• Proceedings of the International Microelectronics And Packaging Society Conference
• /
• 2001.11a
• /
• pp.37-39
• /
• 2001

21세기의 벽두부터 국내외적으로 활발히 논의되고 있는 나노기술에 대한 정의를 생각해보는 것으로부터 우리가 나아갈 방향을 살펴보고자 한다. 나노기술이란, 원자 하나 하나 혹은 분자단위의 조작을 통해 1~100nm정도의 범위 안에서 근본적으로 새로운 물질이나 구조체를 만들어 내는 기술을 말한다. 즉 앞으로 우리는 경험해 보지 못한 새로운 현상에 대한 이해를 할 수 있어야 하고, 새로운 물질 자체를 다룰 수 있는 방법이 우리가 해야 할 구체적인 일이 될 것이란 말이 된다. 뿐만 아니라 나노기술은 종래의 정보.통신.전자 분야에서 주로 추구하던 마이크로화와 달리 재료, 기계, 전자, 의학, 약학, 에너지, 환경, 화학, 생물학, 농학, 정보, 보안기술 등 과학기술 분야 전반을 위시하여 사회분야가지 새로운 인식과 철학적인 이해가 필요하게 되었다. 21세기를 맞은 인류가 나아갈 방향을 나노세계에 대한 도전으로 보아야 하며, 과학기술의 새로운 틀을 제공할 것 임에 틀림 없다. 그러나, 이와 같은 나노기술의 출발점을 살펴보면 VLSI기술로 통칭할 수 있는 마이크로전자소자 기술이란 점이다. 국내의 VLSI기술은 메모리기술이라고 해도 과언이 아닐 것이다. 문제는 종래의 메모리기술은 대규모 투자와 집중적인 인력양성을 통해서 세계 최고 수준에 도달 할 수 있었다. 그러나 여기까지 오는 동안 사식 우리는 선진국의 뒷꽁무니를 혼신의 힘을 다해 뒤쫓아 온 결과라고 보아도 틀리지 않는다. 즉, 앞선자를 보고 뒤쫓는 사람은 갈방향과 목표가 분명하므로 최선을 다하면 따라 잡을 수 있다. 그런데 나노기술은 앞선 사람이 없다는 점이 큰 차이이다 따라서 뒷껑무니를 쫓아가는 습성을 가지고는 개척해 나갈 수 없다는 점을 깨닫지 않으면 안된다. 그런 점에서 이 시간 나노기술의 국내외 현황을 살펴보고 우리가 어떻게 할 것인가를 생각해 보는데 의미가 있을 것이다.하여 분석한 결과 기존의 제한된 RICH-DP는 실시간 서비스에 대한 처리율이 낮아지며 서비스 시간이 보장되지 못했다. 따라서 실시간 서비스에 대한 새로운 제안된 기법을 제안하고 성능 평가한 결과 기존의 RICH-DP보다 성능이 향상됨을 확인 할 수 있었다.(actual world)에서 가상 관성 세계(possible inertia would)로 변화시켜서, 완수동사의 종결점(ending point)을 현실세계에서 가상의 미래 세계로 움직이는 역할을 한다. 결과적으로, IMP는 완수동사의 닫힌 완료 관점을 현실세계에서는 열린 미완료 관점으로 변환시키되, 가상 관성 세계에서는 그대로 닫힌 관점으로 유지 시키는 효과를 가진다. 한국어와 영어의 관점 변환 구문의 차이는 각 언어의 지속부사구의 어휘 목록의 전제(presupposition)의 차이로 설명된다. 본 논문은 영어의 지속부사구는 논항의 하위간격This paper will describe the application based on this approach developed by the authors in the FLEX EXPRIT IV n$^{\circ}$EP29158 in the Work-package "Knowledge Extraction & Data mining"where the information captured from digital newspapers is extracted and reused in tourist information context.terpolation performance of CNN was relatively better than NN.콩과 자연 콩이 성분 분석에서 차이를 나타내지 않았다는 점, 네 번째. 쥐를 통한 다양섭취 실험에서 아무런 이상 반응이 없었다는 점등의 결과를 기준으로 알레르기에 대한 개별 검사 없이 안전한

• Journal of the Microelectronics and Packaging Society
• /
• v.22 no.4
• /
• pp.83-89
• /
• 2015

In this paper, we propose a fabrication technique for enhanced electrical properties of piezoelectric thick films with excellent patterning property using sol-infiltration and a direct-patterning process. To achieve the needs of high-density and direct-patterning at a low sintering temperature (< $850^{\circ}C$), a photosensitive lead zirconate titanate (PZT) solution was infiltrated into a screen-printed thick film. The direct-patterned PZT films were clearly formed on a locally screen-printed thick film, using a photomask and UV light. Because UV light is scattered in the screen-printed thick film of a porous powder-based structure, there are needs to optimize the photosensitive PZT sol infiltration process for obtaining the enhanced properties of PZT thick film. By optimizing the concentration of the photosensitive PZT sol, UV irradiation time, and solvent developing time, the hybrid films prepared with 0.35 M of PZT sol, 4 min of UV irradiation and 15 sec solvent developing time, showed a very dense with a large grain size at a low sintering temperature of $800^{\circ}C$. It also illustrated enhanced electrical properties (remnant polarization, $P_r$, and coercive field, $E_c$). The $P_r$ value was over four times higher than those of the screen-printed films. These films integrated on silicon wafer substrate could give a potential of applications in micro-sensors and -actuators.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.6 no.4
• /
• pp.95-102
• /
• 2012

The serious issue of tall building is to ensure the fire resistance of high strength concrete. Therefore, Solving methods are required to control the explosive spalling. The fire resistant finishing method is installed by applying a fire resistant material as a light-weight material to structural steel and concrete surface. This method can reduce the temperature increase of the reinforcement embedded in structural steel and concrete at high temperature due to the installation thickness control. This study is interested in identifying the effectiveness of light-weight fire protection material compounds including the inorganic admixture such as fly ash, meta-kaolin and light-weight aggregate as the fire resistant finishing materials through the analysis of fire resistance and components properties at high temperature. Also, this paper is concerned with change in microstructure and dehydration of the light-weight fire protection materials at high temperatures. The testing methods of fire protection materials in high temperature properties are make use of SEM and XRD. The study results show that the light-weight fire resistant finishing material composed of fly ash, meta-kaolin and light-weight aggregate has the thermal stability of the slight decrease of compressive strength at high temperature. These thermal stability is caused by the ceramic binding capacity induced by alkali activation reaction by the reason of the thermal analysis result not showing the decomposition of calcium hydrate. Developed light-weight fire protection materials showed good stability in high Temperatures. Thus, the results indicate that it is possible to fireproof panels, fire protection of materials.

• Applied Chemistry for Engineering
• /
• v.4 no.3
• /
• pp.616-626
• /
• 1993

Polyurethane(PU) have an excellent flexibility and toughness so that it has been widely used as an elastomer. PMMA was blended with PU to improve the impact property. Five types of PU, having different molecular weight and different polyol types, were prepared and blended with PMMA in order to investigate the effect of molecular weight and polyol type of PU on property of PU-PMMA blend. Tensile strength of PU-PMMA blend was determined by Inston. Differential Scanning Calorymetry(DSC) and Scanning. Elctron Microscopy(SEM) were used to observe morphology change and glass transition temperature changes of PU-PMMA blends. Transparency of PU-PMMA blends was determined by haze meter. But, owing to intrinsic incompatability of PU-PMMA, Low impact strength of PMMA wasn't improved through PU-PMMA blend. therefore, polyurethane dimethacrylate(PUD), having similiar chemical structure to PU and two vinyl group at both ends, was prepared and reacted with methyl methacrylate(MMA) to form crosslinked copolymer Mechanical property of this crosslinked polymer, such as impact strength and transparency, was investigated by Instron, Izod type (Cantilever beam) impact tester and haze meter. Results of these measurements showed that crosslinked copolymer of PUD-MMA was better impact resistance than PMMA and maintained similar transparency to PMMA.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.6
• /
• pp.259-265
• /
• 2011

This research was performed to stabilize heavy metals in mine tailing using fly ash and clay. Fly ash-clay-mine tailing system were investigated using XRD (X-ray diffractometer), XRF (X-ray fluorescence spectrometer), TG-DTA, SEM (Scanning Electron Microscope), Dilatometer and UTM with various mine tailing contents (~15 wt%). The fly ash used in this research was mainly composed of $SiO_2$ (33.01 wt%), $Al_2O_3$ (28.54 wt%), $K_2O$ (3.32 wt%), $Fe_2O_3$ (1.47 wt%), CaO(9.97 wt%). $SiO_2$ and $Al_2O_3$ composition of the clay was over 61 wt%. And the mine tailing have high composition of $SiO_2$ (26.91 wt%), CaO (24.25 wt%), $Fe_2O_3$ (22.97 wt%). Therefore, it was estimated that fly ash-clay-mine tailing have enough sintering characteristics. The shrinkage of specimens started at around $850^{\circ}C$ and changed little up to $1100^{\circ}C$, but increased markedly at above $1100^{\circ}C$. The shrinkage rate is strongly related to the decarbonization amount of coal fly ash. As the result of SEM, structure of the specimens with mine tailing addition showed more close than the one without mine tailing. Compressive strength of the specimens with mine tailing was highly increased to approximately 200~420 kgf/$cm^2$, it satisfied the first grade criterion for clay brick by KS L 4201. The specification of leaching characteristics of the sintered specimens were within the Korean regulation standard.

• Journal of the Korean Ceramic Society
• /
• v.40 no.5
• /
• pp.447-454
• /
• 2003

Samples were prepared by the solid-state reaction method. The nominal composition of the samples was B $i_{1.84}$P $b_{0.34}$S $r_{1.91}$C $a_{2.03}$C $u_{3.06}$ $O_{10+{delta}$ prepared from powder of B $i_2$ $O_3$, PbO, SrC $O_3$, CaC $O_3$, and CuO. They were pulverized, mixed with AgO, A $u_2$ $O_3$and MgO of 50 wt%. Finally, they were sintered at 820 to 85$0^{\circ}C$ in air. The structural characteristics, the microstructure of surface and the critical temperature with respect to the each samples were analyzed by XRD, $T_{c}$, SEM and EDS respectively. It was found that the the critical temperature of the silver oxide additive samples (99.58 K) is higher than those of gold or magnesium oxides additive samples, but all those values are lower than that of pure Bi-2223 phase. The microstructure of surface showed the tendency which the AgO additive samples become more minuteness than A $u_2$ $O_3$ and MgO additive samples.s.samples.s.

• Journal of the Korea Institute of Building Construction
• /
• v.10 no.4
• /
• pp.11-20
• /
• 2010

This study carried out a Mock-up test to apply Low-heat Cement (CF) that is adjusted to a fineness of $3,000\;{\pm}\;200\;cm^2/g$ by substituting Coarse particle Cement (CC) and fly ash with ordinary Portland Cement (OPC), then applied it on-site. The result of the test is as follows. The Mock-up test showed that the amount of admixture in CF increased SP agent and AE agent slightly more compared to OPC, while temperature history showed that the highest temperature of CF was around $6{\sim}10^{\circ}C$ lower than that of OPC. Compressive strength in CF was low compared to that of OPC, but the strength width became narrow at the age of 28 days, which is not considered to be significant. In on-site application, slump, air content and chloride content all satisfied the target values, while the temperature history showed that the highest temperature in the center by each cast was about $34^{\circ}C$ in the first cast, $42^{\circ}C$ in the second cast, and $39^{\circ}C$ in the third cast. Compressive strength of specimen for strut management showed low value compared to standard curing, but its strength was reduced at the age of 28 days.

• Applied Chemistry for Engineering
• /
• v.10 no.1
• /
• pp.105-111
• /
• 1999

When the preparation method of iron silicide films possess the annealing process, the interfacial state of the films is not fine. The good quality films were obtained as the plasma was used without annealing processing. Since the injected precursors were various active species in the plasma state, the organic compound was contained in the prepared films. We confirmed the formation of Fe-Si bonds as well as the organic compound by Fe and Si vibration mode in Raman scattering spectrum at $250cm^{-1}$ and Ft-IR. Because of epitaxy growth being progressed by the high energy of plasma at the low temperature of substrate, iron silicide was epitaxially grown to ${\beta}$-phase that had lattice structure such as [220]/[202] and [115]. Band gap of the prepared films had value of 1.182~1.174 eV and optical gap energy was shown value of 3.4~3.7 eV. The Urbach tail and the sub-band-gap absorptions were appeared by organic compound in films. We knew that the prepared films by plasma were obtained a good quality films because of being grown single crystal.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.23 no.4
• /
• pp.375-384
• /
• 2005

Three dimensional urban models are being increasingly applied for various purposes such as city planning, telecommunication cell planning, traffic analysis, environmental monitoring and disaster management. In recent years, technologies from CAD and GIS are being merged to find optimal solutions in three dimensional modeling of urban buildings. These solutions include modeling of the interior building space as well as its exterior shape visualization. Research and development effort in this area has been performed by scientists and engineers from Computer Graphics, CAD and GIS. Computer Graphics and CAD focussed on precise and efficient visualization, where as GIS emphasized on topology and spatial analysis. Complementary research effort is required for an effective model to serve both visualization and spatial analysis purposes. This study presents an efficient way of using the CAD plans included in the building register documents to reconstruct the internal space of buildings. Topological information was built in the geospatial database and merged with the geometric information of CAD plans. as well as other attributal data from the building register. The GIS network modeling method introduced in this study is expected to enable an effective 3 dimensional spatial analysis of building interior which is developing with increasing complexity and size.

• Korean Journal of Food Science and Technology
• /
• v.39 no.2
• /
• pp.146-151
• /
• 2007

Resistant starch (RS) content, paste viscosity, water solubility and absorption index, bulk density, color, compression force, and bowl life of Goami flakes manufactured by extrusion process were determined to evaluate Goami (high fiber rice) as a food material. Various extrusion process conditions included barrel temperature (90, 110, $130^{\circ}C$) and moisture content (50, 55%). RS content in the extruded pellet and defatted flake ranged from $8.00{\sim}8.56%$ and $6.57{\sim}9.53%$ respectively. RS content increased as moisture increased from 50% to 55%. Peak viscosity, trough viscosity, final viscosity, and setback viscosity of the extruded pellet and defatted flake decreased with steeping for 1 hr, and the breakdown viscosity significantly increased. The water solubility and absorption index increased in the flake compared to Goami and extruded pellet. The water solubility index of the extruded pellet was lower than that of Goami, while its water absorption index was higher than Goami. The bulk density of the flake ranged from $0.35{\sim}0.44$ g/mL. The bowl life of the flake was $12.4{\sim}19.4$ min, which was longer than commercial breakfast cereals on the market.