• Journal of Sensor Science and Technology
• /
• v.4 no.1
• /
• pp.3-8
• /
• 1995

n-ITO/p-PSL heterojunction photodetector have been fabricated on the Si wafer by using ITO(indium tin oxide) and PSL(porous silicon layer). They were anodized selectively by using silicon nitride and Ni-Cr/Au and were passivated by using ITO as well as being isolated by using mesa structure. With white light from 0 to 3000 Lux, the photocurrent varied linearly with incident light intensity. The reverse characteristics of fabricated devices were very stable up to a bias voltage of -40V and dark current density was about $40nA/mm^{2}$. When the device was exposed by Xe lamp whose wavelength range from 400nm to 1100nm, the maximum photo responsivity was about 0.6A/W between 600 and 700nm. Variation of the characteristics of fabricated devices after 5 weeks was negligible.

• Journal of the Korean Society of Fisheries and Ocean Technology
• /
• v.46 no.4
• /
• pp.503-508
• /
• 2010

Common LED (Light Emitting Diode) lamp has many advantages to compare with fluorescent lamp, long life and no pollution matter like the mercury. The LED lamp is a good light source especially for shipboard lighting because of its compact structure which prevents explosion and shock. Also, low maintenance cost is expected due to its longer life time in comparison with conventional lamps. The LED lamp, however, need some estimates that change of voltage and frequency, vibration, moisture on board to definite accommodation of the LED lamp to shipboard. The purpose of this study is to compare physical properties of a fluorescent lamp with one of the common LED lamp so as to analyze accommodation of common LED lamp on board. This study was carried out in two stages. First, temperature, humidity of illumination, voltage, electric current, frequency and electric power were measured by using experimental equipments. Second, a comparative analysis of consumption electric power, annual oil charge, annual CO2 emission and lamp life time, etc of the fluorescent lamp and common LED one was made. As a result of the study, the consumption electric power of fluorescent lamp was 50% higher than one of the common LED lamp. As a result of measuring life time, it was found that life time of common LED lamp was more about 3.5 fold than one of the fluorescent lamp. Considering these results, it's thought that common LED lamp is verified that energy saving is possible and using is possible as substitute for fluorescent lamp on board.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.12
• /
• pp.1701-1708
• /
• 2002

본 연구의 목적은 자외선 차단 가공 처리 및 자외선 조사처리에 의해 면직물의 역학적 특성 변화를 조사하고 가공제 처리조건에 따른 차이점을 분석하는 것이다. 시료로는 100% 면직물을, 자외선 흡수제로 2,2'-dihydroxy-4,4'-dimethoxy benzophenone을, 첨가제로 Triton X-100, polyethylene glycol 400, MgCl$_2$.6$H_2O$를 사용하였다. 자외선 흡수제 처리는 Atlas Launder-O-meter로 75$^{\circ}C$에서 60분간 흡진법으로 하였다. 미처리 시료 및 처리시료는 모두 xenon 램프에 80시간 동안 노출되었으며, 자외선 조사 전후 시료의 역학적 특성은 KES-F시스템을 사용하여 측정하였다. 본 연구의 결과는 다음과 같이 요약할 수 있다. 자외선 흡수제 처리는 처리 농도에 상관없이 면직물의 선형인장성(LT), 인장레질리언스(RT), 굽힘강성(B), 굽힘이력(2HB), 전단강성(G), 전단이력(2HG5), 표면마찰계수(MIU)등을 증가시켰으며 표면거칠기(SMD)는 감소시켰다. 압축특성은 처리농도의 영향을 받아서 고농도의 자외선 흡수제 처리는 압축특성을 감소시켰으며, 저농도의 처리는 압축특성을 증가시켰다. 자외 선 흡수제 처리는 처리농도에 상관없이 면직물의 fullness/softness를 유의하게 증가시키는 반면 stiffness, crispness및 anti-drape stiffness를 감소시켜서 가공포의 종합태(THV)는 가공 전에 비하여 저하하였다. 자외선 조사는 가공 전 면직물의 경우 B, 2HB, G, 2HG, 2HG5, LC를 감소시켰다. 자외선 조사는 처리농도와 상관없이 가공포의 WT, 굽힘특성 , 전단특성을 감소시켰으며, 저농도의 흡수제 처리포의 경우 SMD를 증가시켰으며, 고농도의 흡수제 처리포의 경우 SMD를 감소시켰다. 자외선 조사는 처리농도와 상관없이 가공포의fullness/softness, stiffness, anti-drape stiffness를 유의하게 감소시켜서 자외선 조사 전 보다 THV가 37% 저하하였고 미 가공포의 THV를 저하율보다는 저하가 낮았다. 자외선 흡수제 처리에 의해 면직물의 태는 가공 전보다 감소하지만, 자외선 흡수제 처리는 자외선 조사에 의한 태 감소율을 낮추는 데 유의 한 효과가 있다.

• Economic and Environmental Geology
• /
• v.29 no.3
• /
• pp.345-355
• /
• 1996

The effectiveness of various electrode configurations in horizontal mappings and 1-D inversions of vertical sounding data for delineating 2-D structures was studied. Apparent resistivity values of three point, dipole-dipole, Wenner, and Schlumberger mappings were simulated for such structures as vertical dyke, tabular prism, buried vertical fault, ramp and complex structure by finite difference method (FDM) and they were compared with each other. Also 2-D cross sections for three structures obtained by interpolation of 1-D inverted sounding data in terms of three layers were compared for Schlumberger and Wenner arrays. On these cross sections, horizontal and vertical resistivity interfaces of the 2-D structures are revealed relatively clearly. Apparent resistivity curves of Schlumberger mapping show vertical resistivity discontinuities very well. On the whole, Schlumberger array is superior to the other arrays in electric sounding as well as mapping. This study clearly indicates that interpretations of 2-D structures based on 1-D inversion are possible.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.1
• /
• pp.33-39
• /
• 2015

This paper describes test result of the Supersonic Wing Structure and the utility of thermal test equipment, which is possible to heat rapidly and continuously above $1,000^{\circ}C$, the durability and reliability of which are improved compared with the existing equipment. Through the test, we could predict the amount of strength reduction of the wing due to aerodynamic heating, caused by exposure of high temperature. Recently the aerodynamic heating temperature of the supersonic flying object is rapidly increased. It is possible to carry out the High Temperature Strength Test on the hypersonic speed flying object with the newly designed thermal test equipment. Because of that, we can upgrade the High Temperature Strength Structure Test technique and test reliability.

• Korean Chemical Engineering Research
• /
• v.46 no.6
• /
• pp.1063-1068
• /
• 2008

The photocatalytic degradation of methylene blue water solution was carried out by irradiating microwave and UV light simultaneously using $TiO_2$ photocatalyst balls prepared by Chemical Vapor Deposition method. A microwave-discharged electrodeless UV lamp was developed to use microwave and UV simultaneously for photocatalytic reactions. The results of photocatalytic degradation of methylene blue showed that the decomposition rate increased with the microwave intensity, the circulating fluid velocity and auxiliary oxidizing agents added. Especially, the rate constant of $H_2O_2$-added photocatalytic reaction increased about three times from $0.0061min^{-1}$ to $0.0197min^{-1}$ when microwave was additionally irradiated. This study demonstrates that the microwave irradiation can play a very important role in photocatalytic degradation using peroxides although it is not easy to quantitatively assess the effect of microwave on photocatalytic reactions from the experimental data of this study.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.4
• /
• pp.37-43
• /
• 2006

Surface roughness and hardness of the electroplated Sn were characterized with variations of electroplating current density and current mode. The Sn electroplated at $5{\sim}50mA/cm^{2}$ exhibited the surface roughness of $2.0{\sim}2.4{\mu}m$. The Sn electroplated with pulse current mode exhibited low surface roughness compared one processed with direct current mode. With surface annealing at $300^{\circ}C$ for 3 sec using halogen lamp, surface roughness of the Sn bump was substantially reduced to $1{\mu}m$. The Sn electroplated at $5{\sim}50mA/cm^{2}$ exhibited the hardness of 10 Hv. Low contact resistances of $33{\sim}17m{\Omega}$ were obtained for specimens flip-chip bonded with Sn bumps.

• Korean Journal of Optics and Photonics
• /
• v.31 no.4
• /
• pp.183-190
• /
• 2020

In this paper, the illuminating optics of asymmetric light distribution was studied, which allowed the light distribution to be uniform even for short-range irradiation on a wide illumination area. In the case of a light installed at a short distance, the light is not diffused enough because of the short irradiation distance. For this reason, it is difficult to satisfy uniformity of illumination. In addition, lighting design for asymmetric distribution is required because the lighting device is installed tilted, for visibility. Therefore, the design of lighting systems with asymmetric light distribution could achieve uniform illumination of the target surface even under short-distance irradiation. This was then applied to the license lamp, a lighting system featuring short light irradiation distance, to confirm that it satisfies the legal standards.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.08a
• /
• pp.324-325
• /
• 2011

최근에 고효율의 적색 형광체를 합성하여 형광 램프, 음극선관, X-선 검출기, 전계 발광 디스플레이에 응용하기 위하여 다양한 모체 결정과 활성체를 도핑하는 연구가 활발히 진행되고 있다. 본 연구에서는 $GdNbO_4$ 모체 결정에 $Eu^{3+}$ 이온 활성체를 주입하여 합성함으로써 새로운 적색 형광체의 발광 세기와 입자의 형상을 최적화 시키고자 한다. 형광체 분말 시료의 제조는 Eu의 함량을 0, 0.05, 0.10, 0.15, 0.20 mol로 변화시키면서 고상 반응법을 이용하여 합성하였다. 초기 물질 Gd2O3 (99.99%), $Nb_2O_5$ (99.99%), $Eu_2O_3$ (99.9%)를 화학 적량으로 측량하고 에탄올과 ZrO2 볼과 함께 플라스틱 병에 넣어 400 rpm의 속도로 24시간 볼밀 작업을 수행한 후에, 혼합된 분말의 볼을 걸러내고 60$^{\circ}C$에서 20시간 동안 건조하였다. 건조된 시료를 막자 사발에 넣고 잘게 갈아서 체로 걸러낸 다음에 세라믹 도가니에 넣고 전기로에서 분당 5$^{\circ}C$씩 승온하여 500$^{\circ}C$에서 10시간 동안 1차 하소한 후에, 계속 온도를 승온시켜 1,200$^{\circ}C$에서 3시간 동안 소결하여 합성하였다. XRD 회절 패턴의 경우에, $Eu^{3+}$의 함량에 관계없이 모든 세라믹은 JCPDS (22-1104)에 제시된 회절상과 일치하는 사방정계의 결정 구조를 가짐을 확인할 수 있었다. 주 피크는 28.4$^{\circ}$에서 최대값을 갖는 (121)면에서 발생하는 회절 신호이었다(Fig. 1). 적색 형광체 분말의 광학 및 표면 특성은 PL, PLE와 SEM으로 조사되었으며, 세라믹 분말의 형광 특성과 결정 구조, 표면 형상에 대한 자세한 논의가 제시될 것이다.

• Solar Energy
• /
• v.10 no.2
• /
• pp.69-76
• /
• 1990

Photoelectrochemical decomposition of water by the irradiation of light to the $TiO_2$ thin film soaked in water was observed. The $TiO_2$ thin film was coated on top of $SnO_2$ nesa glass by use of spray method and of dip-coating method. The spray technique of $SnO_2$ nesa film production and dip-coating technique of $TiO_2$ thin film preparation on top of the $SnO_2$ nesa film were discribed briefly. $TiO_2$ film appearance was observed by SEM and I-V characteristic curve were measured for the various thickness of $TiO_2$ film. The film Thickness $1.8{\mu}m$ showed the maximum photoelectric current. Xe-lamp was used as light source for the photoelectrochemical reaction of thin film $TiO_2$ in acidic water(pH=1)