• Journal of KSNVE
• /
• v.9 no.3
• /
• pp.517-524
• /
• 1999

Mathematical formulas for multi-dimensional isolation analysis via vibrational power transmission can be derived in a rather simple form when the wave effects of the isolators are completely neglected. With increase of frequency range of interest, however, the wave effects play a very important role and hence cannot be neglected. The formulas get involved accordingly. In this study, a method of equivalent stiffness modeling of the isolators to include the wave effects is proposed in such a way that not only the complexity of the mathematical expressions but also that of experiments of necessity can be reduced. This method is illustratively applied to a two-dimensional vibration isolation system with nonrigid source and base structures.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2011.10a
• /
• pp.643-648
• /
• 2011

This paper deals with the ESM(equivalent source method) with the continuation of acoustic near-field for NAH(near-field acoustic holography) to overcome the finite measurement aperture effect and reconstruct the normal velocity on an arbitrarily shaped structure surface. The continuation method is an extension of the measured sound field into a region outside and is based on the Green's function relating acoustic quantities on the two conformal surfaces. This algorithm is not limited to planar surfaces and can be applied to arbitrarily shaped surfaces. The ESM is an alternative approach of BEM-based NAH for the reconstruction on a general structure. In ESM the acoustic field is represented by a set of point sources located over a surface that is close to the structure surface. The simulation results of this study shows that the reconstruction error of particle velocity on the source surface is 11% and 16% for planar and cylindrical sources separately.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.16 no.5 s.110
• /
• pp.452-456
• /
• 2006

The critical speeds and mode shapes are most important to determine the behaviors of rotor in designing rotating machinery. As the capacity and span of turbine-generator increases, the turbine-generator system is composed of many components such as bearings, pedestal, turbine and hood and so on. Also, it is getting flexible and has many critical speeds. Especially, as the characteristics of bearing-pedestal are very complicated, they affect the entire vibration characteristics of turbine-generator system. In this paper, it is observed how to determine the equivalent dynamic stiffness of bearing-pedestal by analytical and experimental method.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2012.10a
• /
• pp.516-519
• /
• 2012

This study proposes a method of an equivalent bell model in order to tune the beat period of a Korean bell. In a Korean bell having a slight asymmetry, each circumferential mode splits into a mode pair which has a slight difference in frequency, and the interaction of the mode pair makes a beat in vibration and sound. An equivalent bell model which consists of an axi-symmetric bell and an equivalent point mass, has the same mode property as in a real bell. The equivalent bell model is constructed by the finite element analysis based upon the theory of a revolutionary shell Using the equivalent bell model, the beat period is predicted when the bell thickness is locally decreased to improve the beat property. The predicted result is verified by experiment on a test bell. The proposed method is useful to save the time required for tuning the beat period of a large bell.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.20 no.4
• /
• pp.355-360
• /
• 2010

In this study, a modeling process of a 3-axis planar alignment stage is suggested. Vibration tests using a laser vibro-meter is performed to find the modeling parameters of the stage. By analyzing the result of the test, the stiffness of prismatic joints and revolute joints, as well as the contact conditions of the thrust bearings, can be calculated. The modeling of the stage was validated by comparing six normal mode shapes, which are acquired from experiments and simulations.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.854-855
• /
• 2013

As an unique acoustic characteristic of a Korean bell. beat phenomenon is a periodic repetition of strong and weak sounds. Beat sounds good when it is clear and it has a proper period, however, it is not easy to satisfy these two conditions simultaneously. In this study, we propose a beat tuning method to satisfy these two conditions, by using an equivalent bell model. First, we construct an equivalent bell which has the same beat property with the 1st beat of a real bell and we investigate the change of mode pair by finite element analysis, when thickness of the bell is locally decreased at $22.5^{\circ}$ from the striking point. From the analysis result, minimum thickness reduction amount is determined to make a clear and strong beat.

• Journal of KSNVE
• /
• v.10 no.1
• /
• pp.153-159
• /
• 2000

This paper presents a new method for including the dynamic stiffness of the stationary parts in rotordynamic analysis. As a consequence of the support dynamics, critical speeds are varied and/or additional critical speeds are introduced. Therefore, dynamic effects of the support are often significant in high speed turbomachinery, but most of analysis has considered the support as a rigid body or a simple structure. The proposed method is based on the coupled characteristics of the driving point and transfer frequency response functions of the support system to model the equivalent spring-mass series in finite element analysis. To demonstrate the applicability of the simulation procedures provided, it is applied to the rotor model of the double suction centrifugal pump. Results of the suggested equivalent-support rotor model including coupled effects agree well with the entire pump model.

• Journal of KSNVE
• /
• v.6 no.6
• /
• pp.692-700
• /
• 1996

소음원의 특성을 규명하는 방법론들을 각각 맵핑의 개념으로 통합하여 살펴 보았다. 방위각 추정 방법론에 근간을 둔 소음원 위치 탐지 방법과 같이 소음원의 등가 단극음원 크기 및 위치들을 추정하는 기본적인 방법들로 부터 보다 많은 계측 기기 및 탐촉자와 함께 상당히 정교한 데이터 처리를 수행하여야 하는 인텐시티를 이용한 음장 맵핑(mapping) 홀로그래피를 이용한 관심음장 전체의 3차원 맵핑 등 실로 다양한 방법을 관찰하였다. 결국은 가장 많은 탐촉자를 사용하는 측정 시스템이 보다 많은 음장의 정보를 제공하므로서 가장 탁월한 방법론이라 할 수 있다는 지극히 자연 스러운 결론을 낼 수 있다. 이것은 특히 탐촉자 자체의 가격이 저렴해져 가는 추세인 점과 소형화하는 추세를 감안하여 봄과 동시에 공간상의 물리적인 의미 즉 파수영역에 대한 보다 폭 넓은 이해를 통한 시간, 공간, 주파수, 파수영역 즉 확대된 차원에서의 음장, 소음에 대한 이해를 갖을 수 있다는 면에서 또다른 가치를 부여할 수 있는 것이다.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1996.10a
• /
• pp.43-49
• /
• 1996

소음원의 특성을 규명하는 방법론들은 방위각 추정 방법론에 근간을 둔 소음원 위치 탐지 방법과 같이 소음원의 등가 단극음원 크기 및 위치들을 추정하는 기본적인 방법들로부터 보다 많은 계측기기 및 탐촉자와 함께 상당히 정교한 데이타 처리를 수행하여야 하는 인텐시티를 이용한 음장 맵핑(mapping) 홀로그라프를 이용한 관심음장 전체의 3차원 맵핑등 실로 다양하다 할 수 있다. 결국은 가장 많은 탐촉자를 사용하는 측정 시스템이 보다 많은 음장의 정보를 제공하므로서 가장 탁월한 방법론이라 결정할 수 있다. 이것은 특히 탐촉자 자체의 가격이 저렴해져 가는 추세인 점과 소형화하는 추세를 감안하여 봄과 동시에 공간상의 물리적인 의미 즉 파수영역에 대한 보다 폭 넓은 이해를 통한 시간, 공간, 주파수, 파수영역 즉 확대된 차원에서의 음장, 소음에 대한 이해를 갖을 수 있다는 면에서도 가치 있다고 할 수 있다.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.5 s.98
• /
• pp.511-518
• /
• 2005

The railroad noise has been considered as one of environment pollution and complaints about it have been increasing every year. Therefore, the establishment of railroad noise monitoring network is necessary. It will be designed for monitoring railroad noise, storing data of railroad noise continuously and providing the fundamental knowledge for the measures of railroad noise. For this, we investigated the actual condition and status of railroad noise according to distance around Daejeon, Daegu, Gwangju, and Busan. This paper shows the basic data that will be used for predicting the noise level near railroad in the environmental impact assessment.