• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.4
• /
• pp.128-133
• /
• 2009

Focused-ion-beam (FIB) system is capable of both machining and measuring in nano-scale; hence nano-scale focusing quality is important. This paper investigates design parameters of two electrostatic lenses in order to achieve the best ion beam focusing performance. Commercial SIMION simulator is used to optimize the dimensions of the condenser and objective lenses and investigate the influence of assembly error on focusing quality The simulation results show that the beam focusing quality is not influenced by angle deviation within ${\pm}0.02\;deg$ and geometrical eccentricity within ${\pm}50$ micrometers.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.11a
• /
• pp.675-676
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.505-506
• /
• 2008

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2008.06a
• /
• pp.909-910
• /
• 2008

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2539-2544
• /
• 2014

As the production of electronic goods increases, poor products increase. Smart phone lens has much probability of breakage due to vibration happened at machine during the procedure of production. At this study model of smart phone, robot installed at guide rail is applied by various load according to its mass and investigated with vibration analysis. The analysis result in this study is thought to supply the material necessary at safe design and development on manufacturing machine system of smart phone lens by assembled automation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.1
• /
• pp.39-46
• /
• 2013

This study aims to develop a plastic aspheric lens for a 13-megapixel mobile phone camera by injection-compression molding. A mold for injection-compression molding experiments was fabricated with a movable upper plate and four springs. During cavity filling for an aspheric lens with a thickness ratio of 2, a weldline was formed under conventional injection molding, whereas no weldline was formed under injection-compression molding with a compression stroke of 0.3 mm. The flow patterns were in good agreement with the simulation results. The birefringence decreased as the compression stroke increased, and the birefringence produced by injection-compression molding was very low and more uniform compared with that produced by injection molding. In addition, the bulk birefringence of an assembly composed of four plastic lenses was significantly affected by the orientation of the lenses to be mounted.

• Transactions of the Society of Information Storage Systems
• /
• v.4 no.1
• /
• pp.19-22
• /
• 2008

For the assembly and evaluation of solid immersion lens (SIL) optical head which is the key component of SIL based near field recording (NFR) technology, we modify the Twyman-Green interferometer. Super-hemisphere SIL optical head for the surface recording is assembled and evaluated by the modified Twyman-Green interferometer. In order to verify the optical performance of the assembled SIL optical head, we compare the measured results of the SIL optical head with the simulation ones. Finally, we show the feasibility of applying the assembled SIL optical head to near field recording system by the experiment of the dynamic gap control based on test bed.

• Journal of the Microelectronics and Packaging Society
• /
• v.21 no.3
• /
• pp.37-41
• /
• 2014

In this work, we investigated the efficiency improvement of concave mirror based solar daylighting system that does not convert light to electricity. Total efficiency of the system is substantially affected by external environment and focusing position, alignment of reflectors, lenses. As a result of simulation, we obtained the max. efficiency in which depends on convex lens position.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.9
• /
• pp.42-47
• /
• 1998

We have fabricated electron-optical lens for micro E-beam system that can overcome the limitation of current E-beam lithography. Our electron-optical lens consists of multiple silicon electrodes which were fabricated by micromachining technology and assembled by anodic bonding. The assembled system was installed in UHV chamber to observe the emission characteristics of focused electrons by the electro-optical lens. We used STM(Scanning Tunneling Microscope) tip for electron source. By performing lithography with the focused electrons with PMMA(poly-methylmethacrylate) as E-beam resist. We could draw 0.13${\mu}{\textrm}{m}$ nano-scale lines.

• The Optical Journal
• /
• s.133
• /
• pp.53-60
• /
• 2011

광학세계에서는 일본 캐논의 연구개발부장을 지낸 말전철부(末田哲夫)씨가 집필한 <광학부품의 사용법과 유의점>이란 책 내용을 연재하고 있다. 본 내용은 일본의 월간 OPTRONICS에서 1982년부터 30회에 걸쳐 연재된 바 있고, 연재한 내용만 묶어 한 권의 책으로 나온 이후 지금까지 많은 광학인들이 애독하고 있는 핸드북이다. 월간 OPTRONICS는 1990년에 책 내용을 세부에 걸쳐 수정함과 동시에 렌즈에 대한 기초를 보다 충실히 하고 비구면 렌즈, Rod 렌즈, 홀로그램, 고체 촬상디바이스, 회절광간섭방식 엔코더 등을 새롭게 첨가하여 보다 알찬 내용으로 보강하여 증보개정판을 내놓았다. 국내에서는 (주)그린광학에서 본 자료를 입수하여 사내자료로 활용하고 있을만큼 시대와 장소를 초월하여 아직도 광학산업현장에서 유용한 자료로 읽혀지고 있다. 비록 일부 내용들은 우리 나라 산업현실과 다소 차이가 있는 부분도 있을 것이나 광학기술의 역사와 기반이 앞서있다고 생각되는 일본의 실질적인 기술관련 자료이기 때문에 국내 업체 관련분야에 종사하시는 분들에게 일독을 권해드리고 싶은 마음에 광학세계에서도 2009년 7월호부터 연재를 하게 되었다. 전체 내용을 살펴보면, 제1부에는 대표적인 광학부품에 대한 설명, 제2부에는 그것들을 사용한 광학시스템과 그것들에 관한 기본적인 사항의 해설, 제3부에는 광학부품을 수입하는 경우의 측정방법과 그것들을 시스템으로 조립하는 경우의 조정방법 예 등을 소개했다. 기술 내용은 응용범위가 넓다고 생각되는 구체적인 예를 기본으로 소개했다.