• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2004.05b
• /
• pp.713-716
• /
• 2004

In this paper we challenge the user Authentication using Kerberos V5 authentication protocol in Ad-hoc network environment. Ad-hoc network is a collection of wireless mobile nodes without the support of a stationary infrastructure. and DSR routing protocol, which is one of famous mobile ad-hoc routing protocols, has the following network path problem. this paper is the security structure that defined in a mobile network and security and watches all kinds of password related technology related to the existing authentication system. It looks up weakness point on security with a problem on the design that uses Ad-hoc based structure and transmission hierarchical security back of a mobile network, and a server-client holds for user authentication of an application level all and all, and it provides one counterproposal.

• The KIPS Transactions:PartC
• /
• v.10C no.4
• /
• pp.463-470
• /
• 2003

Many types of switching fabrics have been proposed for use in ATM networks. Multistage Interconnection Networks (MINs) constitute a large class of ATM switching systems that are widely used in today´s internetworking. One of the most veil-known types of multistage networks is the banyan network. The banyan network is attractive for its simple routing scheme and low hardware complexity, but its throughput is very limited due to internal blocking and output contention. In this paper, we propose an input-buffered dual-banyan switch model with multiple switching fabric between switch input and output to avoid internal and Head-of Line blocking. By performance analysis and simulation, we show that our model has a lower ceil delay and 96% throughput which is much better than other banyan-type switch architecture.

• KIPS Transactions on Computer and Communication Systems
• /
• v.8 no.3
• /
• pp.73-78
• /
• 2019

Due to frequent topology changes in wireless networks, inter-node link disconnection and path re-establishment occur, causing problems such as overloading control messages in the network. In this paper, to solve the problems such as link disconnection and control message overload, we perform path setup in three steps of the neighbor node discovery process, the route discovery process, and the route management process in the wireless network environment. The link stability value is calculated using the information of the routing table. Then, when the zone master monitors the calculated link value and becomes less than the threshold value, it predicts the link disconnection and performs the path reset to the corresponding transmitting and receiving node. The proposed scheme shows a performance improvement over the existing OLSR protocol in terms of data throughput, average path setup time, and data throughput depending on the speed of the mobile node as the number of mobile nodes changes.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.4
• /
• pp.69-76
• /
• 2009

The construction of Internet IP-based Network is composed of router and switch models in a variety of companies. The construction by various models causes the complexity of the management and control as different types of CLI is used by different company to filter out abnormal traffics like worm, virus, and DDoS. To improve this situation, IETF is working on enacting XML based configuration standards from NETCONF working group, but currently few commands processing at the level of operation layer on NETCONF are only standardized and it's hard for unified control operation process between different make of system as different company has different XML command to filter out abnormal traffics. This thesis proposes ways to prevent abnormal attacks and increase efficiency of network by re-routing the abnormal traffics coming thru unified control for different make of systems into Sinkhole router and designing a control system to efficiently prevent various attacks after checking the possibility of including abnormal traffics from unified control operation.

• Korean Journal of Optics and Photonics
• /
• v.13 no.2
• /
• pp.146-150
• /
• 2002

1.55${\mu}{\textrm}{m}$ PnpN optical thyristor as a smart optical switch has potential applications in advanced optical communication systems. PnpP optical thyristors operating at 1.55${\mu}{\textrm}{m}$ are proposed and fabricated for the first time. In the optical thyristors, we employ InGaAs/InP multiple quantum well (MQW) for the active n- and p-layers. The thyristors show sufficiently nonlinear s-shape I-V characteristics and spontaneous emission. In the OFF-state, the device has a high-impedance up to switching voltage of 4.03(V). On the other hand, it has low-impedance and emits spontaneous light as a light-emitting diode in the ON-state voltage of 1.77(V), and switching voltage is changed under several light input conditions. It can be used as a header processor in optical asynchronous transfer mode (ATM), as a hard limiter in optical code division multiple access (CDMA) and as a wavelength converter in optical WDM systems.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.23 no.6
• /
• pp.558-564
• /
• 2013

Wireless sensor networks (WSNs) contain limited energy resources and are left in open environments. Since these sensor nodes are self-operated, attacks such as sinkhole attacks are possible as they can be compromised by an adversary. The sinkhole attack may cause to change initially constructed routing paths, and capture of significant information at the compromised node. A localized encryption and authentication protocol (LEAP) has been proposed to authenticate packets and node states by using four types of keys against the sinkhole attack. Even though this novel approach can securely transmits the packets to a base station, the packets are forwarded along the constructed paths without checking the next hop node states. In this paper, we propose the next hop node selection method to cater this problem. Our proposed method evaluates the next hop node considering three factors (i.e., remaining energy level, number of shared keys, and number of filtered false packets). When the suitability criterion for next hop node selection is satisfied against a fix threshold value, the packet is forwarded to the next hop node. We aim to enhance energy efficiency and a detour of attacked areas to be effectively selected Experimental results demonstrate validity of the proposed method with up to 6% energy saving against the sinkhole attack as compared to the LEAP.

• Journal of Korean Society of Transportation
• /
• v.22 no.3 s.74
• /
• pp.145-157
• /
• 2004

The cycle length design model of the Korean traffic responsive signal control systems is devised to vary a cycle length as a response to changes in traffic demand in real time by utilizing parameters specified by a system operator and such field information as degrees of saturation of through phases. Since no explicit guideline is provided to a system operator, the system tends to include ambiguity in terms of the system optimization. In addition, the cycle lengths produced by the existing model have yet been verified if they are comparable to the ones minimizing delay. This paper presents the studies conducted (1) to find shortcomings embedded in the existing model by comparing the cycle lengths produced by the model against the ones minimizing delay and (2) to propose a new direction to design a cycle length minimizing delay and excluding such operator oriented parameters. It was found from the study that the cycle lengths from the existing model fail to minimize delay and promote intersection operational conditions to be unsatisfied when traffic volume is low, due to the feature of the changed target operational volume-to-capacity ratio embedded in the model. The 64 different neural network based cycle length design models were developed based on simulation data surrogating field data. The CORSIM optimal cycle lengths minimizing delay were found through the COST software developed for the study. COST searches for the CORSIM optimal cycle length minimizing delay with a heuristic searching method, a hybrid genetic algorithm. Among 64 models, the best one producing cycle lengths close enough to the optimal was selected through statistical tests. It was found from the verification test that the best model designs a cycle length as similar pattern to the ones minimizing delay. The cycle lengths from the proposed model are comparable to the ones from TRANSYT-7F.

• KIPS Transactions on Computer and Communication Systems
• /
• v.6 no.1
• /
• pp.1-8
• /
• 2017

Communications for mobile sink groups such as rescue teams or platoons bring about a new challenging issue for handling mobility in wireless sensor networks. To do this, many studies have been proposed to support mobile sink groups. When closely looking at mobile sink groups, they can be divided into (multiple) small groups according to the property of applications. For example, a platoon can be divided into multiple squads to carry out its mission in the battle field. However, the previous studies cannot efficiently support the division of mobile sink groups because they do not address three challenging issues engendered by the mobile sink group division. The first issue is to select a leader sink for a new small mobile sink group. The efficient data delivery from a source to small mobile sink groups is the second issue. Last, the third issue is to share data between leader sinks of small mobile sink groups. Thus, this paper proposes a routing protocol to efficiently support the division of mobile sink groups by solving the three challenging issues. For the first issue, the proposed protocol selects a leader sink of a new small mobile sink group which provide a minimum summation of the distance between the new leader sink and the previous leader sink and the distance from the new leader sink to all of its member sinks. For the efficient data delivery from a source to small mobile sink groups in the second issue, the proposed protocol determines the path to minimize the data dissemination distance from source to small mobile sink group by calculating with the location information of both the source and the leader sinks. With regard to the third issue, the proposed protocol exploits member sinks located among leader sinks to provide efficient data sharing among leaders sinks by considering the location information of member sinks. Simulation results verified that the proposed protocol is superior to the previous protocol in terms of the energy consumption.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.265-267
• /
• 2002

인터넷에서 멀티미디어 응용들이 증가함에 따라 서비스 품질(QoS: Quality of Service)을 보장해 줄 수 있는 여러 가지 방안이 제안되어 왔는데, 일반적으로 이들 방안은 확장성과 종단간 QoS 보장 간에 상호 모순이 발생하는 경향을 가지고 있다. 본 논문에서는 이와 같은 상호 모순을 피할 수 있는 QoS 지원 방안으로서 DQSP(Dynamic QoS Support Protocol)를 제안한다. DQSP는 도메인 내에서의 자원 예약과 연결 수락 제어 메커니즘을 정의한다. DQSP는 링크 자원을 각 에지 라우터로부터의 트래픽 클래스별로 동적으로 할당하고 에지 라이투가 자신에게 할당된 링크 자원에 관한 정보를 유지하도록 한다. DQSP는 목적지로의 연결 수락 제어를 위한 QoS 신호 프로토콜이 필요 없이 에지 라우터에서 매 사용자 플로우별로 직접적으로 연결 수락 결정을 내리므로 확장성 문제 및 코어 라우터의 복잡한 기능 요구 사항 문제를 해결한다. 또한 UQSP는 에지 라우터가 트래픽 부하에 따라 자신에게 할당되어 있는 자원을 반납하거나 추가적인 자원을 제공받을 수 있도록 해 자원 오버 프로비져닝으로 인해 발생할 수 있는 비효율적인 자원 활용 문제를 해결한다. 또한 DQSP는 경로 재계산을 수행하여 라우팅을 조정해 나감으로써 효율적일 네트워크 자원 활용이 가능하다. 시뮬레이션을 통하여 DQSP와 기존의 자원 할당 및 공유 방식들을 비교한 결과 DQSP가 시그널링과 상태 정보 유지를 위한 오버헤드 면에서 기존의 종단간 QoS 보장을 제공하는 구조인 IntServ에서와 같은 확장성 문제를 발생시키지 않으면서도 효율적으로 네트워크 자원을 활용할 수 있음을 확인할 수 있었다.재 상용화 되어있는 Bellcore 의 S/KEY 시스템과의 비교를 수행하였다. 분석에서는 제품의 효율성뿐만 아니라 보안성을 중요하게 생각하였으며, 앞으로 보안 관련 소프트웨어 개발에 사용될 수 있는 도구들이 가이드 라인에 대한 정보를 제공한다.용할 수 있는지 세부 설계를 제시한다.다.으로서 hemicellulose구조가 polyuronic acid의 형태인 것으로 사료된다. 추출획분의 구성단당은 여러 곡물연구의 보고와 유사하게 glucose, arabinose, xylose 함량이 대체로 높게 나타났다. 점미가 수가용성분에서 goucose대비 용출함량이 고르게 나타나는 경향을 보였고 흑미는 알칼리가용분에서 glucose가 상당량(0.68%) 포함되고 있음을 보여주었고 arabinose(0.68%), xylose(0.05%)도 다른 종류에 비해서 다량 함유한 것으로 나타났다. 흑미는 총식이섬유 함량이 높고 pectic substances, hemicellulose, uronic acid 함량이 높아서 콜레스테롤 저하 등의 효과가 기대되며 고섬유식품으로서 조리 특성 연구가 필요한 것으로 사료된다.리하였다. 얻어진 소견(所見)은 다음과 같았다. 1. 모년령(母年齡), 임신회수(姙娠回數), 임신기간(姙娠其間), 출산시체중등(出産時體重等)의 제요인(諸要因)은 주산기사망(周産基死亡)에 대(對)하여 통계적(統計的)으로 유의(有意)한 영향을 미치고 있어 $25{\sim}29$세(歲)의 연령군에서, 2번째 임신과 2번째의 출산에서 그리고 만삭의 임신 기간에, 출산시체중(出産時體重) $3.50{\sim}3.99kg$사이의 아이에서 그 주산기사망률(周産基死亡率)이 각각

• KIPS Transactions on Computer and Communication Systems
• /
• v.2 no.6
• /
• pp.265-278
• /
• 2013

With the recent advancements in various wireless communication technologies, the importance of mobile multicasting is coming to the fore, in an effort to use network resources more efficiently. In the past, when various mobile IP-based multicast techniques were proposed, the focus was put on the costs needed for network delivery for providing multicast services, as well as on minimizing the multicast handover delay. For techniques using MIPv6 (Mobile IPv6), a host-based mobility management protocol, however, it is fundamentally difficult to resolve the problems of handover delay and tunnel convergence. To resolve these problems, a network-based mobility management protocol called PMIPv6 (Proxy Mobile IPv6) was standardized. Although performance is improved in PMIPv6 over MIPv6, it still suffers from the problems of handover delay and tunnel convergence. In this paper, to overcome these limitations, a technique called LFH (Low-cost and Fast Handoff) is proposed for fast and low-cost mobility management with multicasting support in PMIPv6 networks. To reduce the interactions between the complex multicast routing protocol and the multicast messages, a simplified proxy method called MLD (Multicast Listener Discovery) is implemented and modified. Furthermore, a TCR (Tunnel Combination and Reconstruction) algorithm was used in the multicast handover procedure within the LMA (Local Mobility Anchor) domain, as well as in the multicast handover procedure between domains, in order to overcome the problem of tunnel convergence. As a result, it was found that LFH has reduced multicast delay compared to other types of multicast techniques, and that it requires lower costs as well.