• Archives of design research
• /
• v.18 no.2 s.60
• /
• pp.165-172
• /
• 2005

Button layout of mobile phone depends on the manufacturer and is going to be characterized in it's own way. So, there is not a standard layout except for numeric part. It is due to the lack of study on physical user interface and methodology to develop a design guideline. This study focuses on suggesting a methodology for development of button layout for mobile phone in term of physical user interface. The methodology of this study starts from scenarios of mobile phone usage. Operational sequences of 4 scenarios for 5 models are gathered based on the user manual. Proximity of each buttons is calculated according to the operational sequence. One of 5 models is selected and benchmarked by evaluating operational path. Considerations and directions are implicated to develop new solution alternatives. After evaluation of them, one of alternatives is suggested as an optimized button layout for mobile phone. This study focuses on an attempt to suggest a methodology of UI development in the matter of physical user interface, and a simple and easy way to be adopted and used at product designer level, compared to existing UI methodology for the expert.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.5 no.3
• /
• pp.27-45
• /
• 2010

It is strongly believed that multicast will become one of the most promising services on internet for the next generation. Multicast service can be deployed either on network-layer or application-layer. IP multicast (network-layer multicast) is implemented by network nodes (i.e., routers) and avoids multiple copies of the same datagram on the same link. Despite the conceptual simplicity of IP multicast and its obvious benefits, it has not been widely deployed since there remain many unresolved issues. As an alternative to IP multicast, overlay multicast (application-layer multicast) implements the multicast functionality at end hosts rather than routers. This may require more overall bandwidth than IP multicast because duplicate packets travel the same physical links multiple times, but it provides an inexpensive, deployable method of providing point-to-multipoint group communication. In this paper we develop an efficient method applied greedy algorithm for solving two models of overlay multicast routing protocol that is aimed to construct MDST (Minimum Diameter Spanning Tree : minimum cost path from a source node to all its receivers) and MST (Minimum Spanning Tree : minimum total cost spanning all the members). We also simulate and analyze MDST and MST.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.4
• /
• pp.148-156
• /
• 2009

This paper presents a new image rejection algorithm based on the analysis of the distortion of a single-frequency continuous-wave (CW) signal due to the I/Q mismatch. Existing methods estimated the gain mismatch and phase mismatch on RF receivers and compensated them However, this paper shows that the circular trajectory of a single-frequency CW signal is distorted elliptic-type trajectory due to the I/Q mismatch. Utilizing the analysis, we propose a I/Q mismatch compensation method. It has two processing steps. In the first processing step, the generated signal is rotated to align the major axis of the elliptic-type trajectory diagram with the x-axis. In the second processing step, the Q-channel signal in the regenerated signal is scaled to align the regenerated signal with the transmitted single-frequency CW signal. Simulation results show that a receiver using the proposed image rejection algorithm can achieve an image rejection ratio of more than 70dB. And, simulation results show that the bit error rate performances of receivers using the proposed image rejection algorithm are almost the same as those of conventional coherent demodulators, even in fading channels.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.37 no.5
• /
• pp.1-9
• /
• 2000

In this paper, for the reverse link of a imperfect power controlled DS/CDMA cellular system when a mobile radio channel is a Rayleigh distributed multipath fading channel, A extended DS/CDMA blocking probability formula considering both shadowing and multipath fading is derived. Erlang capacity and equivalent channel number considering shadowing are analyzed and compared with those considering both shadowing and multipath fading, respectively. The DS/CDMA blocking probability is calculated based on the analysis method that obtains Erlang capacity and ICF(interference correction factor) using the median value of $E_{b(i)}$/ $I_{0}$ corresponding to each reverse link user Assuming that the blocking probability set 2%, it is observed that the Erlang capacity is 19.97 Erlang at the data rate $R_{b}$=9.6 kbps and 11.67 Erlang at the data rate $R_{b}$=14.4 kbps and then is less 16% and 19% than the Erlang capacity considering shadowing only, respectively. It is also shown that the effect of multipath fading must not be ignored and then exact Erlang capacity and equivalent channel numbers that the DS/CDMA cellular system can support are provided.d.d.d.

• Tuberculosis and Respiratory Diseases
• /
• v.62 no.1
• /
• pp.5-10
• /
• 2007

Background: Korean national guidelines for examining contacts with active pulmonary tuberculosis (TB) are a tuberculin skin test (TST) and chest radiographs. The treatment of a latent TB infection as performed only in those younger than six years of age who test positive for TST. Although there is a high incidence of active TB in young Korean soldiers, the current national guidelines for controlling contacts with active TB in soldiers are insufficient. This study highlights the problems with the Korean guidelines for controlling a TB outbreak in a small military unit. Material and Methods: In December of 2005, there was a tuberculosis outbreak in a military unit with a total of 464 soldiers in Kyung Gi province. The chest radiographs were taken of all the soldiers, and TST were carried out on 408 candidates. Results: In the first screening of the chest radiographs, two active TB patients were detected. By August of 2006, four additional cases were detected, making a total of six cases after the outbreak. All the patients showed active pulmonary TB or TB pleuritis. When the results of TST in the close contacts and non-close contacts were compared, there was a significant difference in the absolute size of the induration($9.70{\pm}7.50mm$ vs. $6.26{\pm}7.02mm$, p<0.001) as well as the ratio of patients showing an induration > 10mm (50.0% vs. 32.0%, p<0.001) and 15mm (33.2% vs. 20.9%, p= 0.005). Conclusion: Although the national guidelines for managing a TB outbreak in a military unit were followed, there were continuous instances of new active TB cases. This highlights the need for new guidelines to prevent the spread of TB.

• The Journal of the Korea Contents Association
• /
• v.8 no.10
• /
• pp.20-26
• /
• 2008

The quality of stream remaking is decided the load of a server and Jitter through the traffic of the transmission path between end to end. In order to improve these problems in this paper, I propose tree construction method of low-delay-level-multicast. In this case which the network congestion will be occurred by streaming quality, I also propose the technique which dynamically changes the transmission path. This technique first constructs the overlay structure for relaxing the overload of server. Secondly, in order to decrease Jitter of client, it makes upload bandwidth and low latency balanced. In the evaluation of the performance, this paper showed better enhancement of about $15%{\sim}24%$ than P2CAST[4] in the simulation about node average join count, average bandwidth, service request refusal ratio, RTT measurement of nodes, and node average join count by defect ratio.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.9A
• /
• pp.722-728
• /
• 2005

In this paper, the reverse-link performance of synchronous DS-CDMA cellular networks is investigated in Rician multipath fading environments. The system's performance is evaluated in terms of the achievable average bit error rate BER) and the user capacities of two different network layouts, namely those of a uniform grid of hexagonal multiple cells and a single isolated cell. In the multiple-cell scenario, the impact of the other cells' interference on the attainable capacity of the synchronous DS-CDMA uplink is investigated. Upon comparing both networks to a conventional asynchronous CDMA system, we demonstrate an achievable user capacity gain of $25\%$ to $56\%$ for synchronous uplink transmissions over that of the corresponding asynchronous transmission scenario at BER = $10^{-3}$.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.3
• /
• pp.190-198
• /
• 2013

In order to predict acoustic pressure distributions by exterior incident wave at Cylindrical Hydrophone Array (CHA) sensor's positions, acoustic pressure analysis is performed by using beam tracing method. Beam tracing method is well-known of reliable pressure analysis methods at high-frequency range. When an acoustic noise source is located at the center of rectangular room, acoustic pressure analysis is performed by using both beam tracing method and Power Flow Boundary Element Method (PFBEM). By comparing with results of beam tracing method and those of PFBEM, the accuracy of beam tracing method is verified. We develop the CHA pressure analysis program by verified beam tracing method. The developed software is composed of model input, sensor array creator, analysis option, solver and post-processor. We can choose a model option of 2D or 3D. The sensor array generator is connected to a sonar which is composed of center position, bottom, top and angle between sensors. We also can choose an analysis option such as analysis frequency, beam number, reflect number, etc. The solver module calculates the ray paths, acoustic pressure and result of generating beams. We apply the program to 2D and 3D CHA models, and their results are reliable.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.3
• /
• pp.430-435
• /
• 2022

In this paper, we consider the non-orthogonal multiple access (NOMA) technique in the heterogeneous network (HetNET) consisting of a single macro base station (BS) and multiple small BSs, where the perfect successive interference cancellation is assumed for the NOMA signals. In this paper, we propose a deep learning-based user association and power allocation scheme to maximize the data rate in the NOMA-based HetNET. In particular, the proposed scheme includes the deep neural network (DNN)-based user association process for load balancing and the DNN-based power allocation process for data-rate maximization. Through the simulation assuming path loss and Rayleigh fading channels between BSs and users, the performance of the proposed scheme is evaluated, and it is compared with the conventional maximum signal-to-interference-plus-noise ratio (Max-SINR) scheme. Through the performance comparison, we show that the proposed scheme provides better sum rate performance than the conventional Max-SINR scheme.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.7
• /
• pp.1040-1046
• /
• 2022

In this paper, we consider a system with massive user equipments (UEs) in a cell and assume path loss and Rayleigh fading channels between the base station (BS) and UEs. In addition, it is assumed that the system bandwidth consists of multiple identical frequency subchannels. Under such assumptions, we propose a channel state information (CSI) feedback scheme and a resource allocation scheme for non-orthogonal multiple access (NOMA) transmission in order to reduce the feedback overhead of CSI generated by massive UEs and to reduce the complexity of resource allocation. In particular, for the proposed schemes, we analyze the sum data rate achievable by massive UEs in a cell and the outage probability with which the UEs in a cell do not meet the target data rate. Through the simulation results, we show that the proposed schemes can provide the superior outage probability, although it degrades the average sum data rate.