• Laser Solutions
• /
• v.14 no.3
• /
• pp.7-11
• /
• 2011

As an active emission display using emissive polymer has had much attention recently, needs for a selective patterning of emissive layer for those displays have been increased abruptly. Therefore, the various laser sources in terms of its wavelength has been used for laser direct patterning. In this work, the feasibility of those processes is examined using numerical analysis and the experimental investigation. A sample has multi-layered structure, emissive polymer on aluminum which is deposited on a glass substrate. Key factors for optimizing the laser patterning of the emissive polymer are considered into the control of ablation products, large-sized particle, and the choice of the appropriate wavelength for minimizing the heat affected zone and the remnant layer.

• Laser Solutions
• /
• v.15 no.3
• /
• pp.1-6
• /
• 2012

The friction force of patterned needle in elastomer have been investigated to verify the application for bio and plastic industry. The micro pattern on the needle surface were prepared by 266 nm, 20 ns laser and 800 nm, 220 fs laser, which were able to generate the different surface roughness. The friction force was measured by the load cell of 10 N capacity. As the results, the friction force of no patterned needle is almost constant during the needle penetrates the silicone rubber sample. However, the needle having asperities shows the variation of the friction force. The higher the surface roughness is, the smaller the friction force is until the surface roughness is very high. In our experiment conditions, the reduction of the friction force by 20 % compared to no pattern needle was achieved with straight and $50{\mu}m$ discrete line generated by 266 nm, 20 ns laser.

• The Optical Journal
• /
• s.174
• /
• pp.47-53
• /
• 2019

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.63-63
• /
• 2010

나노 구조를 제작은 나노 기술을 기반으로 하는 electronics, optoelectronics, sensing, ultra display등의 여러 분야에서 이용되고 있다. 특히 나노 구조를 갖는 금속 패터닝의 경우 전자빔 리소 그래피 (electron beam lithography)나 레이저 패터닝(laser patterning)과 같은 방법들이 많이 사용되고 있다. 하지만 공정이 복잡하고 그로 인해 공정 비용이 많이 든다는 단점이 있었다. 나노 임프린트 리소그래피 기술은 master mold 표면의 나노 패턴을 가열, 가압 공정을 통해 기판 위의 고분자 레지스트 층으로 전사하는 기술이다. 이 기술은 간단한 공정을 통해 나노 패턴을 형성할 수 있는 기술이기 때용에 차세대 나노 패터닝 기술로써 각광받고 있다. 특히 이 기술은 레지스트 층과의 직접적인 접촉을 통해 나노 패턴을 형성하기 때문에 다양한 방법을 통해 기능성 나노 패턴을 직접적으로 형성할 수 있는 가능성을 지니고 있다. 본 연구는 novel meta1의 하나인 Ag 입자가 첨가된 ink solution를 master mold로부터 복제한 PDMS mold를 이용하여 다양한 구조의 나노 패턴을 만드는 방법에 대한 연구이다.

• Proceedings of the Korean Society of Laser Processing Conference
• /
• 2005.06a
• /
• pp.21-25
• /
• 2005

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.7
• /
• pp.28-28
• /
• 2000

• Journal of the Korea Convergence Society
• /
• v.11 no.7
• /
• pp.157-162
• /
• 2020

In recent years, laser induced graphene process have been intensively studied for eco-friendly electronic device such as flexible electronics or thin film based energy storage devices because of its simple and effective process. In order to increase the performance and efficiency of an electronic device using such a graphene patterned structure, it is essential to study an optimized laser patterning condition as small as possible linewidth while maintaining the graphene-specific 2-dimensional characteristics. In this study, we analyzed to find the optimal line pattern by using a Ti:sapphire femtosecond laser based photo-thermal reduction process. we tuned intensity and scanning speed of laser spot for generating effective graphene characteristic and minimum thermal effect. As a result, we demonstrated the reduced graphene pattern of 30㎛ in linewidth by using a focused laser beam of 18㎛ in diameter.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.5
• /
• pp.533-538
• /
• 2011

A plastic-compatible low-temperature metal deposition and patterning process is essential for the fabrication of flexible electronics because they are usually built on a heat-sensitive flexible substrate, for example plastic, fabric, paper, or metal foil. There is considerable interest in solution-processible metal nanoparticle ink deposition and patterning by selective laser sintering. It provides flexible electronics fabrication without the use of conventional photolithography or vacuum deposition techniques. We summarize our recent progress on the selective laser sintering of metals and metal oxide nanoparticles on a polymer substrate to realize flexible electronics such as flexible displays and flexible solar cells. Future research directions are also discussed.

• Laser Solutions
• /
• v.15 no.4
• /
• pp.12-15
• /
• 2012

On behalf of the existing semiconductor process, the electronic devices to low-cost mass production to mass print the way, the research for development of roll-to-roll printing process is actively underway. This study was performed in about the research on the manufacturing technology of the printing roll used in the printing process of electronic devices. The indirect laser imprinting technology was used to create printable roll, and after coating copper on the surface of steel and thereon after coating polymer, after removing the polymer on the surface of roll, the printable roll was made. The laser system and roll feeder system were constructed and control program was developed. We has found the optimal conditions to perform laser patterning experiments using a system developed and We can make the minimum line width of 18 ${\mu}m$.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.07a
• /
• pp.288-289
• /
• 2003

금속 박막 위의 알칸티올분자의 흡착에 의한 자기조립단분자막(SAMs)은 접착 방지, 마찰 저하 등의 기능을 가진 코팅층으로서의 응용과 분자 또는 생분자의 미세 구조물 형성을 위한 방법으로 널리 연구되어지고 있다. 이러한 연구 중에서 자기조림단분자막(SAMs)의 매우 얇은 두께(수 nm)의 특성을 활용하여 AFM tip Scratching Lithography 또는 알칸티올 포토패터닝(alkanethiol Photopatterning) 방법을 사용함으로써 microscale의 패턴을 형성하는 연구 결과가 많은 이들의 관심을 받아왔다. (중략)