It combines the dynamic property of the LC-SLM with the high-efficiency property of the phase hologram fabricated by photolithography. Experimental results of the proposed unit are presented. The character display unit proposed in this paper has a fundamental and important meaning as new method displaying images by using light, and it will be used in optical information processing and optical communications fields.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.28 no.10
• /
• pp.1541-1548
• /
• 2004

A nano-stage simulation tool is developed for an advanced E-beam lithography system. Even if piezo-actuators are believed to be compatible fer the E-beam lithograpy system it is difficult to predict their characteristics due to their nonlinearities such as hysteresis and creep. In this paper, the nonlinear properties are modeled for a piezo-actuator by considering the voltage range and speed variations. The hysteresis is described as the first order differential equation with 24 sets of parameters and the creep is modeled as a time-dependent logarithmic function with 2 sets of a parameter. A two-axis nano stage with piezo-actuators are investigated for realizing nano scale motions. The characteristics of flexure guide mechanisms are analyzed based on the finite element method using the ANSYS software. The simulation tool for the nano stage is constructed by using the RecurDyn software. The dynamic response of the nano stage is obtained in simulations and compared with the experimental data.

• Journal of the Korean Society of Visualization
• /
• v.5 no.1
• /
• pp.3-8
• /
• 2007

We present simple methods for fabricating high aspect-ratio polymer nanostructures on a solid substrate by rigiflex lithography with tailored capillarity and adhesive force. In the first method, a thin, thermoplastic polymer film was prepared by spin coating on a substrate and the temperature was raised above the polymer's glass transition temperature ($T_g$) while in conformal contact with a poly(urethane acrylate) (PUA) mold having nano-cavities. Consequently, capillarity forces the polymer film to rise into the void space of the mold, resulting in nanostructures with an aspect ratio of ${\sim}4$. In the second method, very high aspect-ratio (>20) nanohairs were fabricated by elongating the pre-formed nanostructures upon removal of the mold with the aid of tailored capillarity and adhesive force at the mold/polymer interface. Finally, these two methods were further used to fabricate micro/nano hierarchical structures by sequential application of the molding process for mimicking nature's functional surfaces such as a lotus leaf and gecko foot hairs.

• Journal of the Korean Vacuum Society
• /
• v.6 no.4
• /
• pp.321-325
• /
• 1997

Recently, photosensitive color filters have received much attention for their use in the liquid crystal display (LCD) industry. It is well known that chemical and physical properties of polymer surfaces can be modified by special surface treatments. In this work, we have studied the polymer surfaces of LCD blue color filters which were exposed to the UV light during photolithography. A better understanding of the irradiated polymer surfaces is required for the subsequent processes such as plasma etching, ITO electrode deposition, etc. The surface analysis has been undertaken using secondary ion mass spectrometry (SIMS), x-ray photoelectron spectroscopy (XPS), and atomic force microscopy (AFM). A significant enrichment of the pigment component and roughening of surface with bubble-like feature have been observed at the modified polymer surface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.316-316
• /
• 2013

실리콘(Si)은 이미지 센서, 포토검출기, 태양전지등 반도체 광전소자 분야에서 널리 사용되고 있는 대표적인 물질이다. 이러한 소자들은 광추출 또는 광흡수 효율을 향상시키는 것이 매우 중요하다. 그러나 Si의 높은 굴절율은 표면에서 30% 이상의 반사율을 발생시켜 소자의 성능을 저하시킨다. 따라서, 표면에서의 광학적 손실을 줄이기 위한 효과적인 무반사 코팅이 필요하다. 최근, 우수한 내구성과 광대역 파장 및 다방향성에서 무반사 특성을 보이는 서브파장 주기를 갖는 나노격자(subwavelength grating, SWG) 구조의 형성 및 제작에 관한 연구가 활발히 진행되고 있다. 이러한 구조는 경사 굴절율 분포를 가지는 유효 매질을 형성시킴으로써 Fresnel 반사율을 감소시킬 수 있어 반도체 소자 표면에서의 광손실을 줄일 수 있다. 그러나, SWG나노구조는 식각에 의한 표면 결함(defects)들이 발생하게 된다. 이러한 결함은 표면에서의 재결합 손실을 발생시켜 소자의 성능을 크게 저하시킨다. 이러한 문제를 해결하기 위해, 표면 보호막 및 무반사 코팅 층을 목적으로 하는 산화막을 표면에 형성시키기도 한다. 따라서 본 실험에서는 레이저간섭리소그라피 및 건식 식각을 이용하여 Si 기판에 SWG 나노구조를 형성하였고, 제작된 샘플 표면 위에 실리콘 산화막(SiOx)을 furnace를 이용하여 형성시켰다. 제작된 샘플들의 표면 및 식각 profile은 scanning electron microscope를 사용하여 관찰하였으며, UV-vis-NIR spectrophotometer 를 사용하여 빛의 입사각에 따른 반사율을 측정하였고, 표면 접촉각 측정 장비를 이용하여 표면 wettability를 조사하였다.

• The Optical Journal
• /
• s.153
• /
• pp.47-62
• /
• 2014

${\blacksquare}$ 목적 * 우리나라 주력산업분야(자동차, 조선, 항공, 기계, 로봇, 반도체 등)에 절단, 가공, 용접, 리소그라피, 마킹, 열처리, 합성, 표면처리 등의 방식으로 활용되고, 융 복합산업(의료, 에너지, 영상, 군수, 신소재, 센서)에 광원으로 응용되는 산업용 고출력 레이저의 산업 생태계 분석을 통하여 기존 산업의 고부가화와 신산업의 경쟁력을 견인 ${\blacksquare}$ 주요현황 * (시장현황) 2011년부터 2014년까지 고출력 레이저의 시장규모는 4,452백만불(5조 463억원)에서 5,255백만불(5조 9,565억원)으로 연평균 5.7% 성장 전망 * (제품기술동향) 3세대 레이저인 광섬유 레이저와 고출력 다이오드 레이저, DPSS 레이저 등이 기술혁신을 거듭하면서 1, 2세대 레이저를 대체해 가면서 높은 수준의 성장을 거듭할 것으로 전망. 산업용레이저의 주요선진국 대비 국내 기술수준은 전체적으로 44.5%정도로 취약 * (기업동향) Coherent, Trumpf, Cymer, IPG Photonics, Rofin-Sinar 5개사가 전체시장의 55%이상을 점유하고 있으며 대부분 수직계열화를 통해 경쟁력 확보. 최근 중국의 Han's 사가 자국정부의 지원을 통해 급 부상 ${\blacksquare}$ 시사점 * 산업용 레이저를 이용한 응용기술 부분 투자가 과거에는 단기 경제적 성취는 이로웠으나, 현재에 이르러 레이저 혹은 레이저 시스템이 필요할 때마다 외국에서 관련 핵심부품, 모듈 등을 수입해야하는 실정에 이르렀음. 향후 레이저 국산화를 위한 노력과 함께 후방 소재.부품의 전략적 투자를 통해 산업의 건강한 선순환생태 환경을 조성하여 산업 경쟁력을 갖추어야 함.