Journal of the Korea Academia-Industrial cooperation Society (한국산학기술학회논문지)

The Korea Academia-Industrial cooperation Society (한국산학기술학회)
권호 표지
DOI QR코드

DOI QR Code

The Analysis of Vibration on the Guide Rail Installed with Manufacturing System of the Smart Phone Lens

스마트폰 렌즈 생산시스템에 장착된 가이드 레일에 관한 진동해석

  • Kim, Young-Choon (Division of Mechanical & Automotive Engineering, Kongju National University) ;
  • Cho, Jae-Ung (Division of Mechanical & Automotive Engineering, Kongju National University) ;
  • Joung, Woon-Se (JNC-TECH Company)
  • Received : 2014.03.19
  • Accepted : 2014.05.08
  • Published : 2014.05.31
Download PDF
⟨ Previous Next ⟩

Abstract

As the production of electronic goods increases, poor products increase. Smart phone lens has much probability of breakage due to vibration happened at machine during the procedure of production. At this study model of smart phone, robot installed at guide rail is applied by various load according to its mass and investigated with vibration analysis. The analysis result in this study is thought to supply the material necessary at safe design and development on manufacturing machine system of smart phone lens by assembled automation.

전자제품의 생산량이 증가함에 따라 생산기계의 구조 때문에 불량품을 많아진다. 본 연구에서의 스마트폰 렌즈는 생산하는 과정에서 기계에서 발생하는 진동 때문에 깨지는 확률이 많다. 스마트폰 렌즈의 연구 모델에서는 가이드레일에 장착된 Robot의 질량에 따라서 Robot에 여러 가지 하중을 작용하여 진동해석을 하였다. 본 연구에서의 해석결과는 조립 자동화에 의한 스마트폰 렌즈의 생산기계 시스템에 대한 안전설계와 개발에 필요한 자료를 제공할 수 있을 것으로 사료된다.

Keywords

References

  1. J. U. Cho, K. S. Kim, D. S. Choi, S. H. Kim, S. O. Bang and C. K. Cho, "Development of Plastic Suspension System for Automotive Seat", Journal of KAIS, Vol. 12, No. 3, pp. 1091-1097, 2011. DOI: http://dx.doi.org/10.5762/KAIS.2011.12.3.1091
  2. S. N. Park, "Development Trend of Car Seat Technology", Journal of the Korea Society of Automotive Engineers, Vol. 31, No. 4, pp. 26-33, August, 2009.
  3. J. H. Kim, D. U. Park, J. H. Lee, M. K. Kim and W. S. Yoo, "Evaluation of Ride Comfort considering Seat Vibration", Journal of the Korea Society of Automotive Engineers, Vol. 1, No. 2, pp. 535-987, May, 2002.
  4. H. Y. Kim, J. M. Kim, J. G. Choi, K. T. Lee and D. J. Lee, "Structural Analysis for the Development of Round Recliner", Journal of the Korea Society of Automotive Engineers, Vol. 2, pp. 1361-1366, November, 2003
  5. J. F. Pywell, "Automotive Seat Design Affecting Comport and Safety", SAE 930108, pp. 142-151, 1933. DOI: http://dx.doi.org/10.4271/930108
  6. R, Nagpal and E. Y. Kuo, "A time-Domain Fatigue Life Prediction Method For Vehicle Body Structures, "SAE 960567, pp. 607-616, 1996. DOI: http://dx.doi.org/10.4271/960567
  7. H. Y. Lee, J. Y. Lim and H. T. Bom , "A Study on the Structural Analysis of Car Seat Frame", Annual Conference of KSAE, Vol. 2, pp. 170-176, June, 1997.
  8. J. U. Cho, K. S. Kim, D. S. Choi, S. H. Kim, S. O. Bang and C. K. Cho, "Development of plastic suspension system for automotive seat", Journal of KAIS, Vol. 12, No. 3, pp. 1091-1097, March, 2011. DOI: http://dx.doi.org/10.5762/KAIS.2011.12.3.1091