• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.301-304
• /
• 2010

본 논문에서는 다수 캐비티 금형의 러너 내 불균일한 전단분포로 인해 발생되는 충전불균형에 따른 치수정밀도, 기계적 강도 등 물성의 차이가 발생되는 문제점을 해소하기 위해서 수지가 처음 분기되는 2차 러너의 구조에 변화를 주어 다수 캐비티 사출성형에서 충전균형을 위한 러너시스템을 제시하였다. 이 러너시스템은 전단률차이에 의한 즉, 온도가 불균일한 수지의 흐름을 혼합함으로써 수지의 흐름을 균일하게 하여 충전균형을 이루도록 하였다. PP수지를 대상으로 각 캐비티 간 균형충전에 대해 이 러너시스템이 효과가 있는지 검증하기 위해 CAE프로그램(Moldflow)을 이용한 유동해석을 통해 그 효과를 나타내 보았다.

• Proceedings of the KAIS Fall Conference
• /
• 2010.05b
• /
• pp.1245-1248
• /
• 2010

플라스틱은 가공이 용이하기 때문에 우리 생활에 널리 이용되고 있다. 과거에는 단순히 제품의 외장제로 이용되었지만 산업이 발달함에 따라 금속을 대체 할 정도로 사용 범위가 증가하고 있다. 또한 사용량이 증가함에 따라 제품의 생산량을 증가시키기 위해선 다수 캐비티의 금형 사용이 필수적으로 되었다. 다수 캐비티 사출성형에서 각 캐비티 간 제품의 품질 및 물성을 향상시키기 위해선 각 캐비티로 충전되는 수지가 균형을 이루어야 한다. 하지만 기하학적으로 균형을 갖추고 있는 러너를 설계하여도 실제 사출성형에서는 불균형 충전이 일어나게 된다. 이러한 불균형 충전은 미국의 Beaumont에 의해서 처음 규명된 뒤 충전불균형 현상을 해결하기 위해 많은 연구가 진행되었다. 본 논문에서는 다수 캐비티 사출성형에서 균형충전을 위한 러너시스템을 제안하였다. 이 러너시스템은 온도가 불균일한 수지의 흐름을 혼합함으로써 수지의 흐름을 균일하게 하여 균형충전을 이루도록 하였다. 또한 사출성형해석프로그램인 Moldflow를 이용한 유동해석을 통해 그 효과를 나타내 보았다.

• Journal of Practical Engineering Education
• /
• v.9 no.2
• /
• pp.119-124
• /
• 2017

In injection molding process, the runner system of the mold is a flow path for filling the cavity of the molded part during the advance of the screw by the force of the hydraulic cylinder, which involves the filling and packing process of the molten resin. Thus, the sprue, runner and gate greatly affect the appearance of the molded part, the physical properties of the resin, the dimensional accuracy and the molding cycle etc. Feed systems with incorrect runner and gate designs cause various molding defects, So it is important to maintain the optimum runner balance to prevent these defects. In order to improve the knowledge of practical mold technology, which is applied to the manufacturers of injection molds, a training model of the mold technology process is presented based on the technical guidance on the technical difficulties.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.115-115
• /
• 2004

최근에는 자동차용 범퍼(Bumper), 인판넬(In-panel), 도어판넬(Door panel), 도어가니쉬(Door Garnish) 등과 같은 대형 사출성형품을 성형하기 위한 금형설계에 핫 러너 시스템(Hot Runner System)에 밸브 게이트(Valve Gate)를 채용한 밸브 게이트 시스템을 많이 사용하고 있다 이 시스템을 사용함으로서 성형 싸이클타임의 단축, 수지 스크랩의 감소 등의 말은 장점이 있으나, 실제 성형작업 적용 시 밸브 게이트의 작동순서 및 개폐시간의 제어 등에 정확한 표준이 없어 시험 사출시 최적 성형조건의 셋팅이 많은 시간을 소모하고 있는 문제점이 있다.(중략)

• The Safety technology
• /
• no.183
• /
• pp.32-35
• /
• 2013

• Horticultural Science & Technology
• /
• v.28 no.4
• /
• pp.535-539
• /
• 2010

The formation and elongation of runners, growth of runner plants, and transplant propagation rates of 'Maehyang' strawberry were investigated at various photosynthetic photon flux (PPF) levels. Strawberry plants having $3.1{\pm}0.4$ leaves and $7.0{\pm}1.1mm$ of crown diameter were used as propagules and were cultured for 35 days in 9 transplant production modules using fluorescent lamps as artificial lighting sources. Applied PPF levels were $137.4{\pm}2.1$, $217.0{\pm}1.0$, and $274.7{\pm}8.4{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ as measured on the surfaces of empty shelves. The numbers of runners and runner plants per propagule were the greatest at $280{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPF. The runner plant propagation rate was 0.27 plant/day/propagule at $280{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, which was significantly greater than that of conventional propagation methods. Results indicate that high PPF levels promotes the formation of runners and runner plants of strawberry and that the rapid propagation method with high PPF levels can be feasible for production of vigorous transplants in a closed transplant production system.

• Journal of the Korean Society for Precision Engineering
• /
• v.25 no.10
• /
• pp.144-149
• /
• 2008

Configuration of filling imbalance which is originated from imbalanced share rate of melt on runner is changed by runner layout, runner shape, material property, injection pressure, injection speed, melt temperature and mold temperature. In this paper, we conducted a study of runner layout and shape that are main factors of filling imbalance. Other factors such as the sharp corner effect and the groove corner effect are recently released were also considered. The results of study are showed that filling rate of between inside and outside cavity was influenced on shape of runner. Especially, this study suggests a new runner system for filling balance by adapting the two effects of unary branch type runner at multi cavity mold and theoretical investigated flow in the sharp corner type runner.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2003.10a
• /
• pp.281-281
• /
• 2003

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.4
• /
• pp.1581-1588
• /
• 2011

In this study, flow characteristics in a multi-cavity injection molding process were investigated. One of main problems occurred in the multi-cavity molding is a flow imbalance among cavities since it affects physical properties and quality of products. Charge imbalance is caused by the uneven shear stress. Therefore, changes in viscosity affect the physical properties of resin and injection conditions differ in the filling imbalance phenomenon. Through, this study focus on experimental studies of flow imbalance for PC and PP resin occurring in a balanced delivery system. Experimental results were compared with CAE results. By experimental and CAE analysis, main cause for the flow imbalance is temperature distribution in cross section of runner. New runner system with a simple change of runner shape was suggested to avoid the flow imbalance. A series of simulation to confirm feasibility of Volume Runner's effects was conducted using injection molding CAE.

• Design & Manufacturing
• /
• v.6 no.1
• /
• pp.52-57
• /
• 2012

Aspect of filling imbalance that is originated from imbalanced share rate in runner is changed by material property, runner layout that are factors of changing viscosity and by injection pressure, injection speed, melt temperature and mold temperature that are injection conditions. In this paper, we made a study of runner system that is one of factor of filling imbalance and Sharp Conner Effect and Groove Corner Effect that are recently released. The study are showed that filling rate of between inside and outside cavity was influenced on shape of runner. Also, we suggested runner system for filling imbalance by adapting the two effects at multi cavity of unary branch type and theoretical investigated flow in the Shrap Conner runner type.