• 산업기술연구
• /
• 제17권
• /
• pp.111-118
• /
• 1997

This thesis is an experimental research of investigating behavior of single pile, subjected to the vertical compression loads, using the centrifuge facility located in the geotechnical engineering laboratory in Kangwon National University. Centrifugal model experiments of model pile were carried out changing diameter of model pile, relative density of sandy ground and the gravitational level applied in the centrifuge. Thus, their effects on the load-settlement behavior and the ultimate bearing capacity of pile were investigated. Experimental results obtained from centrifuge model tests were compared with the theoretical or semi-empirical equations to analyze values of ultimate bearing capacity of model pile. When we compare the ultimate bearing capacity of experimental results with the ultimate bearing capacity of theorical results, the experimental results appear more higher in the De Beer method and Meyerhof. Expecially, Terzaghi method is very same as the experimental results normally.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1051-1060
• /
• 2010

In this study, the pressuremeter test (PMT) and the standard penetration test (SPT) were performed on the lateral pile loading tests site to evaluate the coefficient of subgrade reaction, which is used for load-deformation behavior analysis of laterally loaded piles by elastic subgrade reaction method. As a result, widely used empirical formulas of the coefficient of subgrade reaction by N values of SPT is evaluated conservatively lateral behavior of piles. While the method of directly used PMT results and evaluation method of the coefficient of subgrade reaction considering deformation moduli of soil and a pile diameter that is able to estimate very similar to actual load-deformation behavior of laterally loaded piles in deformation range of 0.5%-1.0% of a pile diameter.

• 한국농촌건축학회논문집
• /
• 제8권1호
• /
• pp.111-120
• /
• 2006

Our ancestor has accumulated inimitable a building system from experience. and they finally invented Gu-dul that heat the stone as a hitting system. The purpose of this study is to investigate and to write down the on Excavation & Restoration of Traditional Gu-dul in Young-dong. It was found that Gu-dul was the most suited for natural condition. That is wind, direction, earth level. As the results of analyzing the built- technque of traditional Gu- dul : 1) The Gu-dul type is lined, scattered, and mixed. 2) The hight of bank is 25-30cm, 3) The depth of Gaejari is 30-45cm, and The slope of that is gentle. 4) The slope of Gorae(a floor hitter) is 5 - 8%. (from the middle to the edge and from the lower part to the upper part) Therefore, For the practical application of future houses, it will be needed to develop the reasonable hitting system, and suggest to set up Gu-dul for our health and saving energy.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2000년도 가을 학술발표회 논문집
• /
• pp.253-260
• /
• 2000

Pile foundations have been widely used in civil engineering construction for many years. Structures subjected to large lateral loads usually have pile foundations as shallow foundations cannot sometimes support the moments on these structure. The purpose of this paper is to propose the p - multiplier factor (P$\sub$M/) based on the characteristics of behavior of laterally loaded group pile in homogeneous sand. For this, a series of model tests are performed and the composite analytical method proposed by author is used to the propose P$\sub$M/. Based on the model test results of the large number of laterally loaded group piles, p - multiplier factors for homogeneous sand are proposed by back analysis under various condition of soil density, spacing-to-diameter ratio of pile, number of pile, and spacing-to-diameter of pile. P - multiplier approach provides a simple but sufficient tool for characterizing the shadowing group effects of laterally loaded group pile.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2002년도 추계 학술발표회 논문집
• /
• pp.106-113
• /
• 2002

In this study, a numerical analysis method for soil-pile interaction in frequency domain problem is presented. The total soil-pile interaction system is divided into two parts so called near field and far field. In the near field, beam elements are used for a pile and plain strain finite elements for soil. In the far field, dynamic fundamental solution for multi-layered half planes based on boundary element formulation is adopted for soil. These two fields are coupled using FE-BE coupling technique In order to verify the proposed soil-pile interaction analysis, the dynamic responses of pile on multi-layered half planes are simulated and the results are compared with the experimental results. Also, the dynamic response analyses of interface spring elements are performed. As a result, less spring stiffness makes the natural frequency decrease and the resonant amplitude increase.

• 산업기술연구
• /
• 제15권
• /
• pp.147-152
• /
• 1995

The purpose of this paper is to analyze the bearing capacity, settlement and pile action of pile groups in cohesionless soil, based on a wide range of model test in laboratory. Model test were conducted with changing the variables affecting the behavior of group pile; Number of pile, Diameters, Spacings between piles and Arrangement of piles. Effects of these variables on group efficiency were investigated by analyzing test results. Test results were also compared with the existing analytical method and data obtained in-situ tests.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 봄 학술발표회 논문집
• /
• pp.363-370
• /
• 2001

A computationally efficient algorithm to analyze a group pile behavior is proposed by consideration of both soil-pile and pile-cap interactions. Using toad transfer method the nonlinear characteristics of the soil-pile interaction for a single pile is modeled by piecewise linear soil springs (p-y, t-z, and q-z curves). Beam-column method, one of the most practical approaches, is used for numerical modeling of the soil-pile system. In addition to the group effect resulting from the soil-pile-soil interaction, for a more realistic analysis it is essential to consider the effect of pile-cap interaction including geometric configuration of the piles in a group and conectivity conditions between piles and the cap. This paper mainly focuses on the pile-cap interaction and the development of a rational numerical procedure of its incorporation with the beam-column method.

• 한국지반환경공학회 논문집
• /
• 제21권8호
• /
• pp.15-27
• /
• 2020

본 연구에서는 말뚝에 작용하는 부마찰과 관련된 원심모형실험 및 실규모 현장실험 등 기발표 자료에 대한 고등3차원 유한요소해석을 수행하였다. 이를 통해 기존연구에서는 충분히 고려되지 못했던 부마찰이 작용하는 말뚝의 거동 특성을 상세히 분석하였다. 즉 수치해석을 통해 기존연구에서는 고려하지 못했던 부마찰에 의한 말뚝의 침하와 군효과, 군말뚝에서 희생말뚝의 영향과 말뚝두부와 기초판 사이의 상호거동, 말뚝-인접지반의 경계면 요소(interface element)의 유무 및 시간 의존적인 부마찰의 발생특성 등 다양한 요소들을 분석할 수 있었다. 원심모형실험의 경우 중력가속도가 1g에서 특정한 값으로 증가하는 경우 흙의 자중 증가로 인해 말뚝에 비교적 큰 부마찰이 발생하는 것을 확인하였다. 군말뚝의 경우 희생말뚝 유무 및 말뚝두부와 기초판과의 연결여부에 따라 말뚝의 거동이 크게 영향을 받는 것으로 나타났다. 특히 부마찰은 압밀과 관련된 시간의존적 특성을 가지므로 압밀이 진행 중인 말뚝의 거동을 분석할 경우 압밀을 고려한 해석을 수행하는 것이 합리적인 것으로 분석되었다. 이러한 일련의 고찰을 통하여 기존연구의 한계를 적절하게 보완하면서 부마찰을 받는 말뚝의 거동을 명확히 분석할 수 있었다.

• 대한환경공학회지
• /
• 제35권12호
• /
• pp.978-981
• /
• 2013

일상생활과 실험실에서 널리 사용하는 대표적 용기를 선정하여 세제세척 및 헹굼 후 용기에 잔류하는 계면활성제의 양을 정량화하였다. 일반적 세제 사용량인 8 mL를 수세미에 묻혀 용기를 닦은 후 흐르는 물에 7초 및 15초간 헹궈주었다. 설거지가 끝난 용기에 증류수 100 mL를 붓고 흔들어 그릇에 남아 있는 계면활성제를 추출하여 분석하였다. 7초 헹굼과정을 거친 후 용기에 잔류하는 계면활성제 농도는 뚝배기 4.68 mg/L, 후라이팬 1.22 mg/L, 유리그릇 0.57 mg/L, 플라스틱 용기 0.25 mg/L 순으로 모든 용기에서 계면활성제가 검출되었다. 그러나 15초 헹굼과정을 거친 경우, 뚝배기에서만 계면활성제가 여전히 검출되었고 다른 용기에서는 검출되지 않았다. 실험결과 다공성매체로 이루어진 재질일수록 계면활성제의 잔류가 많은 것으로 나타났다. 세제로 식기를 세척할 경우 충분한 헹굼과정이 있어야 세제 섭취를 줄일 수 있을 것으로 판단된다. 특히 많은 이공계실험실에서 실험실 용기가 세제세척 후 충분히 헹궈지지 않는다면 잔류 계면활성제가 이후 실험 결과에 지대한 영향을 미칠 수 있다.

• 한국지반환경공학회 논문집
• /
• 제11권3호
• /
• pp.17-22
• /
• 2010

본 연구에서는 풍화토 지반에 설치된 수평하중을 받는 H-pile 무리말뚝의 하중분담특성 및 상호작용계수(p-multiplier)를 분석하였다. 말뚝의 배열($2{\times}3$, $3{\times}3$), 말뚝의 간격(2D, 4D, 6D), 그리고 지반밀도(상대밀도:40%, 80%)를 고려한 수평재하 실험을 실시한 결과 다음과 같은 결과를 얻을 수 있었다. 무리말뚝내 각각의 말뚝에 작용된 평균수평하중은 말뚝의 수가 감소할수록 평균수평저항력이 증가하는 것으로 나타났다. 말뚝간격과 지반밀도에 따라 단말뚝과 무리말뚝의 p-y곡선을 분석한 결과 말뚝간격이 2D에서 6D로 증가함에 따라 무리말뚝의 상호작용계수값이 느슨한 지반의 경우 0.85~0.94(앞열말뚝), 0.57~0.79(중간말뚝), 0.60~0.71(후열말뚝), 조밀한 지반의 경우 0.76~0.82(앞열말뚝), 0.58~0.73(중간말뚝), 0.53~0.70(후열말뚝)의 값을 각각 나타냈다. 이와같이 단말뚝과 무리말뚝간 상호작용계수는 말뚝간격이 증가할수록 그 값이 증가함을 알 수 있었으며, 또한 앞열의 무리말뚝이 중간 및 후열말뚝들보다 보다 큰 상호작용계수 값을 나타냈다.