• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.1
• /
• pp.43-50
• /
• 2003

Today, the demand of image acquisition systems grows as the multimedia applications go on increasing greatly. Among the systems, film scanner is one of the systems, which can acquire high quality and high resolution images. However due to the nonlinear characteristic of the light source and sensor, colors of the original film image do not correspond to the colors of the scanned image. Therefore color correction mr the scanned digital image is essential in the film scanner. In this paper, polynomial regression method is applied for the color correction to CIE $L^{*}$ $a^{*}$ $b^{*}$ color model data converted from RGB color model data. A1so a film scanner hardware with 12 bit color resolution for each R, G, B and 2400 dpi was implemented by using TMS320C32 DSP chip and high resolution line sensor. An experimental result shows that the average color difference ($\Delta$ $E^{*}$$_{ab}$ ) is reduced from13.48 to 8.46.6.6.6.6.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.36 no.3
• /
• pp.196-202
• /
• 2020

Recently three-dimensional (3D) printed complete dentures are becoming more widely recognized as one of the treatment options for the edentulous patients. Korean National Healthcare, however, has not yet approved the application of the 3D printed dentures, and in the cases where the dentures should be refabricated, the conventional fabrication process needs to be entirely repeated. However, during the conventional process, the digital scan data of some key steps could be easily obtained. In this clinical case, using these data, a new pair of 3D printed dentures that improved the limitations of the first conventional dentures were successfully fabricated.

• Journal of Digital Convergence
• /
• v.20 no.3
• /
• pp.75-83
• /
• 2022

Korea, which has the highest pedestrian fatality rate among OECD countries, is making efforts to improve the safe walking environment by enacting laws focusing on pedestrian. Spatial clustering was conducted with scan statistics after examining the social network data related to traffic accidents for children and seniors. The word cloud was used to examine people's recognition Campaigns for children and literature survey for seniors were in main concern. Naedang and Yongsan are the regions with the highest relative risk of weak pedestrian for children and seniors. On the contrary, Bongmu and Beomeo are the lowest relative risk region. Naedang-dong and Yongsan-dong of Daegu Metropolitan City were identified as vulnerable areas for pedestrian safety due to the high risk of pedestrian accidents for children and the elderly. This means that the scan statistics are effective in searching for traffic accident risk areas.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.4
• /
• pp.357-365
• /
• 2024

By utilizing 3D image data from oral and facial scans, virtual patients can be created, allowing clinicians to accurately assess the occlusal plane and the aesthetic position and form of anterior teeth in relation to facial scan data. This integration enhances the predictability of aesthetic prosthetic treatments, reduces the potential for occlusal interferences and adjustments, and facilitates effective communication with patients during the diagnostic process. In this case report, a patient with skeletal Class III malocclusion had both oral and facial scans to generate a virtual patient during the diagnostic phase. Based on this virtual model, prostheses were designed and fabricated, resulting in an efficient and clinically satisfactory outcome both aesthetically and functionally.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.38 no.4
• /
• pp.249-256
• /
• 2022

The implant prosthesis of anterior maxilla requires careful consideration in planning. In order to satisfy both esthetic and functional needs of a patient, fusion of intra-oral scan in Cone-beam computed tomography (CBCT) and facial scan can be considered. Bony structures and soft tissues captured in CBCT and occlusal surfaces of intra oral scan were incorporated into personal characteristics from facial scan. The patient had insufficient buccal bone on maxillary anterior area. The maxillary implants could not be placed on the most ideal position. However, the "top down" approach completed by computer-generated arranging of teeth in implant planning and surgery with surgical guide resulted in esthetically and functionally satisfying result regardless of the limitation. Careful diagnosis with digital technique and the usage of surgical guide resulted in successful surgery and esthetic restoration. The temporary fixed prostheses were designed, restored and evaluated. The patient was not satisfied with the first design of temporary prosthesis, which showed uneven space distribution between teeth due to the position of maxillary implant. The design was modified by changing proximal emergence contours and line angle to alter the perceived since of incisors. The patient was satisfied with the new design of provisional restoration. A digital occlusion analyzer (Arcus Digma II, KaVo, Leutkirch, Germany) was used to measure inherent condylar guidance and anterior guidance of a patient to provide a definitive prosthesis.

• The Journal of Korean Academy of Prosthodontics
• /
• v.62 no.4
• /
• pp.375-385
• /
• 2024

In esthetic prosthetic treatment, color, shape, texture of teeth, and harmony with the facial appearance are considered very important. The virtual patient is formed by integrating data from intraoral and facial scans and mandibular movement records, making fabricating more aesthetic and functional prostheses possible in digital dentistry. In this case report, the patient with the tilted occlusal plane and facial asymmetry was restored with an anterior maxillary implant and a tooth-supported fixed prosthesis using the virtual patient. By using a virtual patient, it was possible to communicate between the dentist and patient or the dental technician during the design process, and we report this case because the results showed satisfactory aesthetic and functional results after treatment.

• Aerospace Engineering and Technology
• /
• v.13 no.2
• /
• pp.131-141
• /
• 2014

Synthetic Aperture Radar (SAR) is a powerful and well established microwave remote sensing technique which enables high resolution measurements of the Earth surface independent of weather conditions and sunlight illumination. In this study, this paper first summarizes the basic SAR theory and the history of the SAR satellites. The second part of this paper gives an overview of new technologies for future SAR systems. New innovative concepts and technologies for SAR satellites will be digital beamforming, High Resolution Wide Swath (HRWS), Waveform Encoding, Terrain Observation by Progressive Scan (TOPS), and so on. These technologies will play an important role for future spaceborne SAR satellites.

• Proceedings of the KIEE Conference
• /
• 1999.07g
• /
• pp.3204-3205
• /
• 1999

G3 팩스가 G1 팩스나 G2 팩스와 구별되는 점은 문서 이미지를 스캔하여 얻은 아날로그 신호(전압)를 디지털 신호로 바꿔주는 A/D 변환과 여기서 얻어진 디지털 신호를 전송을 위해 다시 아날로그 신호(주파수, 위상 진폭)로 바꿔주는 모듈레이션 과정이 중간에 신호를 압축하여 표현하는 코딩 단계가 있다는 것이다. 따라서 G1 팩스나 G2 팩스에 비해 s훨씬 적은 신호를 가지고 문서 이미지를 표현할 수 있으며, 결과적으로 전송속도가 빨라지는 것이 된다. 표준 A4용지는 수평 방향으로 1728개의 픽셀, 수직방향으로 1145라인의 픽셀로 구성된다. 따라서 층 1,978,560($1728{\times}1145$) 비트의 데이터가 A4용지 한 장에 포함될 수 있는 것이다. 팩스가 이런한 표준 A4용지를 스캔하게될 경우 수캔되는 매 라인에는 1728개의 검은색(글자 및 그림) 및 흰색 (여백)픽 셀들이 존재한다. G3 팩스는 서로 다른 Run Length에 비교적 짧은 특정 코드를 미리 할당해 놓고 실제 픽셀들 대신 이러한 코드들을 모듈레이션해서 전송한다. 따라서 전송속도는 단축된다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.56 no.3
• /
• pp.250-257
• /
• 2018

Generally dentures are manufactured by conventional method, however the frequency of fabricating denture using digital method is increasing due to the recent development of digital technology in dentistry. The digital method of manufacturing denture is classified into two systems; 3D scan of the impression to arrange the artificial teeth on the CAD (Computer-aided design) and 3D printing to produce the resin-based complete denture, or 3D scan of the model to design of the framework using CAD, resin pattern formation by 3D printing and casting of metal framework of complete denture or removable partial denture. In this case report, electronic surveying and design the metal framework of the dentures were performed using CAD program, and plastic resin patterns fabricated by 3D printing were casted for upper full denture and lower removable partial denture. During follow-up periods, dentures using digital method have provided satisfactory results esthetically and functionally.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.34 no.2
• /
• pp.104-115
• /
• 2018

Purpose: The purpose of this study is to evaluate the image acquisition ability of intraoral scanners by analyzing the comprehensiveness of scanned images from standardized model, and to identify problems of the model. Materials and Methods: Cast models and 3D-printed models were prepared according to international standards set by ISO12836 and ANSI/ADA no. 132, which were then scanned by model scanner and two different intraoral scanners (TRIOS3 and CS3500). The image acquisition performance of the scanners was classified into three grades, and the study was repeated with varying surface conditions of the models. Results: Model scanner produced the most accurate images in all models. Meanwhile, CS3500 showed good image reproducibility for angled structures and TRIOS3 showed good image reproducibility for rounded structures. As for model ingredients, improved plaster model best reproduced scan images regardless of the type of scanner used. When limited to 3D-printed model, powdered surface condition resulted in higher image quality. Conclusion: When scanning structures beyond FOV (field of view) in standardized models (following ISO12836 and ANSI/ADA 132), lack of reference points to help distinguish different faces confuses the scanning and matching process, resulting in inaccurate display of images. These results imply the need to develop a new standard model not confined to simple pattern repetition and symmetric structure.