• Korean Journal of Environment and Ecology
• /
• v.38 no.3
• /
• pp.310-323
• /
• 2024

The purpose of this study was to understand the vegetation structure and ecological characteristic of Bulgapsan(Mt.) Provincial Park by setting up and surveying 64 plots(100m²). The analysis using the TWINSPAN and DCA techniques found seven community groups: Pinus densiflora-Quercus variabilis community, P. densiflora-P. rigida-Q. serrata community, Q. variabilis-Carpinus tschonoskii community, Q. aliena-Q. variabilis-Cornus controversa community, Q. aliena-Platycarya strobilacea community, Broad-leaved miced community and Q. variabilis community. The result of vegetation community structure analysis showed that P. densiflora community and deciduous Quercus spp. community were in competition, and succession to Quercus spp. community was expected. In the case of other broad-leaved forests, the current status is expected to be maintained. But continuous monitoring is required in areas where Neolitsea sericea and Cephalotaxus appear, which grow naturally in warm temperate forest and southern temperate vegetation zone. Species diversity by communities are confirmed to be highest at 2.6654 in the actively competitive P. densiflora-P. rigida-Q. serrata community, and the lowest in the Deciduous broad-leaved forests community at 1.2548. The results of the tree rings and annual growth analysis showed that dominant trees had an average age of more than 37~87 years. Among them, N. sericea designated as a natural monument was 48~56 years old.

• Journal of Korean Society of Forest Science
• /
• v.87 no.3
• /
• pp.466-474
• /
• 1998

This study was conducted to evaluate heavy metal concentrations(Cd, Cu, Z, and Pb) in the soil of two zinc mines and to correlate heavy metal contents between the soils and trees growing near the mines. Soils and leaves, stems, and roots of five tree species(Corylus heterophylla, Pinus rigida. Populus alba${\times}$glandulosa, Rhododendron mucronulatum, and Robinia pseudoacacia) were collected from Sambo Zinc Mine located in Hwasung and Gahak Zinc Mine in Kwangmyung city in Kyonggido. Soils near two zinc mines were not seriously contaminated by heavy metals, but Zn and Pb concentrations were at toxic level. The heavy metal concentration in soils decreased in the order of Zn, Pb, Cu, and Cd, and decreased with increasing distance from zinc mining sites. Among the five tree species, Populus alba ${\times}$ glandulosa showed the highest heavy metal concentrations in the tissue except for Pb. Particulars, leaves of the species contained the high concentrations of heavy metals to reach the maximum of 91ppm Zn. The roots of Corylus heterophylla contained high concentrations of Cu and Pb. The order of heavy metal concentrations in the tree species was Zn, Cu, Pb and Cd. The concentration of heavy metals in the tree tissues showed a positive correlation with that in soil in which trees are growing. The ratio of heavy metal concentration of trees to that of soils(concentration factor : CF) was highest in Zn and lowest in Pb. Populus alba${\times}$glandulosa had the highest CF value among the five tree species. It was concluded that Populus alba${\times}$glandulosa, based on the high metal uptake ability, could be used for decontaminating of heavy metals from contaminated soils, and Pinus rigida could be used to reflect the level of contamination in soils.

• Korean Journal of Environmental Biology
• /
• v.20 no.3
• /
• pp.216-223
• /
• 2002

This study was carried out to classify forest vegetation community of Dodeokbong and Baekwunbong in Gyeryongsan. Employing the releve method of Dierssen, 89 plots were sampled. Forest community was classified into Quercus mongolica community, Quercus serrata community, Quercus variabitis community, Pinus densiflora community, Carpinus laxiflora community, and Pinus rigida-Pinus thunbergii community. Quereus mongolica community was found in high altitude and steep area, Quercus serrata community in relatively low altitude and steep slope area, and Quercus variabilis in southern arid and low area compared with Quercus mongolica community. Pinus densiflora community is present in relatively high altitude and narrow arid ridge area. And, Carpinus laxiflora community is mainly distributed in southern valley area. Pinus rigida-Pinus thunbergii community is planted community.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.3
• /
• pp.213-220
• /
• 2018

In order to use Pitch pine (Pinus rigida Miller) as the material of the structural glued laminated timber, the effect of the amount of resin exudation due to storage time after the planning and the knot of the lamina were evaluated on the bonding properties of the glued board with resorcinol resin. For Pitch pine that was dried at high temperature ($120{\sim}95^{\circ}C$) and low temperature ($65{\sim}50^{\circ}C$), the flat sawn(tangential section) showed higher amount of resin exudation than the quarter sawn(radial section). And the low temperature drying wood showed higher resin exudation than the high temperature drying wood. The low and high temperature drying wood showed the highest amount of resin exudation on the 3rd day and 7th day, respectively and they were gradually decreased. However, there were no significant differences from 15 to 90 days. Adhesion performances were low until 2~3 days with high exudation of resin, but there were no significant differences after 15 days. Both high temperature and low temperature drying woods satisfied the Korean standard regardless of the storage time. The adhesive strengths of the laminating parts including knots were higher than those of KS criteria, but the wood failures were not satisfied the KS standard. Adhesive performances according to the laminating combinations (quarter sawn + quarter sawn, flat sawn + flat sawn, quarter sawn + flat sawn) were better than those of KS criteria in all laminating combinations in both high temperature and low temperature drying woods.

• Journal of agriculture & life science
• /
• v.45 no.2
• /
• pp.15-20
• /
• 2011

This study was conducted to estimate the aboveground biomass and net primary production of 40 year old Pinus rigida forest in Sancheong, Gyeongnam province. The aboveground biomass was $127.7Mg\;ha^{-1}$ and $103.1Mg\;ha^{-1}$ of which were found from stem, $17.2Mg\;ha^{-1}$ from branch and $7.4Mg\;ha^{-1}$ from leaf. Biomass distribution ratio of Pinus rigida stands showed the highest in stem wood with 71.1%, followed by the branch with 13.5%, stem bark with 9.6% and lastly the leaf with 5.8%. Net primary production of aboveground biomass was $10.4Mg\;ha^{-1}$ and $3.6Mg\;ha^{-1}$ were found from stem, $2.2Mg\;ha^{-1}$ from branch, $1.3Mg\;ha^{-1}$ from twig and $2.8Mg\;ha^{-1}$ from leaf. Net primary production distribution ratio of Pinus rigida was 34.6% on stem wood, 26.9 on leaf, 21.2% on branch, 12.5% on twig and 4.8% on stem bark.

• Journal of Energy Engineering
• /
• v.23 no.1
• /
• pp.7-20
• /
• 2014

The optimal woodchip production system was developed and the production cost of a forest woodchip fuel was calculated for utilizing the pitch pine, which covers around 480,000ha nationwide. the marginal price of the woodchip fuel considering the factor of supply price, electricity and heat selling price as well as capacity factor were suggested and the economic sensitivity analysis was conducted for various scenario. The most important variable which determine economic feasibility was a fuel cost for the power generation facility. If the electricity price is higher than the current SMP(System Marginal Price) or the capacity factor is higher than 80%, there fully is a benefit to consume the woodchip fuels produced in the suggested production system in this study. In addition, the additional benefit becomes more obvious when considering REC(Renewable Energy Certificate) and CDM(Clean Development Mechanism). Therefore, it is strongly suggested for domestic power generation sector to utilize the forest biomass fuel to achieve the obligatory target of RPS.

• Journal of the Korean Wood Science and Technology
• /
• v.19 no.2
• /
• pp.56-64
• /
• 1991

The destructed chips(Pinus rigida Mill) were sulfonated under different conditions and defiberated. The yields and strengths of pulp, fatty acid and resin acid in sulfonated chips were determined. The results of this work were as follows: 1) A sulfonation caused a yield reduction to 97.9~88.2% at single stage. and to 94.9~88.2% at two stage pretreatment. The pulp yields were rapidly draped with increasing cooking temperature from $130^{\circ}C$ to $150^{\circ}C$ 2) Pulp strengths were improved with iacreasing cooking temperature. A sulfonation with 5% $Na_2SO_3$/NaOH(8/2) at single stage and 2% NaOH-5% $Na_2SO_3$ at two stage were most effective and gave the best combination of strength properteis. 3) Fatty acid esters in chips were mostly consisted of palmitic and olleic acid. During a sulfonation the former increased extensively, and the latter was lost with increase of cooking times. The amount of pimaric type in the chips was relatively decreased by the pretreatnent and abietic-type increased. But the changes between two resin acid types were insignificant. 4) The effciency of pitch removal was dependant upon cooking liquor pH. To remove sufficiently the resinous substance, the chips must be sulfonated at over pH 12. Therefore, taking account of pitch removel, two stage sulfonation is considered suitable as reinforcement pulp for newsprint manufacture from pitch pine chips : 2% NaOH($60^{\circ}C$ 1 hr) at first stage and 5% $Na_2SO_3$ ($130^{\circ}C$, 1hr) at secund stage.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.4
• /
• pp.46-51
• /
• 2004

The objective of this study was to evaluate the applicability of high temperature drying to pitch pine (Pinus rigida) lumber, especially intended for use as lamina of structural glued laminated timber (glulam), to enhance the efficient utilization and provide added-value to that species. The high temperature schedule and drying procedures utilized were shown to be reasonable for drying glulam lamina due to the occurrence of small moisture gradients, minimal residual drying stress, and low warpage. Through preliminary tests, it was confirmed that residual resin at lamina surfaces did not adversely affect the gluing process. However, quantitative analysis of resin is required for developing a method to constrain the occurrence of pitch trouble with respect to decreasing long-term adhesive and finish durability of glulam in use after manufacturing. The final moisture content of high temperature dried lamina was much lower than target moisture content and discoloration was more severe than anticipated. In a further study, it will be necessary to determine the optimal drying conditions, such as temperature, humidity, drying time, and top load restraint level, which could best control discoloration, warpage, and moisture content of the lamina, while minimizing fuel expense.

• Journal of Korea Foresty Energy
• /
• v.20 no.2
• /
• pp.46-57
• /
• 2001

This study was conducted to provide tending operation information for the effective management in unmanaged artificial forests of Pinus densiflora for. erecta, Pinus rigida, and larix leptolepis, based on the study of the comparison of tree growth pattern by residual stand density after thinning practices. Followings are summarized results of this study. 1. The diameter growth of residual trees was increased as residual stand density decreased by thinning practices in the stands of Pinus densiflora for. erecta, and Pinus rigida, and subcompartment (Ga) and (Na) of Larix leptolepis. The statistical analysis noted that the tree growth was significantly different by the residual stand density. 2. The height growth did not show corresponding results by stand density treatment pattern, which indicated that the height growth was not directly influenced by residual stand density, but by site quality of the stand. 3. The diameter increment for the last six years was proportionately increased in larger diameter classes and less dense stands.

• Journal of Korean Society of Forest Science
• /
• v.112 no.4
• /
• pp.472-489
• /
• 2023

This study was conducted to derive the optimal estimation equations for deriving the green and dry weights of Larix kaempferi (Japanese larch) and Pinus rigida (Rigida pine), which are major coniferous tree species in South Korea. The equations were then used to develop weight tables. Table development began with the sampling of 150 L. kaempferi and 90 P. rigida trees distributed throughout the national scale, after which green weights were measured on-site. Samples from each stand were then collected, and their dry weights were measured in a laboratory. The equation used to calculate green and dry weights was divided into a one-variable formula that uses only the diameter at breast height (DBH) and a two-variable equation that employs DBH and height. The equations used to estimate the green and dry weights of logs were divided into one- and two-variable equations using DBH. Statistical data, such as the fitness index (FI), root mean square error, standard error of estimation, and residual diagram, were used to verify the suitability of the estimation equations. Applicability was examined by calculating weights using the derived optimal equations. The equation W = bD+cD² was used in measurements involving only DBH, whereas the equation W = aD^bH^c was employed in cases involving both diameter and height at breast height. The FI of W = bD+cD² was 0.91, while that of W = aD^bH^c was 0.95, both of which are high values. With these estimation formulas, weight tables for the green and dry weights of L. kaempferi and P. rigida were prepared and compared with weight tables created 20 years ago. The green and dry weight tables of both species were larger.