• Journal of the Korean Recycled Construction Resources Institute
• /
• v.7 no.1
• /
• pp.82-91
• /
• 2019

In this study, in order to evaluate Hydration Heat Characteristics of mass concrete using ternary blended cement for large underground structures, the analysis considering the temperature history and the thermal characteristics inside the actual structure was performed. The results of the analysis are compared with the measured values to verify the reliability of the analysis and to evaluate the crack resistance performance. As a result of the measured the actual structure temperature, The adiabatic temperature rise coefficients K and ${\alpha}$ of the slab were $35.1^{\circ}C$ and 0.72, respectively, and the wall was analyzed as $29.3^{\circ}C$ and 0.67. The analytical results and the correlation coefficients(r) were 0.95 and 0.98, respectively. As a result of evaluating the crack resistance of slab and wall, the minimum crack index of slab and wall was 1.22 and 1.20, respectively. These results were found to satisfy the site management standards.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.21 no.1
• /
• pp.137-153
• /
• 2019

Estimating tunnel construction time and costs are the most fundamental part of a tunnel project planning, which has been generally assessed on a deterministic basis until now. In this paper, excavation cycle time was investigated for two road tunnels and one subway tunnel, and the results were compared with the Standard of Construction Estimate (SE), which is made for the estimation of construction time and cost in a design stage. The results show that the difference in cycle time between SE and actual cycle time is 50%, 7% and 31% respectively for the three tunnels, which means that SE does not reflect practical operation time. The major reasons of the difference are skilled level of tunneling workers, the change of operation sequences for more effective operations, much more complicated working atmosphere in a tunnel than the assumption of SE etc. Finally, even though the results can not be generalized since investigated tunnels are only 3, but it is thought that SE needs to be upgraded into the model able to consider quite common situations through additional tunnel investigation and studies in the future.

• The Korean Journal of Archival Studies
• /
• no.47
• /
• pp.5-49
• /
• 2016

Compared with public archives, personal archives are likely to disappear if creators don't preserve and manage them. So personal archives must be managed by oneself. But it's difficult to manage their archives systematically for people who don't have the expertise in archival science. Besides, there are not enough available informations. So this thesis suggests how to manage personal archives by two steps. First step is figuring out one's own archives through analyzing one's life by top-down approach and organizing them into collection. Second step is conducting archival appraisal by three steps and establishing classification schemes, describing them. Especially, this study adduce description elements using ISAD(G) for personal archives. this study also recommends using blogs on portal to manage one's archives easily. But they don't have the audit train and exporting function. So this thesis emphasizes the necessity of 'customized archive blogs'. At conclusion, this study highlights the necessity of developing education programs and manuals for people who are trying to manage one's own archives.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.7
• /
• pp.20-25
• /
• 2019

In this paper, the structural weakness analysis and quality improvement of small fixed wing UAV of the hard landing type were studied. Unlike conventional aircraft, small UAV does not use runways because of its small size. Instead, small UAV use hand launch takeoff and hard landings. This type has many operational advantages because it can take off and land in a narrow space. But, the hard landing has a strong impact on the structure of the UAV and can cause serious damage. In order to analyze the exact cause of this phenomenon, the structural analysis was carried out using the 3D structural analysis program (ABAQUS) to identify the location of the fracture. And to improve the accuracy of the structural analysis, properties of the material were obtained through specimen test. As a result of the analysis, structural weaknesses were identified and improved. Thus, the validity of the study was verified by demonstrating the quality of enhanced structure through a real impact test at a higher level of 1.5 times the maximum impact during operation.

• Journal of Life Science
• /
• v.29 no.5
• /
• pp.607-613
• /
• 2019

The purpose of this study was to investigate the effects of either chrysin or exercise on the inflammasome and thermogenic markers in the livers of high-fat fed mice. C57BL/6 mice were randomly assigned to four groups: normal diet control (NC; n=5), high-fat diet control (HC; n=5), high-fat diet with chrysin (Hch; n=5), and high-fat diet with moderate exercise (HME; n=5). The mice were fed a high-fat diet (60% of calories from fat) or normal diet (18% of calories from fat). Chrysin was supplemented orally as 50mg/kg/day dissolved in a 0.1ml solution of dimethyl sulfoxide. The exercised mice ran on a treadmill at 12-20 m/min for 30-60 min/day, 5 times/week, for 16 weeks. After the intervention, the epididymal fat and liver weights were significantly decreased in the HME group compared with HC and Hch groups. The adipocyte size was effectively decreased in the Hch and HME groups compared with the HC group. The inflammasome markers NLRP3, $IL-1{\beta}$, and caspase1 were significantly decreased in the Hch and HME groups compared with the HC group. The thermogenic markers $PGC-1{\alpha}$ and BMP7 were significantly lower in the HC than in the NC group. However, the HME group showed an increase in the thermogenic markers. In conclusion, chrysin and moderate exercise have positive effects on obese metabolic complications induced by high-fat diets by reducing inflammasome genes. However, chrysin supplementation had no effect on thermogenic gene expression. Moderate exercise would therefore seem to be more effective in controlling obesity-induced metabolic deregulation.

• Journal of the Korean Society of International Agriculture
• /
• v.30 no.4
• /
• pp.339-346
• /
• 2018

Cyanazine is a member of the triazine family of herbicides. Cyanazine is used as a pre- and post-emergence herbicide for the control of annual grasses and broadleaf weeds. This experiment was conducted to establish a determination method for cyanazine, as domestic unregistered pesticide, residue in major agricultural commodities using HPLC-DAD/MS. Cyanazine was extracted with acetone from representative samples of five raw products which comprised apple, green pepper, Kimchi cabbage, hulled rice and soybean. The extract was diluted with saline water and partitioned to dichloromethane for remove polar extractive in the aqueous phase. For the hulled rice and soybean samples, n-hexane/acetonitrile partition was additionally employed to remove non-polar lipids. The extract was finally purified by optimized florisil column chromatography. On a $C_{18}$ column in HPLC, cyanazine was successfully separated from co-extractives of sample, and sensitively quantitated by diode array detection at 220 nm. Accuracy and precision of the proposed method was validated by the recovery experiment on every major agricultural commodity samples fortified with cyanazine at 3 concentration levels per agricultural commodity in each triplication. Mean recoveries were ranged from 83.6 to 93.3% in five major representative agricultural commodities. The coefficients of variation were all less than 10%, irrespective of sample types and fortification levels. Limit of quantitation(LOQ) of cyanazine was 0.02 mg/kg as verified by the recovery experiment. A confirmatory method using LC/MS with selected-ion monitoring(SIM) technique was also provided to clearly identify the suspected residue.

• Science of Emotion and Sensibility
• /
• v.24 no.3
• /
• pp.17-26
• /
• 2021

This study investigated the association between depression and oral health and the factors influencing depression in adults. Data on 13,199 people (male 5,793, female 7,406; age ≥19 years old) were extracted from the Korean National Health and Nutrition Examination Survey VIII (KNHANES VIII) (2016~2018) and analyzed using frequency, percentage, an x² test, a T-test, and logistic regression analysis. Depression was defined as either a medical diagnosis or a score ≥10 on Patient Health Questionnaire-9. The probability of depression was found to be statistically different for general characteristics, such as gender, age, school grade, income, and drinking. The logistic regression analysis showed that the independent variables, general health awareness (OR=9.094, 95% CI 7.139~11.585) and oral health awareness (OR=1.936, 95% CI 1.465~2.560), were associated with depression, and speaking discomfort, chewing discomfort, oral pain (within 1 year), and prosthesis were found to increase depression probability. The depression probability was also was found to significantly increase by 1.81 times if brushing frequency was less that once a day, if people used dental floss (OR=1.42), and had to have an oral examination (OR=1.31). These results indicated that oral health and oral health behaviors are associated with the depression, with the influencing factors having oral health and behavior-related characteristics. Therefore, proper oral health and oral health risk factor behavior management programs should be developed to assist in reducing depression.

• Korean Journal of Materials Research
• /
• v.29 no.11
• /
• pp.720-726
• /
• 2019

Recently, research on cost reduction and efficiency improvement of crystalline silicon(c-Si) photovoltaic(PV) module has been conducted. In order to reduce costs, the thickness of solar cell wafers is becoming thinner. If the thickness of the wafer is reduced, cracking of wafer may occur in high temperature processes during the c-Si PV module manufacturing process. To solve this problem, a low temperature process has been proposed. Conductive paste(CP) is used for low temperature processing; it contains Sn57.6Bi0.4Ag component and can be electrically combined with solar cells and ribbons at a melting point of $150^{\circ}C$. Use of CP in the PV module manufacturing process can minimize cracks of solar cells. When CP is applied to solar cells, the output varies with the amount of CP, and so the optimum amount of CP must be found. In this paper, in order to find the optimal CP application amount, we manufactured several c-Si PV modules with different CP amounts. The amount control of CP is fixed at air pressure (500 kPa) and nozzle diameter 22G(outer diameter 0.72Ø, inner 0.42Ø) of dispenser; only speed is controlled. The c-Si PV module output is measured to analyze the difference according to the amount of CP and analyzed by optical microscope and Alpha-step. As the result, the optimum amount of CP is 0.452 ~ 0.544 g on solar cells.

• Journal of the Korean Geotechnical Society
• /
• v.37 no.8
• /
• pp.25-35
• /
• 2021

Recently, the ground anchor method is commonly applied with nail and rock bolt to secure the stability of slopes and structures in Korea. Among them, permanent anchor which is used for long-term stability should secure bearing capacity and durability during the period of use. However, according to recent studies, phenomenon such as deformation to slope and the reduction of residual tensile load over time have been reported along the long-term behavior of the anchors. These problems of reducing residual tensile load are expected to increase in the future, which will inevitably lead to problems such as increasing maintenance costs. In this study, we identified the factors that affect the tensile load of permanent anchor from a literature study on the domestic and foreign, and investigated the prior studies that analyzed previously conducted load cell monitoring data. Afterwards, using this as basic data, the load cell measurement data collected at the actual site were analyzed to identify the tensile load reduction status of anchors, and the long-term load reduction characteristics were analyzed. Finally, by aggregating the preceding results, proposed a technique to predict the long-term load reduction characteristics of permanent anchors through short-term data to around 100 days after installation.

• (The)Study of the Eastern Classic
• /
• no.62
• /
• pp.117-143
• /
• 2016

This paper aims to reveal the thoughts of Confucian Hong chanyu illuminate the literary activity. Hong chanyu is representative of the modern and contemporary Confucian scholars. In chapter 2, a Confucian scholar said the spirit of the Hong chanyu. He was considered unnecessarily cause and form. He thought it was a real need and times of where they live. Hong chanyu it was called moderation. Chapter 3 examined the literary activities of the Hong chanyu. One section made of a Chinese poetical circles for background. Gwansu meeting was created in winter 1976. member was of 13 people. They visited the natural scenery and historical sites found. And it was expressed written poetry.Section 2 says what kind is this Chinese poem they have created. The first is the content eulpeun history. The second is more satire in the world. The third is content to enjoy the tasteful in nature.