• Journal of Convergence for Information Technology
• /
• v.9 no.8
• /
• pp.134-139
• /
• 2019

This paper describes the effect of multiple signal regeneration in quadrature digital radio frequency memory(DRFM). Single channel DRFM have good reproducibility after storing a single signal. However, when reproduced after storing multiple signals, the spurious signal is large. The quadrature DRFM consists of I and Q channels, which can greatly reduce the spurious signal. The amplitude of the spurious signal depends on the number of bits of data stored in the DRFM. In this paper, we have obtained the number of bits of signal regeneration according to the application of radio frequency memory by obtaining the size of the spurious signal according to the number of bits of the stored data of the DRFM for multiple signals. As a result of this study, 4 bits quadrature DRFM can achieve a spurious output of less than -20dB, which is used for 4 signals. Those are expected to greatly contribute to the signal analysis of electronic warfare equipment and the development of jamming device.

• Proceedings of the Korea Contents Association Conference
• /
• 2004.05a
• /
• pp.372-376
• /
• 2004

Digital memory circuits have been developed very fast according to the progress of semiconductor technology But It was very difficult to memorize a high frequency radio signal. Many years ago an analog loop was used for store of radio frequency signal, and the digital radio frequency memory was made to the development of wideband amplifier and high speed sampler. We present a design of wide-band DRFM using Johnson code and the simulation results with respect to the sampling speed. in this paper.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.6 no.5
• /
• pp.401-406
• /
• 2005

Digital memory circuits have been developed very fast according to the progress of semiconductor technology. But it was very difficult to memorize a wideband radio frequency signals. Many years ago, an analog frequency memory loop(FML) was used for store of radio frequency signal and the digital radio frequency memory was made according to the development of wideband amplifier and high speed sampler. We present a design of wideband digital radio frequency reproduction device using ladder circuit and the simulation results with respect to the sampling speed in this paper.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.7
• /
• pp.669-674
• /
• 2011

In this paper, a method for reduction of spurious signal in Digital RF Memory(DRFM) is proposed. Spurious response is a major performance issue of DRFM. This method is based on mixing a random phase LO signal into input IF signal and sampling it. The random phase LO signal is generated by high speed phase shifting characteristic of Direct Digital Synthesizer(DDS). Through this technique, we achieved an enhancement of 5~10 dB of spurious response.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.10
• /
• pp.7196-7203
• /
• 2015

The purpose of this study is to evaluate the value of the development technology for the Digital Radio Frequency Memory(DRFM), which is a core part of the aircraft jamming equipment to retransmit the jamming signals. In this study, we evaluated the values of the development technology using DTV, which is a developed methodology for the evauation of defense technology by the Defense Agency for Technology and Quality(DTaQ). From the results, the economic value for the DRFM development technology and the multiplier of public benefit considering the peculiarities of defense technology were evaluated in 854 million won and 0.7899, respectively, and the public benefit value was calculated as 675 million won. The final value of the development technology was evaluated in 1,529 million won.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.507-511
• /
• 2010

Digital Radio Frequency Memory (below, DRFM) performs RF signal data store, delay and re-transmission. DRFM is wildly used as core module of Jammer, EW simulator, Target Echo Generator etc. This paper suggests a hardware design of DRFM which is composed RF section(RF Input/Output Module, Local Oscillator Module) and Digital section(ADC module, memory, DAC module), and confirm the validity of the propose by the test result.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.9
• /
• pp.2164-2170
• /
• 2010

Digital Radio Frequency Memory, ( as DRFM ), is a device with the ability to restore output to the input RF signal in the required time after storing the incoming RF signals. Therefore DRFM is widely used in Jammer, EW Simulator, Target Echo Generator, and so on. This paper proposes its hardware implementation composed with the high frequency part and the digital processing part consisting of RF input/output module and local oscillator module. It is also proposed the replicated signal generation method which is consisted of the Analog-Digital conversion in the form of pulsed RF signal quantization, and FPGA to save and produce the playback signal, and RF signals to produce a Digital-Analog Conversion in the digital processing unit. This proposed scheme applied to test board and confirmed the validity of the proposed scheme through the test results obtained by the simulated input signals.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.7
• /
• pp.955-961
• /
• 2021

In modern warfare, the importance of electronic warfare, which carries out a mission that using radio wave to find out enemy information or to protect ally information, has increased. Radar jamming technique is one of the most representative techniques of EA(Electronic Attack), it disturbs and deceives enemy radar system in order to secure ally location information. Velocity deception jamming technique, which is one of the radar jamming techniques, generally operate against pulse-doppler radar which use doppler effect in order to track target's velocity and location. Velocity Deception Jamming Technique can be implemented using DRFM(Digital Radio Frequency Memory) that performs Frequency Modulation. In this paper, I describe implementation method of VGPO/VGPI(Velocity Gate Pull-Off/Pull-In) velocity deception jamming technique using phase-sampled DRFM, and verify the operation of VGPO/VGPI velocity deception jamming technique with board test under signal injection condition.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.6A
• /
• pp.611-621
• /
• 2010

When an enemy platforms transmit electronic jamming or tracking interference signal to a friendly ship's radar, the radar have to avoid the jamming and to track targets continually without losing the targets with the electronic protection techniques. Electronic protection is an essential key for a platform to survive in electronic warfare, for this purpose, jamming simulator was developed to provide electronic warfare environments for the test and evaluate the effectiveness of radar's electronic protection techniques. Jamming simulator has ability to generate a variety of deception and noise jamming signals using the DRFM which minimize phase distortions of 1GHz broadband radar signal with the phase sampling method. This paper presents the design contents of the jamming simulator to process the analysis of broadband radar signal and generate jamming signal, also proposes the algorithms of the deception and noise jamming and verifies the effectiveness of the simulator by field trial.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.26 no.8
• /
• pp.1213-1221
• /
• 2022

In Electronic Warfare, the need to develop a jamming system that protects our location information from enemy radar is constantly increasing. The jamming system normally uses wide-band DRFM(Digital Radio Frequency Memory) that processes the entire bandwidth at once. However, it is difficult to jam if there is a CW(Continuous Wave) interference signal in the band. Recently, instead of wide-band signal processing, a structure using a filter bank that divides the entire band into several sub-bands and processes each sub-band independently has been proposed. Although it is possible to handle interference signal through the filter bank structure, spurious signal occurs when the signal is received at a boundary frequency between sub-bands. Spurious signal makes a output power of jamming signal distributed, resulting in lower JSR(Jamming to Signal Ratio) and less jamming effect. This paper proposes an over-sampled channelized DRFM structure that enables interference response and prevents spurious signal for sub-band boundary frequency input.