• Journal of Korea Entertainment Industry Association
• /
• v.13 no.3
• /
• pp.193-202
• /
• 2019

This study focuses on what changes are required as to a curriculum of dance department in the university in the age of the 4th industrial revolution. By comparing and analyzing the curricula of dance department in the five universities in Seoul, five academic subjects as to curricula of dance department, which covers what to learn for dance education in the age of the 4th industrial revolution, are presented. First, dance integrative education, the integration of creativity and science education, can be referred to as a subject that stimulates ideas and creativity and raises artistic sensitivity based on STEAM. Second, the curriculum characterized by prediction of the future prospect through Big Data can be utilized well in dealing with dance performance, career path of dance-majoring people, and job creation by analyzing public opinion, evaluation, and feelings. Third, video education. Seeing the images as modern major media tends to occupy most of the expressive area of art, dance by dint of video enables existing dance work to be created as new form of art, expanding dance boundaries in academic and performing art viewpoint. Fourth, VR and AR are essential techniques in the era of smart media. Whether upcoming dance studies are in the form of performance or education or industry, for VR and AR to be digitally applied into every relevant field, keeping with the time, learning about VR and AR is indispensable. Last, the 4th industrial revolution and the curriculum of dance art are needed to foresee the changes in the 4th industrial revolution and to educate changes, development and seeking in dance curriculum.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.43 no.2
• /
• pp.231-238
• /
• 2023

Since there is a limit to the physically visible horizon that sensors for autonomous driving can perceive, complementary utilization of digital map data such as a Local Dynamic Map (LDM) along the probable route of an Autonomous Vehicle (AV) is proposed for safe and efficient driving. Although the amount of digital map data may be insignificant compared to the amount of information collected from the sensors of an AV, efficient management of map data is inevitable for the efficient information processing of AVs. The objective of this study is to analyze the efficiency of information use and information processing time of AV according to the expansion of the active section of LDM-based static road and traffic information. To carry out this objective, a microscopic simulator model, VISSIM and VISSIM COM, was employed, and an area of about 9 km × 13 km was selected in the Busan Metropolitan Area, which includes heterogeneous traffic flows (i.e., uninterrupted and interrupted flows) as well as various road geometries. In addition, the LDM information used in AVs refers to the real high-definition map (HDM) built on the basis of ISO 22726-1. As a result of the analysis, as the electronic horizon area increases, while short links are intensively recognized on interrupted urban roads and the sum of link lengths increases as well, the number of recognized links is relatively small on uninterrupted traffic road but the sum of link lengths is large due to a small number of long links. Therefore, this study showed that an efficient range of electronic horizon for HDM data collection, processing, and management are set as 600 m on interrupted urban roads considering the 12 links corresponding to three downstream intersections and 700 m on uninterrupted traffic road associated with the 10 km sum of link lengths, respectively.

• Journal of IKEEE
• /
• v.27 no.1
• /
• pp.122-126
• /
• 2023

In this paper, a control system for a complex microbial incubator was proposed. The proposed control system consists of a control unit, a communication unit, a power supply unit, and a control system of the complex microbial incubator. The controller of the complex microbial incubator is designed and manufactured to convert analog signals and digital signals, and control signals of sensors such as displays using LCD panels, water level sensors, temperature sensors, and pH concentration sensors. The water level sensor used is designed and manufactured to enable accurate water level measurement by using the IR laser method with excellent linearity in order to solve the problem that existing water level sensors are difficult to measure due to foreign substances such as bubbles. The temperature sensor is designed and used so that it has high accuracy and no cumulative resistance error by measuring using the thermal resistance principle. The communication unit consists of two LAN ports and one RS-232 port, and is designed and manufactured to transmit signals such as LCD panel, PCT panel, and load cell controller used in the complex microbial incubator to the control unit. The power supply unit is designed and manufactured to supply power by configuring it with three voltage supply terminals such as 24V, 12V and 5V so that the control unit and communication unit can operate smoothly. The control system of the complex microbial incubator uses PLC to control sensor values such as pH concentration sensor, temperature sensor, and water level sensor, and the operation of circulation pump, circulation valve, rotary pump, and inverter load cell used for cultivation. In order to evaluate the performance of the control system of the proposed complex microbial incubator, the result of the experiment conducted by the accredited certification body showed that the range of water level measurement sensitivity was -0.41mm~1.59mm, and the range of change in water temperature was ±0.41℃, which is currently commercially available. It was confirmed that the product operates with better performance than the performance of the products. Therefore, the effectiveness of the control system of the complex microbial incubator proposed in this paper was demonstrated.

• Korea Science and Art Forum
• /
• v.31
• /
• pp.21-32
• /
• 2017

Local festivals form the regional cultures and atmosphere of communication; they increase the demand of domestic tourism businesses and thus, have an important role in ripple effects (e.g. regional image improvement, tourist influx, job creation, regional contents development, and local product sales) and economic revitalization. IoT (Internet of Thing) technologies have been developed especially, beacon-one of the IoT services has been applied as plenty of types and forms both domestically and internationally. However, notwithstanding expansion of current digital mobile technologies, it still remains as difficult for the individual to track the information about all the local festivals and to fulfill the tourists' needs of enjoying festivals given the weak strategic approaches and advertisement activities. Furthermore, current festival-related mobile applications don't function well as delivering information and have numerous contents issues (e.g. ways of information delivery within the festival places, independent application usage for each festival, one time usage due to one time event). This research, based on the background mentioned above, aims to develop the local festival mobile application and data analysis system applying beacon technology. First of all, three algorithms were developed, namely, 'festival crowding algorithm', 'visitor stats algorithm', and 'customized information algorithm', and then beta test was followed with the developed application and data analysis system. As a result, they could form the database of visitors' types and behaviors, and provide functions and services, such as personalized information, waiting time for festival contents, and 'hot place' function. Besides, in Google Play store, they also got the titles given with more than 13,000 downloads within first three months and as the most exposed application related with festivals; and, thus, got credited with their marketability and excellence. This research follows this order: chapter 2 shows the literature review of local festival related with technology development, beacon service, and festival application. In Chapter 3, design plans and conditions are described of developing local festival mobile application and data analysis system with beacon. Chapter 4 evaluates the results of the beta performance test to verify applicability of the developed application and data analysis system, and lastly, chapter 5 explains the conclusion and suggests the future research.

• Informatization Policy
• /
• v.30 no.2
• /
• pp.22-45
• /
• 2023

In research on the use of AI-based voice assistant services, problems related to the user's trust and privacy protection arising from the experience of service use are constantly being raised. The purpose of this study was to investigate empirically the effects of individual trust in AI and online privacy concerns on the continued use of AI-based voice assistants, specifically the impact of their interaction. In this study, question items were constructed based on previous studies, with an online survey conducted among 405 respondents. The effect of the user's trust in AI and privacy concerns on the adoption and continuous use intention of AI-based voice assistant services was analyzed using the Heckman selection model. As the main findings of the study, first, AI-based voice assistant service usage behavior was positively influenced by factors that promote technology acceptance, such as perceived usefulness, perceived ease of use, and social influence. Second, trust in AI had no statistically significant effect on AI-based voice assistant service usage behavior but had a positive effect on continuous use intention. Third, the privacy concern level was confirmed to have the effect of suppressing continuous use intention through interaction with trust in AI. These research results suggest the need to strengthen user experience through user opinion collection and action to improve trust in technology and alleviate users' concerns about privacy as governance for realizing digital government. When introducing artificial intelligence-based policy services, it is necessary to disclose transparently the scope of application of artificial intelligence technology through a public deliberation process, and the development of a system that can track and evaluate privacy issues ex-post and an algorithm that considers privacy protection is required.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.25 no.4
• /
• pp.359-367
• /
• 2023

Grapes are one of the most important fruit trees both domestically and globally. Recently, changes in plant phenology and frequent low temperatures due to climate change are increasing the possibility of damage to grape shoots in spring, which is a serious threat to grape production. This study was conducted to investigated the severity of shoots damage and the change of free sugar content in the plant organs by phenological stage, especially, from germination to leafing period. Furthermore, in order to compare the cold hardiness among grape varieties including 'Campbell Early', 'Kyoho' and 'Shine Muscat' widely grown in Korea, lethal temperature (LT₅₀) and free sugar content by grape variety were analyzed. Shoot damage by low temperatures continued to increase as the phenological stage progressed gradually, from the bud burst to the fourth leafing stage. On the other hand, the free sugar content of each organ except leaves continued to decrease, showing pattern to similar to cold hardiness. This indicates a close relationship between free sugar content and cold hardiness. In terms of cold hardiness comparison among grape varieties, 'Shine Muscat' showed the highest cold resistance in the leafing stage with the lowest LT₅₀ and the highest total free sugar content. Next was 'Kyoho' and 'Campbell Early'. There are clear differences in cold hardiness depending on the variety. However, it is not the same at all growth stage. It may change according to phenological stage and influenced by free sugar content at that time.

• Information Systems Review
• /
• v.25 no.2
• /
• pp.145-162
• /
• 2023

Asset management is a complex and difficult field that requires insight into numerous variables and even human psychology. Thus, it has traditionally been the domain of professionals, and these services have been expensive to obtain. Changes are taking place in these markets, and the driving force is the digital revolution, so-called the fourth industrial revolution. Among them, the Robo-Advisor service using artificial intelligence technology is the highlight. The reason is that it is possible to popularize investment advisory services with convenient accessibility and low cost. This study aims to clarify what factors are critically important when selecting robo-advisors for service users and providers in Korea, and what perception differences exist in the selection factors between user and provider groups. The framework of the study was based on the marketing mix 4C model, and the design and analysis of the model used Delphi survey and AHP. Through the study design, 4 main criteria and 15 sub-criteria were derived, and the findings of the study are as follows. First, the importance of the four main criteria was in the order of customer needs > customer convenience > customer cost > customer communication for both groups. Second, looking at the 15 sub-criteria, it was found that investment purpose coverage, investment propensity coverage, fee level and accessibility factors were the most important. Third, when comparing between groups, the user group found that the fee level and accessibility factors were the most important, and the provider group recognized the investment purpose coverage and investment propensity coverage factors as important. This study derived useful implications in practice. First, when designing for the spread of the robo-advisor service, the basis for constructing a user-oriented system was prepared by considering the priority of importance according to the weight difference between the four main criteria and the 15 sub-criteria. In addition, the difference in priority of each sub-criteria shown in the group comparison and the cause of the sub-criteria with large weight differences were identified. In addition, it was suggested that it is very important to form a consensus to resolve the difference in perception of factors between those in charge of strategy and marketing and system development within the provider group. Academically, it is meaningful in that it is an early study that presented various perspectives and perspectives by deriving a number of robo-advisor selection factors. Through the findings of this study, it is expected that a successful user-oriented robo-advisor system can be built and spread in Korea to help users.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.68 no.4
• /
• pp.304-312
• /
• 2023

Plant breeding is a time-consuming process, mainly due to the limited annual generational advancement. A speed breeding system, using LED light sources, has been applied to accelerate generational progression in various crops. However, detailed protocols applicable to soybeans are still insufficient. In this study, we report the optimized protocols for a speed breeding system comprising 12 soybean varieties with various maturity ecotypes. We investigated the effects of two light qualities (RGB ratio), three levels of light intensity (PPFD), and two soil conditions on the flowering time and development of soybeans. Our results showed that an increase in the red wavelength of the light spectrum led to a delay in flowering time. Furthermore, as light intensity increased, flowering time, average internode length, and plant height decreased, while the number of nodes, branches, and pods increased. When compared to agronomic soil, horticultural soil resulted in an increase of more than 50% in the number of nodes, branches, and pods. Consequently, the optimal conditions were determined as follows: a 10-hour short-day photoperiod, an equal RGB ratio (1:1:1), light intensity exceeding 1,300 PPFD, and the use of horticultural soil. Under these conditions, the average flowering time was found to be 27.3±2.48 days, with an average seed yield of 7.9±2.67. Thus, the speed breeding systems reduced the flowering time by more than 40 days, compared to the average flowering time of Korean soybean resources (approximately 70 days). By using a controlled growth chamber that is unaffected by external environmental conditions, up to 6 generations can be achieved per year. The use of LED illumination and streamlined facilities further contributes to cost savings. This study highlights the substantial potential of integrating modern crop breeding techniques, such as digital breeding and genetic editing, with generational shortening systems to accelerate crop improvement.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.2
• /
• pp.95-103
• /
• 2024

Purpose. With the advancement of digital technology, 3D printing is being utilized in the fabrication of denture base. Nevertheless, increasing microbial adhesion to the surface of denture base has been reported as the disadvantage of 3D-printed denture base. The purpose of this study is to investigate the antifungal properties and flexural strength of 3D-printed denture base resin according to the different contents of titanium dioxide nanoparticles. Materials and methods. Titanium dioxide nanoparticles were mixed with the 3D printing resin at the ratios of 0.5, 1, 1.5, and 2 wt%. Twenty specimens per each group were printed in the form of cylindrical shape (diameter: 20 mm, height: 3 mm) to evaluate antifungal properties. Ten specimens from each group underwent polishing using autogrinder, while the remaining ten specimens did not. Candida albicans in hyphae form was inoculated onto each specimen, optical density and colony-forming unit were analyzed. The surface of the specimen was observed using scanning electron microscopy. To evaluate the flexural strength, twenty specimens per each group were 3D printed in the form of rectangular prism shape (length: 64 mm, height: 10 mm, width: 3 mm) and three-point bending tests were conducted using universal testing machine according to ISO 20795-1. Results. Colony-forming unit of C.albicans and optical density of culture medium showed no difference between non-polished groups, but decreased in the polished groups at concentration of 1, 1.5, 2 wt% titanium dioxide nanoparticles. Flexural strength increased with titanium dioxide nanoparticle at concentration of 0.5, 1, 1.5 wt%, but decreased at 2 wt% compared to 1.5 wt%. Conclusion. When 1.5 wt% of titanium dioxide nanoparticles were added to the 3D-printed denture base resin with polishing, antifungal properties were increased.

• Korean Journal of Heritage: History & Science
• /
• v.57 no.2
• /
• pp.144-166
• /
• 2024

The Cultural Heritage Committee is an important organization that has been deliberating on important matters related to the preservation of cultural properties in the Republic of Korea for more than 60 years since 1962. The Cultural Heritage Preservation Committee was active in 1961, which was a short period of about a year, but the minutes prepared at the time confirmed that it had the following meanings. First of all, legally, it was meaningful in that the concept of cultural property or intangible cultural property was used for the first time in Korea in laws and regulations on the term of office of professional members. These matters became the basis for the operation of the current Cultural Heritage Protection Act and the Cultural Heritage Committee. The following confirms that, unlike previously known activities, they were active despite political upheaval at the time. In spite of rapid regime change at the time, the committee had no change in its members, and the meetings continued without interruption. At that time, there was an exclusive relationship between different groups in relation to the preservation of cultural heritage, and this relationship was confirmed by the minutes that disappeared with the establishment of the Cultural Heritage Management Bureau, which integrated these groups. Finally, the form of the minutes prepared then shows the form of documentation at the time, where it is confirmed that the traditional documentation format is changing into a new form. It can be good research material in terms of modern and contemporary bibliography. As discussed earlier, the Cultural Heritage Conservation Committee of 1961 has historical significance in terms of legal and actual activities. The reason why the committee's activities were low valued is presumed to be that the minutes and related documents prepared at the time were not organized well due to the lack of a related administrative system. The minutes of the Cultural Heritage Conservation Committee record various facts about cultural heritage policies and decisions at that time. Therefore, analysis and research on these contents can reveal more facts about the cultural heritage policies and perceptions of that time.