• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.407-412
• /
• 2004

본 연구에서는 PMN-PT bimorph actuator를 이용하여 초소형 광디스크 드라이브용 광픽업 구동기를 제작하였다. 최근에 휴대용 기기에서의 고용량 정보 저장기기에 대한 필요성이 대두됨에 따라 착탈식이 가능한 수 기가급 초소형 광디스크 드라이브가 개발중에 있다. PMN-PT는 약 1.5kV/cm 이하의 전기장에서는 PZT같은 압전 소자와 마찬가지로 입력 전압에 대한 변형률이 선형성을 나타내는데, 사용된 PMN-PT는 PZT의 약 3배 가까운 압전 상수값을 나타내었다. 보 끝단에 외부 힘이 작용할 때 PMN-PT bimorph 구동기가 낼 수 있는 수직 방향의 힘과 변위에 대해서 일반적인 적층 형태로 이론적인 해석을 수행 하였다. 그리고 이 bimorph로 구동될 Cymbal 형태의 변위 확대 기구의 변위에 대한 이론적인 모델을 제시하고, 이를 이용하여 2개의 bimorph로 2축을 동시에 구동하는 픽업 구동기를 제작하였다. 3개의 제작된 prototype으로 실험을 수행하여 예상 변위량과 잘 일치함을 보였다. 또한, 상용 해석 프로그램인 Matlab과 Ansys를 이용하여 Cymbal 확대 기구의 여러 파라미터에 따른 구동 성능의 민감도를 확인해 보았다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2000.06a
• /
• pp.1589-1595
• /
• 2000

레이저 텍스쳐와 미케니칼 텍스쳐 컴퓨터 하드디스크의 마찰과 마코 매카니즘이 Contact Start/Stop test 실행후의 특성들에 대해 연구되었다. 다양한 분석적이고 기계적인 테스트 기술들이 이용되었다. 형상, 조도, 화학적 조성, 기계적 성질, CSS 로부터 기인된 코팅의 마찰특성들에 대해 그 변화들을 조사하였다. 즉, AFM(Atomic Force Microscopy), Nano-Indentation, Nano-Scratch, TOF-SIMS(Time of Flight Secondary Ion Mass Spectroscopy), AES(Auger Electronic Spectroscopy)등이 이 연구에 적용되었다. 레이저 텍스쳐 범프의 표면조도와 미케니칼 텍스쳐 지역의 표면조도는 각각 대략적으로 4nm 와 7nm 감소되었다. 탄성계수와 경도값은 CSS test후에 증가하였고 가장 바깥쪽의 코팅층의 변형강화가 생겨났다. 자성층과 Ni-P 층 사이에 점착성의 문제가 확인되었다. TOF-SIMS 분석은 C 와 $C_2F_5$의 세기에 있어서 감소를 드러냈고 이것은 코팅 표면에 윤활제 요소의 마모를 확실시 할수 있는 결과로 나타났다.

• Proceedings of the KSME Conference
• /
• 2000.11a
• /
• pp.159-164
• /
• 2000

In this study, the deformation analysis of 80mm optical disk holder considering the creep characteristics of plastic materials has been conducted and experimentally verified. It is very important to remedy the unrecoverable creep deformation and relaxation of holding force of an optical disk holder for the reliability of DVDR-P, DVD-ROM. A disk holder inserted in a cartridge case has been kept in the chamber with $60^{\circ}C$ temperature and 90% humidity for 24 hours. After storage test, the arm span and holding force of a disk holder have been measured after 24 hours at room temperature and normal humidity. The predicted results are in good agreement with experimentally measured one.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.314-319
• /
• 2000

The working surface of a flexible grinding disk was characterized by means of an image processing, in which a picture of a disk surface was taken by the CCD camera and analyzed with the personal computer. As process conditions, depth of cut was changed to be 2 and 4 mm. From the captured image circles marked on the disk was regenerated using the edges detected with scale space filtering. In order to correlate the level of deformation to the distortion of the circles, intervals between each circle have been analyzed. Notable correlation has been observed between the intervals and the process conditions.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 1998.04a
• /
• pp.8-8
• /
• 1998

Alloy 718은 Fe을 다량 함유하고 있어 가격이 저렴하고 엔진 작동조건에서 내열강도, 내환경성 등이 우수하여, 터빈디스크, 터빈샤프트, 터빈실, 압축기 블레이드 등에 다양하게 이용되고 있다. 이 합금은 고온에서 반복응력을 받는 부위에 대부분 사용되기 때문에 고온인장, 저주기 피로측정 등의 기계적 성질이 동시에 요구되며, 이들 특성은 단조공정변수 및 후열처리 등에 의해 크게 바뀌게 된다. 본 연구에서는 Alloy 718을 이용하여 가스터빈 디스크 제조할 경우 공정변수로서 단조온도, 변형속도 등에 의한 조직이 변화와 이에 따른 기계적 특성의 변화를 다루었다. 특히 이 합금에서 결정립크기는 고온 기계적 성질을 결정하는 중요한 변수로 작용하는데, 2단계 단조공정시 재결정에 의한 조직의 변화를 전산모사 방법에 의해 해석하고 그 결과를 조직 관찰을 통해 검증하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.13 no.7
• /
• pp.158-166
• /
• 1996

In this study, a flexible disk grinding process is applied in order to produce high precision product. A new model was developed considering feed motion along horizontal and vertical direction. Different types of feed speed variation was tested with respect to distinct process stages in order to achieve flat surface. It was observed that highest order polynomial form for both horizontal and vertical feed speed variation among the proposed categories produced surface close to flat one. Disk deflection trend during the process was visualized confirming the proposed scheme. Cutting force and VRR(volume removal rate) was observed as an aid to process planning.

• The KIPS Transactions:PartD
• /
• v.13D no.4 s.107
• /
• pp.463-476
• /
• 2006

R-trees have been traditionally optimized for the I/O performance with the disk page as the tree node. Recently, researchers have proposed cache-conscious variations of R-trees optimized for the CPU cache performance in main memory environments, where the node size is several cache lines wide and more entries are packed in a node by compressing MBR keys. However, because there is a big difference between the node sizes of two types of R-trees, disk-optimized R-trees show poor cache performance while cache-optimized R-trees exhibit poor disk performance. In this paper, we propose a cache and disk optimized R-tree, called the PR-tree (Prefetching R-tree). For the cache performance, the node size of the PR-tree is wider than a cache line, and the prefetch instruction is used to reduce the number of cache misses. For the I/O performance, the nodes of the PR-tree are fitted into one disk page. We represent the detailed analysis of cache misses for range queries, and enumerate all the reasonable in-page leaf and nonleaf node sizes, and heights of in-page trees to figure out tree parameters for best cache and I/O performance. The PR-tree that we propose achieves better cache performance than the disk-optimized R-tree: a factor of 3.5-15.1 improvement for one-by-one insertions, 6.5-15.1 improvement for deletions, 1.3-1.9 improvement for range queries, and 2.7-9.7 improvement for k-nearest neighbor queries. All experimental results do not show notable declines of the I/O performance.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.3
• /
• pp.237-251
• /
• 2013

This study aimed to estimate the axial stress and torque on a shaft in a disc cutter. The corresponding inner temperature and the surface temperature of a cutter ring were also measured by using strain gauges and thermocouples during the linear cutting tests. The maximum values of the axial stress and torque were recorded to 11.3 MPa, $171kN{\cdot}m$ respectively. They have higher correlations with normal force rather than rolling force. The results of temperature measured by thermocouples during a linear cutting test showed that the rate of increase in temperature was below $0.2^{\circ}C$. When the cutter spacing is set to be 70 mm, the inner temperature and surface temperature of a disc cutter were $0.1^{\circ}C/m$, $0.15{\sim}0.17^{\circ}C/m$ respectively. Similarly, when the cutter spacing is 90 mm, the temperature values were $0.09^{\circ}C/m$, $0.13{\sim}0.23^{\circ}C/m$ respectively.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.18 no.1
• /
• pp.31-41
• /
• 2020

We studied the anisotropic shrinkage and deformation characteristics of large size sintered bodies in the manufacturing of glass-ceramic composite wasteform. We used uranium-bearing waste, generated from the treatment of spent uranium catalyst. Sintered specimens were prepared in several forms, comprising a circular disk, and a quarter disk in several diameters of up to 40 cm. Regardless of form or size, the sintered bodies had high isotropic shrinkage when they were fabricated using green bodies prepared at 60 MPa. The average anisotropy rate and average shrinkage rate were 1.6%, and 37.4%, respectively. We confirmed that the glass-ceramic composite wasteform in a large scale disk-type for packing in a 200 L drum could be fabricated with a tolerable anisotropy shrinkage. This has resulted in a significant reduction in the volume of radioactive waste to be disposed of with highly stable wasteform.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2000.04a
• /
• pp.20-20
• /
• 2000

초음속 과소팽창 제트는 베럴충격파(Barrel shock), 팽창파(Expansion fan), 반사충격파(Reflected shocks), 마하디스크(Mach disc), 그리고 제트경계면(Exhaust-gas Jet boundary)로 이루어지는 여러 충격파 셀(Shock ceil)의 유동 형태를 나타난다. 이러한 초음속 과소팽창 제트가 수직 평판에 충돌하면 초음속 자유 제트와는 다른 변형된 유동장이 형성된다.