• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.28 no.8
• /
• pp.619-627
• /
• 2017

MIMO(Multi-Input Multi-Output) radar is an emerging radar technology for its numerous advantages. However, in the electric warfare viewpoint, MIMO radar is a new developed radar technology for that existing parameter estimation cannot applied and a new radar parameter estimation based on the characteristics of MIMO radar is desired. In this paper, we propose a blind estimation scheme for the number of orthogonal waveforms of a uniform linear array(ULA) MIMO radar using minimum two electronic sensors.

• Proceedings of the Korean Information Science Society Conference
• /
• 2000.10c
• /
• pp.62-64
• /
• 2000

레이다 빔 스케쥴러는 레이타의 전체적인 운용과 제어를 담당하는 레이다 통제기의 핵심기능으로서 레이다의 운용시간 및 송신 전력 등 한정된 가용 자원을 효율적으로 관리하기 위한 최적화 기법이 매우 중요하다. 본 논문은 충남대에서 개발한 실시간 운용체제인 iRTOS를 기반으로 하여 방위각 방향은 기계적 회전을 하고 고각 방향은 위상을 가변하여 다수의 위협 표적을 실시간으로 탐지하고 추적하는 회전형 3차원 위상배열 레이다에 적용 가능한 레이다 빔 스케쥴러의 구현 알고리즘에 관한 내용이다. 제안된 레이다 빔 스케쥴러는 우선 순위를 갖는 핵심적인 스케쥴링 태스크와 이를 보조하기 위한 다수의 기능 태스크를 정의하고 생성하였으며 태스크간 데이터 교환을 위하여 인터럽트 처리, 시간 관리, 세마포어 및 메시지 큐 등을 적용하였다. 레이다 빔 스케쥴러의 성능을 검증하기 위하여 다수의 모의 표적을 발생시켜 빔 스케쥴러의 상태와 성능을 확인하였으며, 자체 개발한 실시간 운용체제인 iRTOS를 이용하여 3차원 레이다 빔 스케쥴러를 구현할 수 있음을 확인하였다.

• 한국항공운항학회:학술대회논문집
• /
• 2004.11a
• /
• pp.262-265
• /
• 2004

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.31 no.6
• /
• pp.485-492
• /
• 2019

The observation system has been developed to investigate the rip currents at Haeundae beach using X-band marine radar. X-band radar system can observe shape, size, and velocity of rip currents, which is difficult to obtain through field observation by conventional device. Algorithms which automatically detect locations, shapes, and magnitudes of rip currents were developed using time averaged X-band radar sea clutter images. X-band sea clutter images are transformed through 3D FFT into 2D wave number spectrum and frequency spectrum. Rip current velocities were estimated using differences in wave-number spectra and wave frequency spectra due to Doppler shift. The algorithm was verified by drift experiments. At Haeundae beach, the radar system exactly located the rip currents and found to be sustained for 1-2 days at fixed locations.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.5
• /
• pp.41-46
• /
• 2023

It is very important to meet the maximum detection range in a radar system. In order to meet the maximum detection Range, the sensitivity of the received signal of the radar system must be high. In addition, the dynamic range should be wide in the radar signal processing board. To meet these requirements, the signal processing board must be designed to be robust against external and internal noise. In particular, a design is required to minimize the effect of noise generated by various switching circuits inside the board on the received radar signal. In this paper, we derive the requirements of the signal processor board to meet the radar system performance and describe the design to meet the derived requirements. In addition, the EMC design to minimize the influence of noise input from the outside or generated from the inside is described. Confirm the secured performance through the test of the manufactured board.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2022.05a
• /
• pp.154-157
• /
• 2022

In the existing Tensorflow CNN environment, the object detection method is a method of performing object labeling and detection by Tensorflow itself. However, with the advent of YOLO, the efficiency of image object detection has increased. As a result, more deep layers can be built than existing neural networks, and the image object recognition rate can be increased. Therefore, in this paper, the detection ability and speed were compared and analyzed by designing an object detection system based on Darknet and YOLO and performing multi-layer construction and learning based on the existing convolutional neural network. For this reason, in this paper, a neural network methodology that efficiently uses Darknet's learning is presented.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.2
• /
• pp.96-103
• /
• 2003

A cavity-backed microstrip patch antenna for a monopulse radar system is designed and fabricated. Also, this antenna is shown to be suitable for the system by analyzing the measured results. Since the azimuthal beamwidth required by this system is quite broad compared to that of a usual microstrip antenna, the width of a microstrip patch is reduced considerably. The decrease of an antenna bandwidth due to the reduced patch width is compensated by increasing the effective substrate thickness. A detection range and a detection probability is calculated from the measured gain at a given angle, and this result shows that the fabricated antenna can be applied well to this monopulse radar system.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.05a
• /
• pp.605-608
• /
• 2009

It is necessary to estimate the Doppler spectrum for each range cell for the extraction of useful information from the return echoes in radar systems used for the remote sending purpose. However, The conventional spectrum estimation method, FFT(Fast Fourier Transform), called the Doppler filter bank, causes the frequency resolution problem if the dwell time is relatively short. This short acquisition time also spreads the side lobe levels of return echoes further, resulting in difficulties for the discrimination of weak target signals included in relatively strong target echoes. Therefore, in this paper, the efficient Doppler spectrum estimation methods are compared and investigated through the parameter spectrum estimation in the time domain to overcome these problems.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2006.06a
• /
• pp.113-116
• /
• 2006

Successful field test results for detection of buried undersea HVDC by magnetic vector measurements are discussed. Further study will be focused on practical utilization.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.442-444
• /
• 2004

본 연구는 핸드헬드 디바이스와 레고 블럭을 이용하여 공장의 무인화와 실시간문제 탐지, 실시간 원격제어를 위한 무선기반의 자동화 공장을 위한 시뮬레이터 구현을 목표로 하였다. 이를 위해, PDA와 무선랜 기술을 이용하여 무선 공장 자동화모델을 시뮬레이션 하였으며, 원거리에서도 탐지 및 제어를 할 수 있으며 또한 발생되는 문제점을 미리 파악하고, 보다 정확한 공정관리 및 제어를 위해 시뮬레이션 모델을 설계 및 구현하였다. 향후, 이는 임베디드 리눅스뿐 아니라 WinCE 를 탑재한 휴대폰에서도 공정제어, 모니터링 등의 제어가 가능할 것으로 예측된다.