• Journal of the Korean Chemical Society
• /
• v.22 no.6
• /
• pp.380-385
• /
• 1978

Adsorption isotherms of o-xylene on Spheron 6, a graphitized carbon black, are obtained at various temperatures using a quartz beam microbalance. BET plots are made to estimate the molecular area of o-xylene from these isotherms. On Spheron 6, the molecular area of o-xylene (m.p $-25^{\circ}C$) remains constant until the temperature is increased up to $-15^{\circ}C$, but increases abruptly between $-15^{\circ}C$ and $-14^{\circ}C$, and then again remains constant thereafter. These results are interpreted as implying that the adsorbed o-xylene molecules are flatly localized on Spheron 6 with compact packing below $-15^{\circ}C$ while they gain a rotational degree of freedom around the benzene ring at the higher temperature.

• Journal of the Korean Chemical Society
• /
• v.16 no.6
• /
• pp.341-348
• /
• 1972

The significance of the curvature dependency correction of surface tension is studied in calculating the pore volume distribution of porous adsorbent from nitrogen adsorption isotherm. That is, Kelvin radii are calculated with curvature dependent surface tension values calculated by Chang et al, and then with these Kelvin radii, pore volume distributions of three porous adsorbents, silica alumina (steam deactivated), silica gel (Davidson 59), and silica gel (Mallinc-krodt Standard Luminescent), are calculated. The results are compared with those obtained by the previous method in which surface tension is taken as constant and also with the others. obtained by the modelless method proposed by Brunauer et al. The maximum point of the distribution curve shift to the larger pore radius, when the curvature dependency is considered. Furthermore, the relative pressure at which capillary condensation commences is by far the lower than that accepted previously. This effect becomes significant as the pore radius approaches to the micropore range.

• Korean Journal of Optics and Photonics
• /
• v.15 no.6
• /
• pp.531-538
• /
• 2004

Studies of adsorption isotherms with sharp step-wise layer condensation help us to better understanding of two dimensional layers. For this, an adsorption isotherm apparatus, using a phase modulated ellipsometric technique, has been constructed and an adsorption experiment has been performed. With subatomic scale resolution(∼0.3 $\AA$), the adsorption processes could be observed by ellipsometric signals. On measurement of multilayer adsorption of argon on highly oriented pyrolytic graphite(HOPG), thousands of adsorbed layers were observed at 34.04 K, which suggests that the adsorption is completely wet. On the contrary nine sharp layers of steps for adsorptions and desorptions were observed at 67.05 K. These isotherms obtained can provide a lot of information about thermodynamic states, bonding energies between adsobate and substrate, and structure transitions in the adsorbed film.

• Korean Chemical Engineering Research
• /
• v.50 no.1
• /
• pp.83-87
• /
• 2012

Activated carbon fiber (ACF) was used to remove four kinds of trihalomethanes(THMs) from tap water which were remained as by-products during the chlorination of water. Adsorption capacity was investigated as a function of THMs concentration and solution temperature, and adsorption mechanism was studied in relating to the surface characteristics of ACF. All the four kinds of THMs were rapidly adsorbed on the surface of ACF by physical adsorption due to the enormous surface micropores and chemical adsorption due to the hydrogen bonds, showing a Langmuir type adsorption isotherm. Langmuir type is especially profitable for the adsorption of low level adsorptives. ACF was very effective for the removal of THMs from tap water because the THMs concentration is below $30{\mu}g/L$ in tap water. The adsorption amount of THMs on ACF increased in order of the number of brom atom; chloroform, bromodichloromethane, dibromochloromethane, and bromoform. The adsorption capacity increased as increasing the number of brom atom due to the decrease of polarity in solution. The adsorption capacity of THMs on ACF can be enhanced by proper surface treatment of ACF.

• Journal of the Korean Chemical Society
• /
• v.20 no.5
• /
• pp.351-357
• /
• 1976

Adsorption isotherms of benzene and p-xylene on both of Spheron 6 (a graphitized carbon black) and Alucer (Alumina) are obtained at various temperatures using a sensitive quartz beam microbalance. From these isotherms BET plots are made to obtain the molecular areas of these adsorbates. On the Spheron 6, the molecular area of p-xylene remains constant until the temperature is increased up to $19^{circ}C$, increases abruptly at $19^{circ}C$ through $19.2^{circ}C$, and then again remains constant thereafter. On the other hand, adsorbed benzene molecules give a quite temperature-independent molecular area. The results are interpreted as the adsorbed p-xylene molecules and benzene molecules are localized on the adsorbents with compact packing, while it gains a hindered-rotational degree of freedom at the expense of vibrational one at the higher temperatures. This peculiar behavior of adsorption is considered as due to the interactions between benzene rings of adsorbents and graphite surface. Molecular areas of these adsorbates on Alucer M. A. increase gradually with temperature, indicating that the adsorbed molecules are unlocalized.

• Journal of the Korean Chemical Society
• /
• v.26 no.4
• /
• pp.211-217
• /
• 1982

Assuming krypton molecules adsorbed on the graphite surface as a two-dimensional (2D) gas, 4th virial coefficient of the virial equation is calculated by the use of cluster integrals. The Henry's law constant, and 2nd and 3rd virial coefficients are also calculated. Adsorption isotherms calculated from this virial equation agree very satisfactorily with experimental results. The interaction energy of Kr-graphite surface is calculated assuming the pairwise additivity of Lennard-Jones(12,6) potential, and parametars therein are taken as; ${\varepsilon}_{gs}$/k = 71.1 K, ${\varepsilon}_{gg}$/k = 170 K, ${\sigma}_{gs}$ = 354 pm, and ${\sigma}_{gg}$ = 368 pm.

• Korean Chemical Engineering Research
• /
• v.50 no.5
• /
• pp.885-889
• /
• 2012

In this study, amine and metal oxide additives were investigated to improve $CO_2$ adsorption capacity of activated carbons (ACs). The characteristics of surface modified ACs were studied by X-ray photoelectron spectroscopy (XPS), $N_2$ adsorption, X-ray diffraction (XRD), and BET. Amine surface treatment decreased specific surface area and pore volume of ACs, but increased alkalinity by the incorporated nitrogen functional groups. Adsorption capacities of amine functionalized ACs was larger than original ACs, because basic group which can react with $CO_2$ was grafted on the ACs surface. Presence of copper oxides on ACs also enhances the carbon dioxide adsorption. The copper oxides could increase the adsorption rate of carbon dioxides due to the acid-base interaction (or electron acceptor-donor interaction). It was found that copper oxide loading was a promising method to improve the $CO_2$ adsorption capacity of ACs.

• Korean Journal of Environmental Agriculture
• /
• v.10 no.1
• /
• pp.27-31
• /
• 1991

This study was conducted to examine the adsorption capacity of $NH_4\;^+-N$ by natural zeolite for the purpose of investigating the possibility for $NH_4\;^+-N$ eliminator of Korean natural zeolite. The dominant clay minerals of zeolite were clinoptilolite and mordenite. The reaction of $NH_4\;^+-N$ adsorption by zeolite reached equilibrium after 4hrs. The amount of $NH_4\;^+-N$ adsoption by zeolite was not significantly affected by the particle size of zeolite. The order of $NH_4\;^+-N$ adsorption by zeolite according to exchangeable cations was Na-> Ca> K-saturated zeolite. The amount of $NH_4\;^+-N$ adsorption by zeolite was increased with increasing pH of solution and the ratio of zeolite to the volume of solution. The isothermal curvel of $NH_4\;^+-N$ adsorption by zeolite was conformed to Langmuir equation.

• Korean Chemical Engineering Research
• /
• v.49 no.4
• /
• pp.456-459
• /
• 2011

Among the various activated carbons available in the market, an optimum mixing method of two kind activated carbons with different adsorbability was investigated in this study. The representative adsorption behaviors of the activated carbon are the adsorption isotherm plots obtained by the BET-Analysis which suggests also basic information of adsorption filter design. So we have tested three cases with certifications, the one was the extreme case of coal cokes based activated carbon with highest BET-model and coconut-shell based activated carbon with the lowest Langmuir-model, the other middle and cross case were applied this method to two kinds of activated carbons with higher and lower specific surface areas which are not available but supplied as research samples by an authority of an Korean Research Institute.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.25 no.3
• /
• pp.577-585
• /
• 2001

Dyeing properties of the colorants extracted from pomegranate hull on cotton fabric were investigated. Effects of dyeing conditions and mordanting on dye uptake, color change and colorfastness were explored. Cationic agent treatment was done for cotton to improve low dyeability in natural dyeing. In addition antimicrobial activity of the cotton fabrics dyed with pomegranate colorants was examined by the shake flask method. Pomegranate colorants showed low affinity to cotton fiber and its adsorption isotherm was Freundlich type. Therefore, hydrogen bonding was involved in the adsorption of pomegranate colorants onto cotton fiber. Mordants did not significantly increase dye adsorption. Pomegranate colorants produced mainly yellow color on cotton fabric. In order to improve dye uptake, cotton was cationized by treating with Cationon UK(quarterly ammonium salt) and chitosan. The cationized cotton with Cationon UK showed higher dye uptake and shorter dyeing time, compared with the untreated cotton. Chitosan treated cotton also showed high dye uptake, but chitosan was less effective compared with Cationon UK. Fastness to washing, perspiration, and rubbing was not improved by mordanting and cationizing treatment, but light fastness was increased by all mordants and cationic agent. As dye concentration increased, bacterial reduction rate was increased and mordants did not significantly increase bacterial reduction rate.