• 제목/요약/키워드: 로터치형

검색결과 22건 처리시간 0.021초

스크류 로터 치형의 성능해석에 관한 연구 (A study on performance analysis of screw rotor profiles)

  • 박세정;최상훈
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1993년도 추계학술대회 논문집
    • /
    • pp.627-631
    • /
    • 1993
  • 스크류 압축기는 진동이 적고, 소형이면서 고효율을 유지하기가 용이하다는 특징을 가지고 있으며, 원통형 밀패용기 내에 암,수로터가 서로 반대 방향으로 맞물려 회전하면서, 로터홈과 케이싱 사이에 생기는 공간의 용적이 로터회전에 의해서 가스를 흡입, 압축, 배출하는 합축기 이다. 본 연구는 로터의 치형 함수의 기하학적성질 및 제한사항을 고려하여, 대칭 치형을 치수의 조합과, 원, 점, 직선, 타원을 사용하여 비대칭 치형을 설계하였다. 본 연구의 목적은 설계된 치형과 기존의 치형을 치형 형상의 변화에 따른 특성값 (실라인길이, 누설삼각형, 용적곡선, 흡입 및 토출 홈면적)의 변화에 대하여 연구함으로서 성능검토를 시도하였다.

  • PDF

내접형 기어펌프용 로터의 소음저감을 위한 치형 최적설계 (Optimal Design of Rotor Profile of Internal Gear Pump for Noise Reduction)

  • 배준호;배원병;주웅탁;김철
    • 대한기계학회논문집A
    • /
    • 제38권3호
    • /
    • pp.295-302
    • /
    • 2014
  • 내접형 기어펌프의 경우 내구성과 소형화의 장점을 가지고 있으나, 유량증대 및 소음저감의 성능개선이 요구되고 있다. 본 논문에서는 외부로브 형상이 다양한 곡선 조합(타원 1-인볼루트-타원 2)인 경우에 대하여 기구학적 치형 형상 관계식을 유도하고, 창성된 치형에 대해 소음에 관계된 성능인자(압력각, 유량맥동과 미끄럼률)를 예측하여 소음정도를 수치적으로 비교하였다. 또한 이론 해석을 통해 구한 치형형상과 성능인자 예측 알고리즘을 통하여 설계변수와 성능인자간의 영향도를 분석하였고, 분석 결과를 바탕으로 일정한 유량성능을 유지하면서 소음이 저감된 치형의 최적설계를 수행하였다. 해석결과를 바탕으로 제시된 치형의 최적설계에 대한 시제품 제작 및 소음 시험을 통해 설계의 타당성을 검증하였다.

회전이동 및 병진이동 알고리즘을 이용한 조합된 치형형상(3-타원 및 타원-인벌루트-타원)을 갖는 지로터의 최적설계 (Optimal Design of Gerotor with Combined Profiles (Three-Ellipse and Ellipse-Involute-Ellipse) Using Rotation and Translation Algorithm)

  • 배준호;이호률;김철
    • 대한기계학회논문집A
    • /
    • 제39권2호
    • /
    • pp.169-177
    • /
    • 2015
  • 내접형 기어펌프에 사용되는 지로터의 경우, 소결 공정기술의 발달로 복잡한 형상의 가공이 용이하며 내구성과 소형화의 장점이 있으나, 자동차의 연비효율 개선을 위한 유량증대 및 소음저감을 위한 연구가 요구되고 있다. 본 논문에서는 기존의 병진이동에 의한 지로터 치형의 형상조합 알고리즘이 가지는 형상 불연속성을 개선하기 위하여 회전이동 및 병진이동을 이용한 형상조합 알고리즘을 개발하였으며, 이를 토대로 개발된 설계 프로그램을 이용하여 3-타원이 조합된 경우와 타원 1-인벌루트-타원 2 이조합된 경우에 대해 치형형상을 도출하고, 형상에 따른 로터의 주요성능(유량, 유량맥동, 미끄럼률 및 압력각)을 계산하였다. 해석결과를 토대로 조합된 치형형상에 대한 최적설계를 수행하였으며, 기존 치형과의 성능 비교를 통하여 설계의 타당성을 검증하였다.

스크류 로터의 가공을 위한 CUTTER의 치형설계

  • 한재찬;홍영식;최상훈
    • 한국정밀공학회:학술대회논문집
    • /
    • 한국정밀공학회 1992년도 추계학술대회 논문집
    • /
    • pp.86-90
    • /
    • 1992
  • 스크류 압축기는 진동이 작고 맥동이 적으며, 소형이고 고효율이라는 특징이 있다. 또한 식품, 화학, 전자공업 등에서 무윤활식 압축기로 사용되어지고 있다. 본 연구에서는 호프로 자른 것과 같은 다각형 오차를 만들지 않고 매끄러운 면을 얻을 수 있는 스크류 로터의 축직각 단면좌표를 이용한 cutter의 형상을 설계하는 것을 목적으로 한다.

스크류 로터 가공용 커터의 치형설계에 관한 연구 (The Design of Cutter profiles for Manufacturing Rotors of Screw Compressor)

  • Park, S.H.
    • 한국정밀공학회지
    • /
    • 제14권10호
    • /
    • pp.109-118
    • /
    • 1997
  • The purpose of this paper is to design cutter profiles for manufacturing rotors of screw compressor, which are based on universal milling machine. The surface profile of screw rotor which is helicoidal is derived as brief equation through the coordinates transformation of the section perpendicular to rotor axis. And the equations of contact lines between a cutter and the surface profile of screw rotor are derived. The computer program which can analyze the equation of contact lines numerically and design the cutter profiles of screw rotor is made, and verified through measuring screw rotors which are menufactured as the designed cutter by the computer program.

  • PDF

스크류 로터 치형의 성능해석에 관한 연구 (A Study on performance analysis of screw rotor profiles)

  • 최상훈;김동현
    • 한국정밀공학회지
    • /
    • 제13권1호
    • /
    • pp.69-77
    • /
    • 1996
  • To design high-effective profile in screw rotor profile using in screw compressor, we design the symmetric type changing the number of lobes and the non-symmetric type changing the neighbourhood of the top point of lobe. Then, we calculated the performance value of profile according to the scale of these non-symmetric's wrap angle. We had the results as follows. 1. About the non-symmetric case, the larger a wrap angle is the shorter seal line is and the smaller blow hole is, thus we know what the large wrap angle profile is better than the small one. 2. We know what the non-symmetric profile is better than the symmetric profile in the result of the compare of seal line's length, blow hole's area, volume curve. 3. About the non-symmetric case, the deformation of the neighbourhood of lobe's top point of the rotor profile has a large effect upon the increase of performance because the length of seal line became short and the area of blow hole is small.

  • PDF

비대칭형 스크류 로터용 플라이커터의 치형설계에 대한 연구 (Design of Fly-Cutter for Antisymmetric Screw Rotor)

  • 최상훈
    • 대한기계학회논문집A
    • /
    • 제21권1호
    • /
    • pp.45-52
    • /
    • 1997
  • In this study, we designed tooth profile of the fly-cutter for antisymmetric rotor which is used in screw compressor. In order to verify this profile, we manufactured three different pairs(J46, N46, P46) of antisymmetric rotor using fly-cutter. We got the following conclusions from this study. (1) We obtained better contact condition using 3pairs of rotor which are manufactured by the fly-cutter. (2) We could prevent the cutter interference near bottom point of the robe of screw rotor.

대칭형스크류로터의 커터설계와 진동특성에 관한 연구 (Design of Cutter Profile and the Characteristics of Vibration for Symmetric Screw Rotor)

  • 최상훈
    • 소음진동
    • /
    • 제5권2호
    • /
    • pp.257-264
    • /
    • 1995
  • We designed the cutter profile for symmetric screw rotor and did vibration experiment of screw rotor manufactured by the designed cutter profile. The results of this study are summarized as follows. (1) We designed the cutter profile of screw rotor (4-6)(5-6) by using numerical analysis program. (2) The maximum amplitude and variation of amplitude of 5-6 profile rotor are about 30 - 36.7% and 10 - 25% smaller than those of 4-6 profile rotor, respectively. (3) As the angular velocity of rotor changes from 100 to 300 rpm, the vibration of X, Y axis in driving shaft of 5-6 profile rotor is about 10 - 20% smaller than that of 4-6 profile rotor.

  • PDF