• 제목/요약/키워드: 로터 폴

검색결과 5건 처리시간 0.021초

로터 폴 단조 공정의 정밀 삼차원 시뮬레이션 및 결과의 검증 (Three-Dimensional Simulation of a Rotor Pole Forging Process and Verification of the Results)

  • 고병호;이민철;제진수;전만수
    • 한국정밀공학회지
    • /
    • 제19권12호
    • /
    • pp.158-162
    • /
    • 2002
  • In this paper, the usefulness of a three-dimensional forging simulation technique is verified through its application to process design in rotor pole forging. A simulator, AFDEX3D developed based on the rigid-plastic finite element method and hexahedral elements, is employed. The simulated results of an application example found in a precision forging company are compared with the actually forged ones in detail. It has been verified that the simulation results are in good agreement with the actual phenomena.

앨터네이터 로터폴의 단조가공에서 공전개선과 금형제작에 관한 연구 (A Study on the Manufacturing of Die and Improvement of Process in Fiorging Work of Alternator Rotor Pole)

  • 김세환
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1997년도 춘계학술대회 논문집
    • /
    • pp.54-61
    • /
    • 1997
  • Furthermore the rothor pole, with a solid type, manufactured by cold forging process at present should dmploy 3 press lines which consist of total 7 processes. Since A.S.B. treatment is prerequisite for the press line, the 3 times of A.S.B. treatment requires a long lead time, with little contribution to the reduction in cost. The author has investigated, through this researach, the possibility of a new forging method for a rotor pole production with (1) 2 pass instead of 3 press lines (2) only one A.S.B. treatment instead of 3 ones (3) solid type instead of sectional type, and (4) improvment of material property during process using a modified forging process and a specially designed die.

  • PDF

사면체요소와 육면체요소를 이용한 삼차원 단조 시뮬레이션 결과의 비교 및 검증 (Three-dimensional Forging Simulation with Tetrahedral Elements and Hexahedral Elements and their Comparison with Experiments)

  • 이민철;백종파;전만수
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2007년도 춘계학술대회A
    • /
    • pp.1637-1641
    • /
    • 2007
  • In this paper, we simulate a rotor pole cold forging process by a forging simulator with both tetrahedral and hexahedral element capabilities and compare the predictions obtained by the two approaches with the experiments. Hexahedral element capability runs manually while tetrahedral element capability runs automatically with help of an intelligent remeshing technique. It is shown that the tetrahedral element capability can give quite accurate solution if assisted by the intelligent remeshing technique even though the tetrahedral element itself is not theoretically and numerically clear.

  • PDF

온간단조금형의 수명연장에 관한 연구 (A Research on Lengthening the Life of Warm Forging Die)

  • 김세환
    • 한국산학기술학회논문지
    • /
    • 제11권1호
    • /
    • pp.49-54
    • /
    • 2010
  • 자동차의 A.C 제너레이터(alternating current generator) 부품으로 사용되는 로터폴(rotor pole)을 가공할 때는 트랜스퍼온간단조금형(transfer warm forging die)으로 성형한다. 소재를 온간가공 영역으로 가열한 후 즉시 금형안으로 이송시켜 제1스테이지(1st stage)에서 업세팅가공(upsetting work)하고 제2스테이지(2nd stage)로 이송하여 측방압출(lateral extrusion)가공을 한다. 이때 측방압출 스테이지의 금형에서 다이블록(die block), 다이부싱(die bushing), 센터펀치(center punch), 사이드펀치(side punch)의 접촉면이 압출시의 과혹(過酷)한 조건에 견디지 못하여 쉽게 마멸(abrasion)되어 금형수명(die life)을 단축시키고 있다. 이 때문에 생산량 감소로 인한 납기지연, 금형의 수리보수시간 과다, 제품의 정밀도 저하 등의 문제점이 발생되고 있다. 이러한 문제점을 해결하기 위하여 금형재질 선정과 열처리 작업 싸이클 개선, 방전가공시의 트러블 해소, 핵심부품의 구조변경 등을 연구하여 금형수명을 40~50% 연장 하고자 하였다.