• Journal of The Korean Digital Architecture Interior Association
• /
• v.8 no.2
• /
• pp.21-28
• /
• 2008

The main purpose of this paper is to find the phase-in of BIM adoption by focusing on the level of integration. BlM should be aimed at integration and collaboration of all parties furnishing design and construction services to increase the productivity. Therefore, the degree and depth of integration for project collaboration is very important to BlM design process. One of the key advantages of full integration is that is to facilitates the development of detailed information much earlier in the entire design process to improve collaboration among stakeholders. Such integrated use is the ultimate method, but even so, it's not the precondition of BlM. One of the key advantages of relatively low integration as a transition phase is to adopt the BlM earlier than full integration. Such transitional and non-integrated BIM can also reduce the possibility of trial and error in BlM adoption. Therefore, this paper focused on non-integrated use of BlM as a substitute of full IPD by analyzing obstacles in BIM adoption.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.5 no.1
• /
• pp.1-8
• /
• 2005

The major goal of this study is drawing design plan factors considering residents' life cycle and life style when remodeling design is needed. By drawing such design factors, the study will propose an alternative remodeling design plan. Such design method was defined as Multi-Dimensional module design method. And constructing data-system based on Multi-Dimensional module was secondary goal in this study. The details are as follows: Based on analysis of Residents' demand for remodeling and features of emotion-design applied to remodeling, the system which is suitable for application in remodeling design method was conducted. Based on the type of construction materials, the level value was set up according to emotion-factor application. Also, by conducting coding operation according to the distinction of construction materials, this study seeks the unit drawing method of information for constructing emotion-information system.

• Journal of Digital Contents Society
• /
• v.13 no.4
• /
• pp.483-490
• /
• 2012

The evaluation procedure of friendly-environment Preliminary certification is traditionally done by hand. It takes much time and a lot of manpower. Sometimes it is subject to the evaluator's experience. The solution to these problems is to systematize the evaluation procedure. The system can provide an objective standard for evaluation. It can develop more reliable standard, prevent errors, and save time. Therefore, this research suggests the evaluation system using the architectural information based BIM. To do this, the current study examines the possibility of evaluation system of friendly-environment Preliminary certification.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.3
• /
• pp.89-97
• /
• 2011

Accelerating economic growth since the 1960s, penetration rate of the House of Commons has been increased. However, design competition has been imposed for improve of the qualitative level in modern because it was quantitative increasing. Even though its design quality is improved by introducing design competition, distorting the design is increased for the purpose of election. For that reason, errors of information and design changes are increased. So BIM(Building Information Modeling) is adopted to solve the problems. In this study, BIM process on the basis of the existing design process was to clean up and LoI(Level Of Information) based on the level of information was newly defined. Working-level of the design competition is plan-basic design. LOI level is LOI1-LOI2 in plan and Lol3-LOI4 in basic design. At each step of the operation was to clean up the level of detail and content. Also exchange of data in each area and feedback about content are to clean up.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.9 no.3
• /
• pp.37-45
• /
• 2009

New city development policy caused many effects such as destruction of nature and area native culture extinction through fast development within short period. The architectural context is remains by post-modern most difficult problem had left to architects. We need to find the design method that communicate and contacts character of place, cultural context through the actual project. In this study, we propose the method of aspect of compose space and design elements to succeed the cultural place and context, desirable development through the design proposal for Dochon welfare center. In Dochon area, there is no original character of the place because of indiscreet development. Dochon synthesis society welfare facilities is openable to people by space that nature and human contacts and accomplishes relation, Made efforts to do so that can do part that causes human's ripple effect of contact with human and accomplishes traffic and recovers identity of Dochon area at the same time recovery of community consciousness.

• Journal of KIBIM
• /
• v.9 no.2
• /
• pp.29-44
• /
• 2019

This paper is to explore examples of complementary use of digital and physical models. The reason for this is to suggest a method for commercializing architectural design considering high technology. These cases are the practical and educational environment in which design processes based on digital computation technology are performed. Also, in this environment, analog design media (eg, physical models) still being used in the design process using digital computing. Indeed, in this environment, designers are exploiting digital and physical models to address the types of risks that can be discovered when designs are implemented and these risks. By analyzing these cases, we define the roles of digital and physical models to visualize and resolve risks. This paper focuses on one of method as "prototyping", which is used in the field of machinery and is a difficult method to carry out in the conventional design process. In particular, designers look for benefits that encourage designers in utilizing current digital computation technologies (eg, parametric design, simulation, building information models, and digital fabrication). Among the roles of the physical model, roles that can not be replaced by the digital model are explored. It is clear that this case-based study has difficulty in generalizing the design method. However, it helps the designers of today's practical and educational environment to verify and design the actual details of construction and operation when applying and developing unfamiliar materials and methods in the field of architecture.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.13 no.4
• /
• pp.69-76
• /
• 2013

As the energy consumed in building area has occupied a lot when looking into energy usage weights in area over the world, energy reduction building, eco-friendly architecture comes to the fore in the modern architecture. Discussions on the eco-friendly architecture have various concept definitions and targets to be achieved.The architectural works of Norman Foster are expressed as high-tech buildings using iron, glass, etc. in appearance, but they appear as those buildings with low energy load by analyzing environmental conditions from initial design stage that each building has, utilizing natural energy with design of outer shell and applying proper technical system. Thus, this study aims at providing basic data of outer shell planning through eco-friendly element technologies by considering pattern and outer shell design of buildings, principles of eco-friendly building plan as an eco-friendly building planning technique of Norman Foster as an example of plans to utilize building pattern, outer shell design and natural environments, in order to utilize passive measures as much as possible to increase energy saving methods and increase comfort by analyzing element technologies in the eco-friendly architecture in line with the modern flow.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.3
• /
• pp.67-79
• /
• 2012

The purpose of this study is to suggest the interior architecture design studio through the pedagogical method of educational technology for college students who lack self-directed learning. The pedagogical method has been organized to make a student-centered class based on the operation of existing architectural design studios. This teaching and learning method emphasizes the role of teachers as facilitators to help students lacking in self-directed learning in the design process, the BIM visualization to give students an expression of design project and the critics to give students an experience of working circumstances. The results of this study can be summarized as follows. First, This pedagogical model can improve the self-directed learning of students, accomplish the design process well through teamwork, and provide problem based learning (PBL) to settle obstacles that come up during the project. Second, through this model, students can improve their field design capacity by instructor, design feedback and criticism. Finally, This model can suggest new pedagogical methods for interior architectural design studios and management of student-centered studios.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.12 no.2
• /
• pp.25-32
• /
• 2012

환경디자인은 건축, 도시, 조경 등 서로 다른 분야의 전문가 및 대상 지역 거주하는 일반시민 등 많은 참여자를 가지는 특징이 있다. 이러한 협조설계 단계에서는, 시행착오를 최소화시키기 위해서 디자인 초기단계에서부터 각 분야의 전문가들이 계획에 관해서 협의하여 디자인 내용을 변경해 나갈 필요가 있다. 또한 대상지 지역을 누구보다 잘 이해하고 있으며 계획 후 이 지역에 살게 될 주민들의 참여도 환경디자인 단계에서 고려해야 할 중요한 요소 중 하나이다. 여러 분야의 전문가 또는 비전문가들이 서로 커뮤니케이션하고 협조하기 위해서는 누구나가 쉽게 디자인 내용을 이해 할 수 있는 커뮤니케이션 툴이 필요하다. 이러한 필요성을 만족시키기 위해서는 빠른 구축속도, 대화형 기능, 빠른 표현속도, 사실적인 표현기술 등이 필수 조건이라고 할 수 있다. 본 연구에서는 이러한 환경디자인 분야의 전 분야에서 의사결정을 지원하고 디자인 안을 검토할 수 있는 3D CG 시스템을 개발하고 이 시스템을 실제 프로젝트에 적용시켜서 활용하면서 개발된 시스템의 기능강화를 추진하며, 실제 프로젝트 적용을 통한 시스템의 평가를 진행하여 본 연구에서 개발한 시스템의 유용성을 증명하는 것을 본 연구의 목표로 한다.

• Korean Journal of Construction Engineering and Management
• /
• v.14 no.4
• /
• pp.84-96
• /
• 2013

Recently, architectural design has been changing from formal design to freeform design due to the digitalization of construction industry. Especially, the formal design has been accepted as a design trend recently and applied many times as a design concept in the architectural design competitions such as turn-key. However, various deflects such as water leak and cracks have been occurred because the traditional construction methods had been applied without any revision or adaptation of the formal construction method for the freeform building construction. Design and construction of freeform building has been developed as an new method in order to solve the problems and minimize the construction duration and cost for the freeform building. Therefore this research deduced the positive implications for developing freefrom envelope by analyzing the domestic and abroad cases and proposed the considerations during design and construction of the freeform envelope as follows. First, the freeform design should consider the constructability for the freeform envelope. Second, manufacturing technology for the two-way curvature of the unit panel should be developed. Third, exposed concrete form method should be developed for the freeform envelope of concrete. Forth, material characteristics, construction method and facility management should be considered in order to manage precipitation and keep water-proof according to the classification of the freeform envelope area.