• Journal of the Korean Society for Railway
• /
• v.17 no.2
• /
• pp.94-99
• /
• 2014

Recently, trends in new transportation system development have been primarily focused on sustainable and ecofriendly mobility solutions. The personal rapid transit (PRT) system has been considered a promising candidate in this category; its competitiveness is being improved through convergence with cutting-edge electric vehicle (EV) technologies. However, battery-powered vehicles pose difficult technical challenges in attempts to achieve reliable and efficient operation. In this study, a design approach for a solar-power assisted PRT system is presented with small-scale demonstrations aimed at circumventing challenges facing its adoption, as well as helping speed the transition to electric-powered ground transportation. From the results, it is expected that flexible photovoltaic (PV) cells will be able to supply 11% of the power required by the service equipment installed in a prototype vehicle. In particular, flexible photovoltaic (PV) cells are advantageous in terms of cost, weight, and design considerations. Most importantly, the cells' flexibility and attach-ability are expected to give them great potential for extended application in various areas.

• Journal of the Korea Fashion and Costume Design Association
• /
• v.23 no.3
• /
• pp.1-10
• /
• 2021

Harnesses are used in a variety of industries, such as rescue operations, medicine, and entertainment. However, conventional harnesses have problems as they are uncomfortable to wear and causes continuous pain. Therefore, in this study, the load and pressure applied to the body in the flying state when using a conventional harness were measured in real time and the distribution change was observed. Load and pressure were measured using a modified corset harness, a pressure sensor, and a human mannequin to measure the maximum and average pressure on the waist. As a result, it was confirmed that the load concentrated on the waist in the flying state was 104 N, and the pressure was applied to the left and right sides was 800 kPa or greater. The pressure distribution showed a pressure of 3-45 kPa in 73% in all measurable pressures. The results of the load and pressure distribution are presented as basic data for improving the wearability and reducing the discomfort of harnesses in the future, aid in the development of a harnesses that can minimize discomfort for various activities, and increase the concentration on experiential activities. In addition, using the CLO 3D program, which is a 3D virtual wearing system, a harness was put on a virtual model, and the compression level was checked and compared with the actual pressure distribution. As a result of comparing the measured pressure values in the flying state with the clothing pressure wearing the harness in the CLO 3D program, the total pressure value was found to be about 68% of the actual measured value. This helps develop a harness that can minimize discomfort during activities by predicting the load and pressure on the body by first applying new designs to a virtual wearing system during development. These new harness patterns can solve the problems of conventional harnesses.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.9
• /
• pp.481-487
• /
• 2019

Additive manufacturing is a state-of-the-art manufacturing process technology in which three-dimensional structures are fabricated by laminating two-dimensional sections of a structure using various materials such as plastic, ceramics, and metals. The additive manufacturing technology has the advantage of high design freedom, while the surface property (roughness) of the finished product varies depending on the process conditions, which necessitates performing a post-process after the products are manufactured. In this study, the surface roughness of a structure made of polyamide 12, which was manufactured by SLS (Selective Laser Sintering) and MJF (Multi Jet Fusion) process was compared. The processing condition was classified by the building orientation of structure as 0, 45, and 90 degrees, which is the angle between the analytical surface and the horizontal plane of the fabrication platform. Structures with a hole of various diameters ranging from 1mm to 10mm were manufactured and the hole characteristics (ratio of hole depth to diameter) and results of the specimens were compared. As a result of the surface characteristics analysis, the surface roughness value of the specimens manufactured with a building orientation of $45^{\circ}$ was the highest in both technologies. In the case of the through-hole structure fabrication, the shape was maintained with 5mm and 10mm diameter holes regardless of the building orientation, although the hole forming was difficult for the smaller holes.

• Journal of the Microelectronics and Packaging Society
• /
• v.25 no.4
• /
• pp.129-135
• /
• 2018

In the stretchable electronic devices, the stretchable substrate is a very essential material which determines the stretchability, performances and durability of the stretchable electronic devices. In particular, the current stretchable materials have hysteresis making difficult to used as sensors and other electronic devices. In this study, we developed a PDMS-Ecoflex hybrid stretchable substrate mixed with PDMS and Ecoflex material in order to increase stretchability and improve hysteresis characteristics. Mechanical behavior of the hybrid substrate was evaluated using a tensile test, and optical transmittance of the hybrid substrate was also measured. As the content of Ecoflex increases, the PDMS-Ecoflex hybrid substrate becomes more flexible, and the elastic modulus decreases. In addition, the PDMS substrate failed a tensile strain of 270%, while the PDMS-Ecoflex hybrid substrate did not fail even at 500% strain indicating excellent stretchability. In the repeated tensile test, the hybrid substrate with 2:1 mixing ratio of PDMS and Ecoflex showed hysteresis. On the other hand, in the case of the hybrid substrate with the mixing ratio of 1:1, hysteresis did not occur at a strain of 50% and 100%. Hence, we developed a stretchable substrate with over 150% stretchability and no hysteresis characteristics. The optical transmittance of the Ecoflex substrate was 68.6%, whereas the transmittances of the hybrid substrate with mixing ratio of 2:1 and 1:1 were 78.6% and 75.4%, respectively. These results indicate that the PDMS-Ecoflex hybrid substrate is a potential candidate for a transparent stretchable substrate.

• Journal of the Microelectronics and Packaging Society
• /
• v.28 no.2
• /
• pp.29-37
• /
• 2021

The effect of Ar/N₂ two-step plasma treatment on the quantitative interfacial adhesion energy of low temperature Cu-Cu bonding interface were systematically investigated. X-ray photoelectron spectroscopy analysis showed that Ar/N₂ 2-step plasma treatment has less copper oxide due to the formation of an effective Cu4N passivation layer. Quantitative measurements of interfacial adhesion energy of Cu-Cu bonding interface with Ar/N₂ 2-step plasma treatment were performed using a double cantilever beam (DCB) and 4-point bending (4-PB) test, where the measured values were 1.63±0.24 J/m² and 2.33±0.67 J/m², respectively. This can be explained by the increased interfacial adhesion energy according phase angle due to the effect of the higher interface roughness of 4-PB test than that of DCB test.

• Korea Science and Art Forum
• /
• v.20
• /
• pp.147-158
• /
• 2015

This study made an approach to the industrial exhibition space, which is a medium of marketing communication, from the position of an enterprise and consumers through the output of Space Design, and conducted it with focus on B2B transactions among specialized exhibitions. In addition, this study inquired into what factors should be considered along with space design by interpreting the purpose of participating in the exhibition and space design of the enterprise which supply capital goods, elements, related technologies and materials, etc. This study aimed at drawing the direct/indirect effect, produced by space design, on the marketing by analyzing correlation between space design and participating enterprises' marketing. Despite the marketing effect of the exhibition, which was proved by preceding research results, the reality is that exhibition-participating expenses work as considerable burden on enterprises. Particularly, booth design, which is forming the most proportion among the participating expenses, was found to have insufficient influence on visitors due to the decline in its importance among diverse factors influencing visitor's decision to visit a booth. Regardless of the business category of participating enterprises in the exhibition, the standard of exhibits was ranked as the most important consideration factor in visiting a booth. Even by business category, the standard of booth design rarely had an influence on booth visit. Booth design had an affirmative influence on participating enterprise's preference, but its influence on product purchase or business talk & contact with a participating enterprise or price was found to be extremely low. It's difficult to judge marketing success or failure of an exhibition by the form and standard of booth design. Preferably, this study infers that it's necessary to put much weight on qualitative excellence of an exhibition, which consists of participation of an enterprise in possession of excellent technologies, exhibits with higher standards and high-quality visitors with purchasing power. This study suggests that it's more effective to set up the plan for expansion of participation in exhibition by optimally regulating the proportion of space design in participating expense to increase marketing effectiveness of an exhibition. The limitations of this study, analysis of which based on the visitors to an exhibition only, requires supplementation through the follow-up research work on participating enterprises in the exhibition.

• Journal of Korea Game Society
• /
• v.14 no.1
• /
• pp.59-68
• /
• 2014

As the prevalence of mobile platforms, expanding digital content production and also increasing interest about the serious game. However, existing educational serious games are short of application of educational function and lower effectiveness that not linked with off-line education. In this paper, we developed an educational serious game 'Rice-Mimi Adventure' for children based Tablet PC. The Games are designed five steps by four elements that storytelling, playing, music and cooking. Specially, players interaction between characters should be increase their own concentration and interest. For the effectiveness verification that linked education of on/off-line, experiment to 126 students of 3,4th grade in Choenan. A result shows positive data that on/off-line linked education using Tablet PC and effectiveness of game contents applied design factors. For this work, we should find effective class and teaching method using digital contents in off-line education for children.

• Archives of design research
• /
• v.12 no.3
• /
• pp.155-164
• /
• 1999

With the increase of milk consumption upto 54.5kgjperson as af the year 1994, dairy market has been mainly shared by a few specialized companies. Different from these, there are also remarkable companies like YeonSe Dairy, Konkook Dairy and SamYook University Food which are associated with Universities. These university-originated brands differentiate from others in the market with the advantage of positive university image and result in synergy effect between product image and univiersity PRo Located in Ansung, one of the most famous dairy areas, HanKyong National University designated as characterized university for Dairy by the Ministry of Agriculture and Forestry in 1996 has a big. advantage to build new dairy brand with attractive merits as like high education institute with R'll'&'ll'D, good logistics from market area, environmental condition for dairy industry and historical background as Agricultural university. Our New dairy brand has been created under the following concepts to have concrete brand image ; 1. Confidence - university logo 'll'&'ll' symbol designed together with "Characterized university for Dairy by government" 2. Fresh - Image differentiation through creative brand symbol 3. Health - Individual brand development specialized by each product

• Journal of the Korean Society of Costume
• /
• v.53 no.2
• /
• pp.35-55
• /
• 2003

The purpose of the study is to get some pieces of prior information to eventually develop competitive swimming suit designs with Korean traditional images. The study has been accomplished in following steps. First, as theoretical research, the history of swimming suit design and the requirements in designing competitive swimming suits were studied. Second, as practical research, at first, the trend of the competitive swimming suit designs in the national swimming suit market was examined. And then. the questionnaire surveys of both professional and amateur swimmers about their design preferences with purchasing and fabric-related tendencies were conducted for understanding professionals' characters more exactly. This data were analyzed through cross-analysis and multi-response analysis and x 2 was used. The results of this study can be summarized as follows : First, athletes' preferential design tendency for the swimming suit designs were examined in the aspects of style, color, pattern, logo, and accessary. In style, female athletes preferred an athletic one-piece style and male ones preferred a brief style. In color. neutral, mostly black was preferred most and cold color group like dark blue and navy blue next, regardless of sex. In addition, they preferred similar color coordination. In pattern, though solid fabrics were mostly preferred in both sexes, especially Taeguk motive were considered the most appropriate pattern to show Korean image. Besides, logo was considered importantly, and swimming caps and goggles of accessaries were generally used. Second, athletes' swimming suit purchasing tendency was as a following. the number of swimming suits possessed was more than 4 pieces. the durable period was less than 3 months. and the most important point considered in purchasing was an easy fitting for men and a design with an easy fitting for women. And most of swimming athletes preferred foreign products than domestic ones, which was attributed to excellent quality, easy fitting, and good design. and so on. Third, in fabric-related tendency, food touch, easy fitting. and opaqueness were considered importantly. and durability to chlorine, elasticity, color fastness, easy draining, lightness, and so on were demanded forward.

• Journal of the Korean Institute of Traditional Landscape Architecture
• /
• v.35 no.3
• /
• pp.105-112
• /
• 2017

Construction and urban development projects that drove urbanization were perceived as a main culprit that disturbs environment and ecosystems, including urban heat island, air pollution and a decrease in species diversity in urban area, as they do not consider natural environment and adopt consistent development behaviors and rapidly degrade the ecology of development sites. In order to build a sustainable green wall system, design process is configured as follows based on basic technology development direction, climate environment elements, climate design technology elements suggested earlier. Each part of required technology element is codified systematically and a sound Korean-style green wall system design direction will be suggested.