• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.9
• /
• pp.1250-1256
• /
• 2018

Recently, wireless networks are becoming an important infrastructure for the critical large-scale applications such as cyber-physical systems and next generation industrial automations. However, the fundamental performance uncertainty of wireless networks may incur the serious instability problem of the overall systems. This paper proposes the proactive network optimizer to guarantee the application demands without any real-time link monitoring information of the networks. In particularly, the proposed proactive optimizer is the cross-layer approach to jointly optimize the routing path and traffic distribution in order to guarantee the performance demand within a maximum k number of link faults. Through the simulations, the proposed proactive network optimizer provides better robustness than the traditional existing reactive networks. Furthermore, the proactive network does not expose to the major weakness of the reactive networks such as the performance degradation due to the erroneous link monitoring information and the network reconfiguration cost.

• Journal of KIISE:Information Networking
• /
• v.41 no.4
• /
• pp.177-185
• /
• 2014

It has been occurred many times that wireless sensor networks (WSNs) had congested areas because all the sensing data collected by multiple sensor nodes are delivered to one sink node. Typically, in order to control congested areas, it used to reduce the traffic by increasing the sensing period or discarding packets. However, those schemes have a disadvantage that it loses the reliability when delivering sensing data. Moreover, there are no schemes considering case of having poor quality of links between nodes in practical terms. In this paper, we suggest a scheme not to reduce the traffic but to distribute the traffic by changing routing paths depends on the traffic and the quality of links. Also, it can be seen that the reliability of delivering of the sensing data is improved with the experiments improving collection rates and shortening end-to-end delay.

• Journal of Digital Convergence
• /
• v.13 no.7
• /
• pp.207-212
• /
• 2015

The sensor network that is component of the Internet of Things require a lot of research to select the best route to send information to the anchor node, to collect a number of environment and cost efficient for communication between the sensor life. On the sensor network in one of the components of IOT's environment, sensor nodes are an extension device with low power low capacity. For routing method for data transmission between the sensor nodes, the connection between the anchor and the node must be accurate with in adjacent areas relatively. Localization CA (Centroid Algorithm) is often used although an error frequently occurs. In this paper, we propose a range-free localization method between sensor nodes based on the Radical Line in order to solve this problem.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.10
• /
• pp.47-54
• /
• 2013

In this paper, the structural design of optical Internet is analyzed and by using UNI (User Network Interface) signaling protocol an optical transmission experiment was performed. The hierarchical structure of the basic optical Internet consists of the backbone network, the service network and the access network. The necessary functions for each layer were described as follows: Control structure of the optical transport layer, network operation and management structure, internetworking technology of sub networks, routing and signaling technology. By using UNI signaling protocol from OIF (Optical Internetworking Forum), the optical transmission in the proposed structure of the optical Internet network was experimented. By the traffic generation of LSP (Label Switched Path) data packets along the route-configuration was delivered to UNI. Finally, by showing the value of TCP (Transmission Control Protocol) packets the optical transmission was completely and successfully demonstrated.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.7
• /
• pp.103-110
• /
• 2014

Recent TSV based 3D Integrated Circuit (IC) technology needs more powerful thermal management techniques. However, because cooling cost and form factor are restricted, thermal management are emphasis on software based techniques. But in case of throttling thermal management which one of the most candidate technique, increasing bus occupation induce total performance decrease. To solve communication bottleneck issue in TSV based 3D SoC, we proposed adaptive throttling technique Experimental results show that the proposed method can improve throughput by about 72% compare with minimal path routing.

• The Journal of Korean Association of Computer Education
• /
• v.10 no.5
• /
• pp.81-88
• /
• 2007

To support the movement of a mobile network consisting of several mobile nodes, the IETF NEMO working group proposed NEMO basic support protocol using bi-directional tunneling between the home agent and the mobile router. Since NEMO basic support protocol is based on bi-directional tunneling, all communications to and from mobile nodes are suffer from inefficient routing all the cases. To solve the routing inefficiency problem, several proposals are proposed. However, those proposals results in new problems, such as binding update storm and changes in existing protocol. Especially, binding update storm problem may cause the delay in binding update, this subsequently causes the difficulty for a real time service and the handoff delay on the movement of mobile network. In this paper, we propose a new binding update scheme which reduces binding update latency and the handoff delay through the distribution of the transmission time of binding update messages. The performance of the proposed scheme is also evaluated to demonstrate its efficiency. Simulation results show that the proposed scheme can efficiently reduce the binding update latency.

• The KIPS Transactions:PartC
• /
• v.9C no.6
• /
• pp.903-910
• /
• 2002

As the edge router provides the facility that it is capable of interworking with various kinds of networks, the forwarding engine should have the flexibility processing the corresponding types of frames from such network interfaces. In order to support the flexibility, we design and implement a prototype of edge router with ATM and Ethernet interfaces based on the programmable Ethernet packet processor Our forwarding engine handles and forwards the frames from ATM interfaces by using loop-back functionality of Ethernet packet processor. The performance of our edge router is evaluated by experiments throughout its performance of forwarding engine and tested by interworking with another kinds of routers.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.510-513
• /
• 2006

Mobile Ad-hoc networks have recently attracted a lot of attention in the research community as well as in industry. Although the previous research mainly focused on various of Ad-hoc in routing we consider, in this paper, how to efficiently support applications such as variable Geocasting basd on Ad-hoc networks. The goal of a geocasting protocol is deliver data packets to a group of nodes that are located within a specified geocasting region. Previous research that support geocast service in mobilie computing based on Ad-hoc have the non-optimization problem of data delivery path, overhead by frequent reconstruction of the geocast tree, and service disruption problem. In this paper, we propose the mobility pattern based geocast technique using variable service range according to the mobility of destination node and resource reservation to solve this problem. The experimental results show that our proposed mechanism has improved performance than previous research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.2
• /
• pp.303-310
• /
• 2014

We show improved throughput scaling laws for an ultra-wide band (UWB) ad hoc network, in which n wireless nodes are randomly located. First, we consider the case where a modified hierarchical cooperation (HC) strategy is used. Then, in a dense network of unit area, our result indicates that the derived throughput scaling depends on the path-loss exponent ${\alpha}$ for certain operating regimes due to the power-limited characteristics. It also turns out that the HC protocol is dominant for 2 < ${\alpha}$ < 3 while using the nearest multihop (MH) routing leads to a higher throughput for ${\alpha}{\geq}3$. Second, the impact and benefits of infrastructure support are analyzed, where m base stations (BSs) are regularly placed in UWB networks. In this case, the derived throughput scaling depends on ${\alpha}$ due to the power-limited characteristics for all operating regimes. Furthermore, it is shown that the total throughput scales linearly with parameter m as m is larger than a certain level. Hence, the use of either HC or infrastructure is helpful in improving the throughput of UWB networks in some conditions.

• Journal of Korea Multimedia Society
• /
• v.3 no.2
• /
• pp.148-156
• /
• 2000

This paper proposed that an MPLS-based VPN using next-generation If switches and appropriate set of traffic engineering algorithms is the best way to implement QoS-capable IP VPNs. While ATM-based solution would not rely scalable the number of connections becomes too large, MPLS-based VPNs’ efficiency could be confirmed network delay time through performance evaluation. And we evaluated the performance about the If VPN based on proposed MPLS, at the result of evaluation. We figured out that delay increased more slowly in case of VPN based on MPLS comparing with the VPN based on ATM which has rapid delay increasement. Therefore we confirm that the VPN based on MPLS has high speed of packet processing and high degree of network efficiency through the performance evaluation.