• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2002.11a
• /
• pp.269-274
• /
• 2002

최근에 TV의 축구, 야구와 같은 스포츠 중계 방송에서 팀의 로고나 점수, 거리와 같은 그래픽 정보를 운동장에 합성시켜 보여주는 새로운 기술이 사용되고 있다. 이는 증강현실(AR: Augmented Reality)의 한 분야인 실시간 이미징 합성 기법을 사용한 것으로서 일반적으로 가상이미징 시스템이라 불리운다. 본 논문에서는 방송용 카메라의 렌즈와 팬(pan), 틸트(tilt) 축에 센서를 부착하여 이를 해석함으로써, 실시간으로 3차원 그래픽 좌표계의 가상 카메라를 제어하는 센서기반 가상이미징 시스템의 구현 결과와 관련기술을 소개한다. KBS 기술연구소에서는 실시간 가상이미징 시스템을 개발하여 'VIVA(Virtual Imaging & Virtual Advertising)'라 이름지었다. 이 시스템은 렌즈 데이터에 근거하여 카메라 캘리브레이션을 수행하며, 주밍(zooming)시 발생하는 카메라의 시점(view point) 변화를 반영하여 원거리 촬영이 이루어지는 스포츠 중계뿐만 아니라 보다 정확성이 요구되는 스튜디오 내의 근거리 프로그램 제작에도 사용이 가능하다. 합성되는 그래픽은 실세계와 같은 완전한 3차원 좌표 공간에 놓이게 되며, 월드 좌표계와 카메라 좌표계를 이용하여 사전 제작된 오브젝트들을 원하는 곳에 위치시킬 수 있다. 실사와 그래픽의 효과적인 합성을 위하여 오버레이(overlay) 모드는 물론 알파키(alphakey)와 크로마키(chromakey)를 조합한 모드를 사용하였다. VIVA는 2002년 부산 아시안 게임에서 수영과 양궁 중계에 활용하였다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.49-50
• /
• 2011

Receiving sensitivity of the power gain by using Soret typed FZPL antenna should be worse when obliquely incident wave is illuminated on the FZPL. To solve this problem, elliptic Fresnel Zone Plate Lens antenna system should be introduced. Some numerical results computed by PO method are compared with Kirchhoff's approximation and measurement result.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.20 no.1
• /
• pp.1-6
• /
• 2021

In this study, we investigate the injection molding of f-theta lens, an important element of the laser scanning unit of laser printers and scanning systems. The f-theta lens is an aspherical plastic lens that must be molded with a precision of seconds. An injection molding method is often used for mass producing aspherical plastic lenses at a low cost. In the injection molding process, costs related to forming and injection are included. Therefore, in this study, to determine the shrinkage and deformation of injection molded f-theta lens, we predict the pressure and temperature distributions. Further, based on the analysis of the predictions, we maximize the design efficiency and verify the cost and development period reduction.

• Korean Journal of Optics and Photonics
• /
• v.14 no.4
• /
• pp.392-398
• /
• 2003

We present a novel concept of a phase-shifting diffraction-grating interferometer, which is intended for the optical testing of concave mirrors with high precision. The interferometer is configured with a single reflective diffraction grating, which performs multiple functions of beam splitting, beam recombination, and phase shifting. The reference and test wave fronts are generated by means of reflective diffraction at the focal plane of a microscope objective with large numerical aperture, which allows testing fast mirrors with low f-numbers. The fiber-optic confocal design is adopted for the microscope objective to focus a converging beam on the diffractive grating, which greatly reduces the alignment error between the focusing optics and the diffraction grating. Translating the grating provides phase shifting, which allows measurement of the figure errors of the test mirror to nanometer accuracy.

• Korean Journal of Optics and Photonics
• /
• v.22 no.5
• /
• pp.230-238
• /
• 2011

There are many types of interchangeable zoom lens in the digital single lens reflex camera and the compact digital still camera system in order to meet various specifications such as the field angle. Thus special cases for which the focus adjustment using only an auto-focus group is not available in the focal point correction (that is, the focus adjustment) of both wide and tele-zoom positions are sometimes generated. In order to make each BFL(back focal length, BFL) coincide at wide and tele-zoom positions with each designed BFL, focus adjustment processes must be performed at least in these two points within the zoom lens system. In this paper, we propose a method of focus adjustment by using the concept of focus sensitivity, and we calculate a limit on focus adjustment distance by means of statistical analysis.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.12
• /
• pp.125-131
• /
• 2008

In the past, precision optical glass lenses were produced through multiple processes such as grinding and polishing, but mass production of aspheric lenses requiring high accuracy and having complex profile was rather difficult. In such a background, the high-precision optical GMP processes were developed with an eye to mass production of precision optical glass parts by molding press. Generally because the forming stage in a GMP process is operated at high temperature above $570^{\circ}C$, thermal stresses and deformations are generated in the aspheric glass lens mold that is used in GMP process. Thermal stresses and deformations have negative influences on the quality of a glass lens and mold, especially the height of the deformed glass lens will be different from the height of designed glass lens. To prevent the problems of a glass lens mold and the glass lens, it is very important that the thermal stresses and deformations of a glass lens mold at high forming temperature are considered at the glass molds design step. In this study as a fundamental study to develop the molds used in an aspheric glass lens fabrication, a heat transfer and a thermal stress analysis were carried out for the case of one cavity glass lens mold used in progressive GMP process. Finally using analysis results, it was predicted the height of thermally deformed guide ring and calculated the height of the guide ring to be modified, $64.5{\mu}m$. This result was referred to design the glass lens molds for GMP process in production field.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.05a
• /
• pp.74-76
• /
• 2012

In order to design Transceiver/Receiver antenna with high gain in Ka band, Fresnel zone plate lend(FZPL) antenna is considered and analyzed. Physical optics is applied to demonstrate the FZPL. The FZPL is configured to 11 elements diffraction zones and drived at 20GHz. As a result, calculated received gain using PO method is 33.01dB.

• Proceeding of EDISON Challenge
• /
• 2015.03a
• /
• pp.563-568
• /
• 2015

풍력터변의 성능을 높이기 위한 방법으로 최근 해외에서는 쉬라우드를 장착하여 유입 유량을 증진시키는 형상에 대한 새로운 아이디어가 제안되고 시범적으로 적용되고 있다. 본 연구에서는 쉬라우드가 장착된 수평축 풍력터빈에 대해서 EDISON CFD를 이용하여 쉬라우드 내부로 유입되는 질량 유량의 변동을 몇 가지 형상에 대해 수치적으로 비교 분석하였다. 유동장은 비압축성 난류유동으로 가정하였으며, 수치 해석 결과로부터 쉬라우드 주변의 순환의 세기를 형상 변동에 따라 도출하였다. 쉬라우드 형상으로는 캠버를 갖는 goe 417 에어포일을 두 개의 받음각(5도, 10도)에 대해서 수치해석을 수행하였으며, 브림을 갖는 디퓨저 형상(Wind-lens)에 대해서도 유입 유량 변동과 순환 세기에 대해 수치해석을 수행하고 결과를 상호 비교하였다. 본 연구를 통해 쉬라우드가 발생시키는 순환에 의한 유입 유량 증가 현상을 파악할 수 있었으며, 이로써 풍력터빈의 출력을 증대시킬 수 있음을 확인하였다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.525-526
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.439-440
• /
• 2012