• Proceedings of the Acoustical Society of Korea Conference
• /
• 1998.06e
• /
• pp.3.2-6
• /
• 1998

본 논문에서는 실측된 실내 충격 응답을 모델링하여 실내 잔향 필터 설계를 시도하였다. 급강하법(steepest descent method)을 이용하여 측정된 실내 충격 응답을 4개의 콤 필터(comb filter)와 2개의 올패스 필터(allpass filter)로 이루어진 잔향 필터로 모델링하여, 잔향 필터의 계수를 결정하였다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.5C
• /
• pp.654-654
• /
• 2004

본 논문에서는 이산웨이블렛 변환을 이용한 영상 압축 프로세서를 하드웨어로 구현하였다. 웨이블렛 변환을 위하여 필터뱅크 및 피라미드 알고리즘을 이용하였고 각 필터들은 FIR 필터로 구현하였다. 병렬구조로 이루어져 동일 클럭 싸이클에서 하이패스와 로패스를 동시에 수행함으로써 속도를 향상시킬 뿐 아니라 QMF 특성을 이용하여 DWT 연산에 필요한 승산기의 수를 절반으로 줄임으로써 하드웨어 크기를 줄이고 이용효율 또한 높일 수 있다. 다중 해상도 분해 시 필요한 메모리 컨트롤러를 하드웨어로 구현하여 DWT 계산이 수행되므로 이 융자는 단순한 파라메터 입력만으로 효과적인 압축율을 얻을 수 있도록 구조적으로 설계하였다. 실시간 영상압축 프로세서의 성능 예측을 위하여 MATLAB을 통하여 시뮬레이션 하였고, VHDL을 이용하여 각 모듈들을 설계하였다. 설계한 영상압축기는 Leonaro-Spectrum에서 합성하였고, ALTERA FLEX10KE(EPF10K100 EFC256) FPGA에 이식하여 하드웨어적으로 동작을 검증하였다. 설계된 부호화기는 512×512 Woman 영상에 대하여 33㏈의 PSNR값을 갖는다. 그리고 설계된 프로세서를 FPGA 구현 시 35㎒에서 정상적으로 동작한다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.7
• /
• pp.1433-1438
• /
• 2011

Relative attenuations of Tx and Rx in K-PCS and US-PCS duplexers were about -60dB and -65dB, -51dB and -53dB, respectively. In the case of Rx and Tx in K-PCS and US-PCS bandpass filters, relative attenuations were about -40dB and -14dB, -5dB and -10dB, respectively. From the aboved results, the relative affect between Tx and Rx in K-PCS bands was smaller than that of US-PCS bands. Also, the various capacitances of passband were important role to determine the characterics of bandpass filter.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.26 no.2
• /
• pp.213-217
• /
• 2015

Microwave Photonic(MWP) filters capable of use a bandpass filter or a notch filter with large bandwidth have been proposed. 4-lines${\times}$2-bit fiber-optic delay lines with a unit time-delay difference of 50 ps were experimentally realized. By changing the time-delay difference and the coefficients of microwave-modulated optical signals, the bandpass and notch filters were implemented and characterized.

• Proceedings of the IEEK Conference
• /
• 2000.09a
• /
• pp.255-258
• /
• 2000

본 논문에서는 효율적인 면적의 저전력 FIR 필터를 제안한다. 제안된 필터는 6 비트 8 탭의 구조를 갖는PRML(Partial-Response Maximum Likelihood) 디스크드라이브 read channel용 FIR 필터이다 제안된 구조는 병렬연산 구조를 채택하고 있으며 네 단의 파이프라인 구조를 가지고 있다. 곱셈을 위하여 부스 알고리즘이 사용되며 압축기를 이용하여 덧셈을 수행한다. 저전력을 위해 CMOS 패스 트랜지스터를 사용하였으며 면적을 줄이기 위해 single-rail 로직을 사용하였다 제안된 구조를 0.65㎛ CMOS 공정을 이용하여 설계하였으며1.88 × 1.38㎟의 면적을 차지하였고 HSPICE 시뮬레이션 결과 3.3V의 공급전압에서 100㎒로 동작시 120㎽의 전력을 소모한다. 제안된 구조는 기존의 구조들에 비해 약 11%의 전력이 감소했으며 약 33%의 면적이 감소하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.4
• /
• pp.59-64
• /
• 2023

In this paper, It is proposed through the empirical design of a Conducted EMI filter for noise reduction of power used in electronic devices. For the proposed structure, A-type, B-type, C-type, and D-type structures were designed, and conductive noise reduction was confirmed by using an LC network with various X-capacitors, Y-capacitors, and Air-inductors. 10 [μH] was used for L1 and L2, and 4.7 [nF] was used for C1 and C2. L3 for common mode used 13[μH], and C5, C6, C7 were designed using 10[nF]. The measured insertion loss values of the designed EMI filter were -74.4[dB] at 3.2MHz, -75.4[dB] at 4MHz, and -75.3[dB] at 13.56MHz. Therefore, the proposed EMI filter will be able to reduce power supply noise used in various electronic devices.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.19 no.4
• /
• pp.562-569
• /
• 2010

This paper analyzes the problems that occurred in the magnification process for a fine input image and investigates a method to improve the blurring of magnified image. This paper applies a curve interpolation algorithm in CAD/CAM for the same test images with the existing image algorithm in order to improve the blurring of magnified image. As a result, the nearest neighbor interpolation, which is the most frequently applied algorithm for the existing image interpolation algorithm, shows that the identification of a magnified image is not possible. Therefore, this study examines an interpolation of gray-level data by applying a low-pass spatial filter and verifies that a bilinear interpolation presents a lack of property that accentuates the boundary of the image where the image is largely changed. The periodic B-spline interpolation algorithm used for curve interpolation in CAD/CAM can remove the blurring but shows a problem of obscuration, and the Ferguson' curve interpolation algorithm shows a more sharpened image than that of the periodic B-spline algorithm. For the future study, hereafter, this study will develop an interpolation algorithm that has an excellent improvement for the boundary of the image and continuous and flexible property by using the NURBS, Ferguson' complex surface, and Bezier surface used in CAD/CAM engineering based on the results of this study.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.44 no.9
• /
• pp.40-47
• /
• 2007

For image processing hardware, including a face detecting engine, efficient constitution of external and internal memories is a consequential point because huge memory is required to store various signal processing filters and incoming images. In this paper, we modified a face detect algerian of a general filter method for efficient hardware design. In the hardware, several memory design techniques are presented for efficient handling of image data : re-accessing avoidance with minimized internal memory usage, residing frequently accessed memory and sequence memory accessing. The hardware which can process 25 frame image data per one second with 40KB internal memory was verified by using ARM(S3C2440A) and Virtex4 FPGA and it is being fabricated as a ASIC chip using Samsung CMOS 0.18um technology.

• Journal of the Korean Geographical Society
• /
• v.43 no.1
• /
• pp.36-51
• /
• 2008

As the global warming has influenced on various sectors including agriculture, forestry, fisheries and health, it is essential to project more accurate future climate for an assessment of climate change impact and adaptation strategy. This study examines spatial distribution of onset dates and durations of season decomposed by applying a lowpass filtering using observed 30-year (1971-2000) data and projected 2090s data based on the IPCC SRES A1B emission scenario in South Korea. In general, the distributions of spring and winter onset date are affected by latitudes, topography and proximity to oceans. However, onset dates of summer and autumn are a little affected by proximity to oceans and topography than by latitudes. In the 2090s (2091-2100), the onset dates of spring begin about 40 days earlier and the onset dates of summer begin 25-30 days earlier as compare with present time. On the other hand, the onset dates of winter begin about 50 days later in the southern and eastern coastal area and in the southern inland. The onset dates of autumn begin about 20 days later. In the 2090s, summer duration is longer and winter duration is shorter as compare with present time at southern and eastern coastal area.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.20 no.4
• /
• pp.333-341
• /
• 2008

A remote sensing technique to identify trajectories of breaking waves in the surf zone using oblique digital nearshore videos is proposed. The noise arising from white foam induced by wave breaking has hindered accurate remote sensing of wave properties in the surf zone. For this reason, this paper focuses on image processing to remove the noise and wave trajectory identification essential for wave property estimation. The nearshore video imagery sampled at 3 Hz are used, covering length scale(100 m). Original image sequences are processed through image frame differencing and directional low-pass image filtering to remove the noise characterized by high frequencies in the video imagery. The extraction of individual wave crest features is conducted using a Radon transform-based line detection algorithm in the processed cross-shore image timestacks having a two-dimensional space-time domain. The number of valid wave crest trajectories identified corresponds to about 2/3 of waves recorded by the in-situ sensors.