• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.3
• /
• pp.506-511
• /
• 2006

Silver is one of the most appropriate Jewelry materials for Jewelry casting and bench working. The technique known as 'Mokumegane' is good for making silver jewelry with natural patterns, such as wood grain patterns, but the process is not easy for silversmithing because it requires complicated and heavy labour. Instead of using conventional Mokumegane technique, we propose a new modified silver-copper casting process that enables a similar surface effect with good metal bonding strength between silver and copper. Simply pouring the molten silver into pre-aligned copper granules or 0.5 mm to 1.5 mm-thick copper sheets leads to well embedded copper silver ingots. The rolled silver plates from those ingots show excellent bonding interface even after the silver plate rolled ten times. We successfully fabricated prototype rings with copper embedded silver plates. Our result implies that our newly proposed process nay be a simpler way to fabricate silver jewelry with a pseudo-Mokumegane effect.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.52 no.9
• /
• pp.13-18
• /
• 2015

The mutilevel holographic data storage offers considerable advantage for capacity, since it can store more than one bit per pixel. In this paper, we search the number of codewords for each code depending on three conditions: (1) the number of levels, (2) the number of pixels in a codeword, and (3) the minimum Euclidean distance of a code. Increasing the number of levels per pixel creates more capacity, while causing more errors, by reducing the noise margin. Increasing the number of pixels in a codeword can increase the code rate, which means more capacity, but increases the complexity of the encoder/decoder of the code. Increasing the minimum distance of a code reduces the detection error, while reducing the code rate of the code. In such a fashion, a system design will always have pros and cons, but our task is to find out an effective one under the given conditions for the system requirements. Therefore, the numbers we searched can provide some guidelines for effective code design.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.280-280
• /
• 2011

유도결합 플라즈마를 이용한 식각 장치에서 플라즈마 균일도 향상에 대한 수많은 연구가 이뤄지고 있다. 안테나의 디자인, 인가 전력과 주파수, 안테나와 기판간의 거리, 기판과 챔버 외벽간의 거리 등 다양한 변수들이 변화되어 왔다. 또한, 최근에는 식각 균일도뿐만 아니라 식각 속도 향상에도 많은 관심이 모아지면서 유동에 영향을 주는 GDP 구조가 다시 중요해지고 있다. 본 연구에서는 300 mm 식각장치를 형상화하고, GDP의 구조와 유량비에 따라 플라즈마의 균일도에 어떻게 영향을 끼지는지 사용 유체역학 전산모사 프로그램인 CFD-ACE+를 이용하여 예측해 보았다. 안테나는 2중 직렬방식으로 안쪽과 바깥쪽의 안테나에 각기 다른 전력을 인가 할 수 있는 구조를 사용했으며, 압력은 10에서 60 mTorr까지 변화시켰다. GDP의 구조는 안쪽 입구와 바깥쪽 입구가 있으며 역시 따로 유량을 조절할 수 있도록 설계하였다. 안쪽 입구는 수직방향을 향하고 있으며, 바깥쪽 입구는 90도 이내의 각을 갖도록 꺾여 있는 것과 수평방향으로 주입할 수 있는 구조, 두 가지를 사용하였다. 유량 비율은 안쪽 입구와 바깥쪽 입구를 2:8, 5:5, 8:2로 고정하였다. 우선 GDP의 구조가 90이내의 각을 갖도록 주입되는 구조에서는 어떤 유량비율에서도 약간의 vortex가 발생했다. 수직방향의 유량이 감소될수록 기판에서 멀리서 발생했으며 강도 또한 감소했다. 기판 표면에서의 압력분포 균일도도 8:2에서 2.8%, 2:8에서 0.6%로 향상되었다. 2:8의 유량 비율에서 압력을 10에서 60 mTorr까지 향상시키면 vortex 효과는 감소되나 기판에서의 압력 균일도가 0.8%까지 약간 나빠졌다. 여기서 발생되는 vortex는 GDP 구조를 수평방향으로 주입되기 함으로서 해결할 수 있었으며, 압력 균일도도 0.2%까지 향상시킬 수 있었다. 또한, 강한 수직방향의 유량은 중심에 발생하는 플라즈마의 중앙을 밀어내는 효과를 확인했으며, 실험적 증명이 추후 연구단계로 진행될 예정이다. 식각 균일도나 식각 속도를 예측하려면 CF계열의 복잡한 가스를 사용해야하기 때문에 유량이 플라즈마에 미치는 영향을 보기 위해서 본 연구에서는 단일종인 Ar 가스만을 사용하였다. 첫 단계로 이와 같이 최적화시킨 유동조건에서 복잡한 식각가스를 이용한 플라즈마 계산은 다음 단계로 준비 중에 있다.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.1_2
• /
• pp.110-118
• /
• 2006

Cryptographic protocol design in a two-party setting has of tel ignored the possibility of simultaneous message transmission by each of the two parties (i.e., using a duplex channel). In particular, most protocols for two-party key exchange have been designed assuming that parties alternate sending their messages (i.e., assuming a bidirectional half-duplex channel). However, by taking advantage of the communication characteristics of the network it may be possible to design protocols with improved latency. This is the focus of the present work. We present three provably-secure protocols for two-party authenticated key exchange (AKE) which require only a single round. Our first, most efficient protocol provides key independence but not forward secrecy. Our second scheme additionally provides forward secrecy but requires some additional computation. Security of these two protocols is analyzed in the random oracle model. Our final protocol provides the same strong security guarantees as our second protocol, but is proven secure in the standard model. This scheme is only slightly less efficient (from a computational perspective) than the previous ones. Our work provides the first provably- secure one-round protocols for two-party AKE which achieve forward secrecy.

• Korean Journal of Construction Engineering and Management
• /
• v.15 no.4
• /
• pp.95-106
• /
• 2014

The outer surfaces of free form buildings contain panels with two-directional curvatures. To construct these panels, complex geometric surfaces should be divided into forms and sizes that can be manufactured and constructed efficiently. Because the bigger the curvatures of these panel, the more expensive the construction costs, these complex curvatures should go through optimal process of reinterpretation to minimize the curved surfaces with complex two-directional curvatures, which is called panel optimization. Small construction and design companies have trouble in calculating even rough estimate and cannot adjust expected construction cost of the panels based on comparison of design alternatives in conjunction with panel optimization process due to lack of knowledge and experience. This study conducts the research that can support designers' cost decision-making in the design stage of the free form buildings with respect to the panel optimization process. A 3D commercial application specialized to modeling free form shapes is used for the purpose.

• Journal of the Korea Society of Computer and Information
• /
• v.27 no.4
• /
• pp.231-239
• /
• 2022

In this paper, I analyze the difficulties of web service development education for non-IT majors through the Q&A of students posted in the k-mooc lecture, and propose methods to improve them. Through Q&A analysis, it was confirmed that non-majors mainly had difficulties in using unfamiliar tools, cost of cloud service, setting up server environment, and writing code while taking web service development courses. To solve this problem, I propose a method to reduce the server cost problem and the complexity of the server environment by using BaaS(Backend as a Service), which is one of the cloud service models. It also shows that it is possible to reduce the length of code that needs to be written at once by using the React library to modularize long code into smaller units. Finally, I propose an improvement plan that even non-IT majors can easily learn by implementing a web application that works by using the design output obtained by using Figma.

• The Journal of Korean Academy of Prosthodontics
• /
• v.60 no.1
• /
• pp.80-90
• /
• 2022

With the development of digital dentistry, it is being applied in various ways of dental treatment. This case report presents the definitive prosthesis designed in advance with a re-established vertical dimension and the digital technology, which determined the amount of tooth preparation, in order to preserve as much tooth structure as possible in a patient with pathological wear of the posterior teeth and loss of vertical dimension. For accurate tooth preparation, the guides of the occlusal and axial surfaces were digitally and additively manufactured. Then, aesthetics and anterior guidance were established at the provisional stage. The information of the provisional restoration was delivered to the definitive stage by double scanning. The digital technology, including the virtual planning and the guided tooth removal, produced the definitive restorations satisfactory to both the patient and clinician.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.4
• /
• pp.423-430
• /
• 2023

This dissertation discusses the formulation of a nonlinear storytelling board that preserves the contextual perspective of characters. Storytelling encompasses the director's creative intention by leveraging the interaction of various elements to construct a logical narrative that explores cause and effect. Its primary objective is to enhance viewers' empathy. Consequently, there is a pressing need for comprehensive research on differentiating storytelling from storyboarding. Moreover, the integrated approach to storytelling and storyboarding holds scholarly value in understanding the process of narrative composition and visualization. Thus, a study proposes a method for constructing nonlinear storytelling boards considering the discrete camera perspective and contextual scene continuity, ultimately contributing to visual complexity and correlation comprehension. This approach enables a careful and simultaneous consideration of the correlations that deepen cognition, including the physical, emotional, and event rhythms mentioned in Karen Perlman's theory.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.1
• /
• pp.52-60
• /
• 2021

The aim of this study was to derive a new trend by analyzing installations using 3D printing that are out of the limits of size and design according to the trends of developing 3D printing technology. This paper classified the types of installations using 3D printing and analyzed them with two trends: the trend of design and the trend of output. The trends of installations using 3D printing derived from this study are as follows. First, as the implementation of design through an algorithm is accomplished, the transformation appears with the atypical design that is prominent in complex expression. Second, Robotics and FDM 3D Printing is fused, which is changing the existing paradigm. Therefore, the production and utilization of installations using 3D printing proceeded at a faster pace through the interaction between the algorithm design method and freeform 3D printing technology. This study was conducted on installations using 3D printing around the world and played a basic role in the research on the production of installations using 3D printing along with domestic 3D printing technology to be developed in the future. Follow-up studies in various aspects, such as materials and combination methods, will be needed.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.494-500
• /
• 2020

Owing to the complexity of shapes and elements, some difficulties are found in the modeling and sharing phases in a project at the earlier design stages. This paper extends the boundaries by suggesting the data interoperability between 3D modeling software, McNeel Rhino 3D and BIM system, and Autodesk® Revit® Architecture. The main research methodology is to link the architectural form data in the NURBS supporting the 3DM format, especially for integrating surface properties into the mass family template of Revit. This algorithm-driven interoperability approach using visual programming, such as Dynamo in conjunction with Autodesk®, can be applicable in a theoretical part and also a practical use-case. This paper summarizes these results as sequence guidelines and project template recommendations suggesting an efficient design process to interoperate geometric data with the BIM system to manipulate and control the regular and curved form of office buildings.