• Journal of the Korean Society of Propulsion Engineers
• /
• v.24 no.6
• /
• pp.120-125
• /
• 2020

75 tonf liquid rocket engine combustion test was performed at Naro space center Engine Combustion Test Facility for KSLV-II. A gradual pressure drop was observed during off-design combustion test turbopump inlet condition using cooled kerosene at 271 K. It was found that the water content inside kerosene could cause pressure drop at 40 ㎛ grade filter through the water contests analysis of kerosene, kerosene cooling test and dehydration of kerosene.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.16 no.5
• /
• pp.37-46
• /
• 2012

The calculation model for heat transfer analysis of rocket engine combustion chamber considering film-cooling has been established. Convective, radiative heat transfers and film-cooling effect in combustion chamber were evaluated using empirical equations especially for rocket engine combustors, and for heat transfer outward from chamber wall general convective and radiative equations were applied. Structural grid has been generated inside chamber wall for FVM calculations, and transient thermal analyses were carried out by time-marching techniques. LOx/kerosene rocket engine with chamber pressure of 50 bar has been analysed, and it is shown that, in that case, the film-cooling less than 4% remarkably contributes to reduce wall temperature, but the effect of the effect of film-cooling more than about 4% is not significantly increased.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2011.11a
• /
• pp.885-891
• /
• 2011

This paper describes the results of preliminary design of rocket engine test facility for the performance evaluation of liquid rocket engine. Design specification and composition of rocket engine test facility are suggested based on the design requirements. The results of the preliminary design of rocket engine test facility will be used as base data for the detail design and construction of rocket engine ground test facility of KSLV-II 75tonf liquid rocket engine.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.25 no.1
• /
• pp.50-57
• /
• 2021

Engine cool down process is necessary for the liquid rocket engines using cryogenic propellants in order to meet the requirement of engine inlet temperature. This paper evaluates the cool down characteristics of oxidizer supply pipeline and engine in prechill process prior to the engine firing tests, and calculate the quantity of liquid oxygen consumption.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.4
• /
• pp.334-340
• /
• 2015

Engine derating is often considered for reliability benefits because lower power operation reduces its failure probability. To be derated during operation, however, the engine must be initially overdesigned. The engine overdesign is cost effective only if reliability increased from derating is enough to offset the initial increase in the development cost caused from the overdesign. The purpose of this paper is to provide an analytical model to consider a trade-off between the engine overdesign and derating. We use a logistic regression model to explain reliability growth in the number of hot firing tests for a fixed power level. Using the Transcost model with the reliability growth model, we show that 10% overdesign of Titan rocket engine decreases its development cost by about 9% and 23% depending on the reliability requirement. We also point out that such a cost reduction depends on the fuel type a rocket uses.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.32 no.10
• /
• pp.93-101
• /
• 2004

A method to calculate stability limits is investigated to predict the characteristics of high-frequency combustion instability in liquid-propellant rocket engine. It is based on the theory of linear stability analysis proposed in previous works and useful to predict combustion stability at the beginning stage of engine development. The system of equations governing reactive flow in combustor has the simplified and linearized forms. The overall equation expressing stability limits is adopted. The procedures to evaluate quantitatively each term included in the equation are proposed. The thermo-chemical properties and flow variables required in the evaluation can be obtained from calculation of thermodynamic equilibrium, CFD results, and experimental test data. Based on the existent data, stability limits are calculated with actual rocket engine (KSR-III rocket engine). The present calculations show the reasonable stability limits in a quantitative manner and the stability characteristics of the engine are discussed. The prediction from linear stability analysis could be serve as the first approximation to the true prediction.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.30-30
• /
• 2000

액체로켓엔진의 단일추진제 가스발생기는 연료공급 시스템의 터보펌프를 구동시키기 위한 작동가스 생성을 목적으로 사용된다. 고체추진제 가스발생기와 비교할 경우 작동시간이 보다 길고 연소생성물에 의한 터빈 블레이드의 삭마가 없으며 제어가 용이하므로 초기 액체로켓엔진 개발시부터 사용되어 왔다. 80년대 이후 개발된 액체로켓엔진은 이원추진제 가스발생기 또는 연소가스 FEEDBACK 시스템을 채용하고 있지만 단일추진제 가스발생기는 과산화수소수 또는 하이드라진과 같은 별도의 추진제 공급 시스템을 필요로 하는 단점에도 불구하고 상대적으로 낮은 온도의 무연 작동 가스를 발생하므로 가스발생기 자체를 위한 냉각시스템을 제거 또는 최소화 시켜 간단한 구조로 전체 시스템 설계를 가능하게 하므로 중소형 액체로켓엔진에 사용되고 있다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.287-293
• /
• 2010

본 연구에서는 개방형 로켓엔진시스템의 제어시스템을 구성하기 위한 선행연구로서, 시동특성을 예측하기위해 Simulink 모델을 구성하였다. 구성품별 동특성 모델을 바탕으로 로켓엔진시스템의 예측 프로그램을 구성하였으며, 대상으로 하는 시스템의 천이 작동상태에서의 동특성 변화의 예측과 더불어 그 모델링의 타당성 검증을 위하여 실제 개방형 로켓엔진 상사모델의 수류실험을 통해 실험적으로 측정하여 비교하였다. 또한 Simulink모델이 제어시스템을 구성하기위해 적합한지를 판단하기위해 기 수행된 천이 동특성 예측 프로그램의 결과와 비교하였고 검증하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.5 no.4
• /
• pp.67-74
• /
• 2001

Based on the national space development project, the necessity of developing liquid propellant rocket engine is revealed to secure the basic technology for the development of individual artificial-satellite launcher. Consequently, KARI (Korea Aerospace Research Institute) is developing a liquid propellant rocket engine for the KSR-III. Currently, a prototype engine using kerosene/LOx which produces 13-ton thrust is designed, fabricated and tested. In this paper, test procedure and technique for liquid propellant rocket engine are introduced with the analysis of static and dynamic test data.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2004.10a
• /
• pp.239-242
• /
• 2004

In this paper, the general mathematical model of LRE(Liquid Rocket Engine) is presented. For the analysis about the trend of dynamics and the stability of open type LRE, it is transformed to linear model by Laplace transform and synthesized to the linear complex model of LRE with Matlab/Simulink.