• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.10
• /
• pp.2345-2350
• /
• 2014

In this paper, measurement methods for the characteristics of antennas for indoor digital TV (DTV), having 75-ohm port impedance, are introduced. Reference impedance of typical radio frequency (or microwave) systems and measurement equipments is 50 ohm. However, the reference impedance of antennas for indoor DTV is 75 ohm, and the characteristics of the antennas cannot be measured directly using the measurement equipments. Measurement methods, using test equipments with reference impedance of 50 ohm, for the characteristics(impedance, radiation patterns, and gain) of antennas designed to fit for 75 ohm port are introduced.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.05a
• /
• pp.87-88
• /
• 2016

In this paper, a digital terrestrial TV reception antenna which can be applied to the house and vehicle windows was designed and investigated. The proposed antenna was configured for a monopole antenna structure with $230mm{\times}430mm{\times}3mm$, and the antenna parameters are calculated by using the OpenFDTD simulator. The proposed antenna can be used to the receiver for domestic digital broadcast in UHF.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.73-74
• /
• 2015

In this paper, a digital terrestrial TV reception antenna which can be applied to the fade zone was designed and investigated. The proposed antenna was configured for a wire antenna structure with $16cm{\times}14cm$, and the antenna parameters are calculated by using the MoM method. The proposed antenna can be used to the receiver for domestic digital broadcast in UHF.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.3
• /
• pp.497-502
• /
• 2014

In this paper, a design method for a broadband planar dipole antenna for terrestrial digital television (DTV) reception is studied. The dipole is modified to half bow-tie type for size reduction. The balun between feeding microstrip line and coplanar strip (CPS) line is implemented with a rectangular patch inserted along the center of the CPS line. The proposed antenna is the structure of dual resonances, one is due to the dipole and the other is due to the CPS line attached by the balun. The effects of various geometrical parameters on the antenna performance are examined, and the antenna is designed for terrestrial DTV band (470-806 MHz). The prototype antenna is fabricated on an FR4 substrate with a size of $95mm{\times}178mm$, and tested experimentally to verify the results of this study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.9
• /
• pp.1996-2002
• /
• 2013

In this paper, a design method for a compact broadband planar monopole antenna fed by a coplanar waveguide (CPW) is studied. The proposed broadband monopole is optimized for terrestrial digital television (DTV) reception. In order to achieve broadband characteristics, the monopole and ground conductor are gradually tapered. By loading slit pairs on both monopole and ground plane, the proposed antenna is miniaturized. The monopole is fed by a CPW with 75-ohm characteristic impedance on an FR4 substrate and its size is $100mm{\times}200mm$. The optimized monopole antenna for DTV band (470-806 MHz) is fabricated on an FR4 substrate and tested experimentally to verify the results of this study.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2600-2606
• /
• 2014

In this paper, a design method for a planar dipole pair antenna for an operation in the frequency band of 470-806 MHz for terrestrial indoor digital TV (DTV) is studied. The proposed antenna is composed of two planar dipoles connected through conducting strips, and the antenna is fed by a microstrip line. By employing different lengths of dipoles, a broadband characteristics is obtained, and the antenna is size-reduced by bending both ends of the longer dipole. The effects of design parameters on the antenna performance are examined by simulation, and the parameters are adjusted for terrestrial DTV band use. A prototype of the antenna for indoor DTV reception is fabricated on an FR4 substrate with a size of $240mm{\times}139.5mm$ and tested experimentally. The experiment results show that the frequency band for a VSWR < 2 ranges 458-864 MHz(61.4%), and it corresponds fairly well with the simulated band of 448-868 MHz(63.8%).

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.05a
• /
• pp.45-46
• /
• 2014

In this paper, measurement methods for the characteristics of antennas for indoor digital TV (DTV), having 75-ohm port impedance, are introduced. Reference impedance of typical radio frequency (or microwave) systems and measurement equipments is 50 ohm. However, the reference impedance of antennas for indoor DTV is 75 ohm, and the characteristics of the antennas cannot be measured directly using the measurement equipments. Measurement methods, using test equipments with reference impedance of 50 ohm, for the characteristics(impedance, radiation patterns, and gains) of antennas designed to fit for 75 ohm port are introduced.

• Digital Contents
• /
• no.11 s.102
• /
• pp.70-73
• /
• 2001

최근 발행한 LG경제연구소 보고서에 의하면 올해 연말부터 시작될 디지털 위성 방송은 풍부한 채널, 선명한 화질 및 음향 다양한 부가 서비스를 제공할 것으로 보이며, 가전, 컨텐츠, 전자상거래 등 관련 비즈니스에도 상당한 파급효과를 몰로 올 전망이라고 설명했다. 위성, 지상파, 케이블 방송 등은 TV방송을 수신하는 방식에서 차이점이 있다. 위성방송은 방송국에서 전송한 방송신호가 위성을 통해 시청자에게 전달되며, 시청자는 접시 형태의 안테나를 TV에 연결함으로써 방송신호를 수신할수 있다. 반면 지상파 방송은 방송국에서 전송탑을 통해 전송한 지상파 방송신호를 옥외 혹은 옥내 안테나를 통해 수신하는 방식이며, 케이블 방송은 동축 케이블을 통해 방송신호를 수신한다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.159-160
• /
• 2014

In this paper, a design method for a broadband planar dipole antenna for the terrestrial digital television (DTV) reception is studied. The proposed antenna is an asymmetrical planar dipole consists of a rectangular patch with an embedded t-shaped slit, and the antenna shape is printed on a side of an FR4 substrate. The effects of geometrical parameters on the antenna performance are examined, and the parameters are adjusted to operate in the DTV frequency band of 470-806 MHz. The prototype antenna is fabricated on an FR4 substrate with a size of $260mm{\times}30mm$. The performance of the antenna is tested experimentally to verify the results of this study.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.24 no.10
• /
• pp.979-986
• /
• 2013

In this paper, a TVS diode which is commonly used as a ESD protector in wireless communication devices could cause antenna wireless sensitivity to decrease has been analyzed. When a smartphone doesn't have enough space to place many components, there would be its speaker near antenna area. In order to protect ESD coming through the speaker there also could be a TVS within antenna GND area. Digital audio signal which was sent to speaker and CDMA RF communication signal coupled from antenna was mixed by TVS. And this leakage current running through TVS resulted in decrease of antenna wireless sensitivity. The results of various experiments can be explained using circuit simulation. Following works will give us some insights that can reduce unwanted summation of digital and RF signal due to nonlinearity of ESD protectors.