• Journal of The Korean Digital Architecture Interior Association
• /
• v.8 no.1
• /
• pp.5-14
• /
• 2008

This study is the one of the step to propose the Design studio course that apply concept of 'BIM" that is new digital environment of Architecture. This Study propose as followed, First. The proposal of the experimental course of the Design studio, Second, Application of course of study, Third, The design course of study is proceeded by purpose of completion of BIM. This study is proceeded by the purpose of the concept of the BIM first and proposals of fundamental ideas that apply the idea. Proposed training courses are marked by that divide three areas of information - architecture information, environment information, drawing information - with process consisted in professional practice of design and adjust each process and sequence. Also, this study suggest process that applying BIM tools in this work as the basis frame.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.5 no.2
• /
• pp.15-20
• /
• 2005

It extended in the opening after simultaneous strong point flag and to Incheon the building where the designer whom the many modem time building comes to build but becomes known was not many so. The research against these people did not become accomplished and not to be the back author research which analyzes the work propensity which is the possibility of doing the possibility of becoming accomplished there was not a basic of architectural design. The research which it sees it led and khu lu thu the road khey keyl the back the depths data, it confronted compared to it secured does not become known during that time the multi architect who and the plan office and and and it searched the result of the back which it puts out well it put to the architects who become known and.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.18 no.3
• /
• pp.1-6
• /
• 2004

Recently the examples of a designing a building-lighting to which LED, a solid state Lighting, is applied are increasing in number, but the development of lighting apparatus and the techniques applied to a designing lighting apparatus frequently don't fit to a new source of light. This essay refers to the matters relevant to the techniques for designing a lighting, which are controlled with a digital technology, and the effectiveness of a "Interactive-lighting technique" which has a ductility by a sensor with developing a digital source of light module and applying it to a real designing a building-lighting . In the negative aspect that a digital technology can standardize a space for a lighting, a "Interactive-lighting Technique", which detects an analogic change of nature through a sensor and produces it, can become a new alternative one.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.1 no.1
• /
• pp.39-45
• /
• 2001

The purpose of this study is to suggest the possibility which can use as instrument of design by CAD system. And it proposes how makes 3D object model through 2D Drawings in Design process. This study has review the 'Study Drawing' in design process, and application method of CAD as the Architectural Design Integration System. The Architecture can work in ani of the traditional 2D representations as well as in 3D and immediate visual feedback of his work in isometric and perspective projrctions.

• Journal of the Korea Institute of Building Construction
• /
• v.13 no.5
• /
• pp.434-440
• /
• 2013

Generally, the envelope of a freeform building is composed of a structure made with rectangular or C-shaped steel pipe, and steel or aluminum panel finishes on the structure. However, these construction methods increase material loss and cost and time. There are also numerous cases of misunderstanding of design and difficulties in construction, which frequently cause construction errors. Such construction errors decrease construction productivity, resulting in poor construction quality and the need for rework, as well as cost and time overruns. To solve the problem, this study proposes a 3D coordinate control technology for freeform structure implemented through a CNC(Computerized Numerical Control) Twisted tube method, and by extension, develops a BIM-based envelope construction method for freeform building.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.11 no.4
• /
• pp.57-66
• /
• 2011

The advent of BIM(Building Information Modeling) design process based on the digital media has brought innovation to the production and management of AEC industry. Accordingly the need for educating BIM professionals has been radically increased both in the real world practice and in academia. Some developed countries have already been studying and establishing the optimized curriculum in the academic architecture courses for BIM based education with multi_efforts using the digital media as design processing tools focused on educating architectural professionals with creativity and productivity. However in the domestic education systems, it is hardly found that researches and curriculums deal with the BIM education in the academia. Thus the objective of this paper is to investigate the architectural design pedagogy in the advanced digital media setting in response to the urgent need for BIM education. This study focuses on developing the curriculum based on practical adaptation of BIM programs for architectural education. It aims to provide students with the basic understanding of BIM theory and the practice of BIM tools as an instrument enhancing the creativity for architectural design. Thus this study proposes an BIM curriculum for the students who first encounter the notion and knowledge of BIM during their academic years. And the education result after the application of this curriculum has been analysed through the students questionnaires before and after the lecture.

• Journal of Korea Multimedia Society
• /
• v.15 no.3
• /
• pp.408-416
• /
• 2012

As increasing interests for cultural content, 3D restoration about the valuable traditional architectures is in progress, nowadays. Digital restoration is generally performed with using new IT technology and equipments such as 3D scanner. From the view points of making better use of the 3D data, the methodology for 3D restoration leaves much room for improvement. When using 3D scanner, it is possible to get precise 3D data for exterior of the building but huge data size and insufficient information for the wooden intra structure might be obstacles for using them as a source of various digital contents. In traditional wooden structure, the binding rules for corresponding architectural components are important factor for realizing the architectural culture at that times. In this paper, we develop a design tool and architectural components reflecting the wooden intra structure. Moreover, we propose a new 3D restoration method from the design tool, which is good for making contents offering useful information for processes of construction and binding rule in a real time just at a glance.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.9 no.1
• /
• pp.31-40
• /
• 2009

This study is intended to suggest methodologies in theory that is dedicated to improve existing features in BlM tool sets and introduce a new horizon for developing new features in the future so that more functionality can be provided to the work process of architect. To be more utilized of BlM tool sets in a useful way, it is important to make sure to program a calculation method used in the design process which is based on the information provided by architect, such as design item with detailed process and transformed parametric information on warranty data. Finding pros and cons in the usability from the well-known 3D modeling applications and taking highly usable UI features from the existing applications, and using a common wording were carried out. Design architect identifies reusable parametric information and then finds an algorithm between each items so that BlM tool sets can contribute to design field in the future. Therefore, the formula has been developed for the items considering business aspects and architecturing size in the preliminary-design, and design aspects in the schematic design with idendifying inputs and outputs that is necessary to become fixed factors.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.4
• /
• pp.265-272
• /
• 2023

This paper presents a conceptual strategy and technologies for the digital transformation of design and construction of reinforced concrete (RC) structures. The development of an automated detail design strategy for RC structures is described. Integrated digital platform based on 5D BIM concept is proposed for the replacement of the current technology environment-based 2D CAD. Generally, the detail design development is labor-intensive and iterative. Effective automation of relevant aspects can dramatically improve productivity and accuracy. The proposed solutions for the automated BIM modeling based on the rebar and formwork detail design automation achieves the productivity and accuracy sufficient for site application. The platform integrates and manages the information flow between each solution or application and provides it to all participants of the project. Finally, it is expected that the proposed strategy and technologies can be further enhanced to achieve the productivity and accuracy needed for widespread site application and digital transformation.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.8 no.2
• /
• pp.93-104
• /
• 2008

Purpose of this paper is to research about new building type of Korean library and suggest the design of Library which based on the building type changes. This research is based on the idea that change of building type could be derived from Architects' designs. So, we analyzed space programs of Gunpo Library competition, redefined the space programs and suggested the direction of building type changes with program changes through design processes. The conclusions of this research are follows; first, we suggested new zoning system in library building design that is consisted of three separate building based on each building's own functions. Second, new zoning and library design would be helpful to making plan about library building competition. The method that we tried at this projec is useful to other complex building designs which have necessities to redefine building type.