• Journal of the Korean Society for Nondestructive Testing
• /
• v.16 no.1
• /
• pp.19-28
• /
• 1996

This study has investigated the optimization of NDT method and the minimum detectable defect size for complex structures such as the solid propellant rocket motor using real time X-ray imaging system. Test specimens were made of steel plates with various defect size, and installed with proper thickness for which solid propellant, rubber, and case converted to the steel equivalent thickness according to the radiographic equivalent theory. As the results, this examination obtained optimum magnification and X-ray energy, dose rate according to steel equivalent thickness, also, obtained the relationship between minimum detectable defect size and the ratio(defect depot/object thickness). Thus, this simulated test is the preliminary procedure before performing NDT for real objects, and is possibly applied for NDT of other complex structures.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.141-144
• /
• 2004

수중 음향 탐지 시스템에서 빔 형성 기법은 오랫동안 많은 연구자들에 의해 연구되어 왔다. 빔 형성 기법은 탐지성능에 직결되기 때문에 최적의 빔 설계는 중요한 문제가 된다. 그리고 최적의 빔 형성기를 구현하기 위해서는 개별 센서에 대한 가중회로의 구성이 필수적이며, 가중회로를 구성하기 위해서는 개별 센서에 대한 등가회로 모델링과 정합회로 설계가 필수적이다. 이전의 연구에서는 센서 등가회로 모델링 Tool과 정합회로 디자인 Tool 각각의 구성과 사용방법에 대해서 소개하였다. 본 논문에서는 이 두 가지 Tool을 모두 이용하여 센서 등가회로 및 정합회로를 모델링하였고, 이를 바탕으로 실제 가중회로를 구현하였다. 실험을 위해 물-공기의 상사효과를 가정하였으며, 공기 중에서 스피커 어레이를 이용하여 빔 형성을 하였다. 또한, 이론치와 실험치를 비교하여 BeamCAD, 센서 등가회로 모델링 Tool 그리고 정합회로 디자인 Tool로 이루어진 소나 센서 디자인 Tool의 타당성을 검증하였다.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.463-466
• /
• 2004

수중 음향 탐지 시스템에서 빔 형성 기법은 오랫동안 많은 연구자들에 의해 연구되어 왔다. 빔 형성 기법은 탐지성능에 직결되기 때문에 최적의 빔 설계는 중요한 문제가 된다. 그리고 최적의 빔 형성기를 구현하기 위해서는 개별 센서에 대한 가중회로의 구성이 필수적이며, 가중회로를 구성하기 위해서는 개별 센서에 대한 등가회로 모델링과 정합회로 설계가 필수적이다. 이전의 연구에서는 센서 등가회로 모델링 Tool과 정합회로 디자인 Tool 각각의 구성과 사용방법에 대해서 소개하였다. 이 두 가지 Tool을 모두 이용하여 센서 등가회로 및 정합회로를 모델링하였고, 이를 바탕으로 실제 가중회로를 구현하였다. 가중회로는 정합회로와 트랜스포머로 구성된다. 본 논문에서는 이와같이 구성된 가중회로와 스케일 모델에 맞게 제작된 스피커 어레이를 이용하여 빔형성 실험을 하였으며, 그 결과를 이론치와 비교하였다. 이것을 바탕으로 BeamCAD, 센서 등가회로 모델링 Tool 그리고 정합회로 디자인 Tool로 이루어진 소나 센서 디자인 Tool의 타당성을 검증하였다.

• Composites Research
• /
• v.29 no.6
• /
• pp.347-352
• /
• 2016

This work presents the free vibration characteristics of laminated composite corrugated rectangular plates using the analytical method. Because it is very difficult to determine its mechanical behavior of 3-dimensional corrugated structures analytically, the equivalent homogenization model is adapted to investigate the overall mechanical behavior of corrugated structures. The corrugated element can be homogenized as an orthotropic material. Both the effective extensional and flexural stiffness of this homogenized equivalent orthotropic material are considered in the analysis. The present analytical results are validated by those obtained from 3D finite element analysis based on shell elements. The natural frequencies and global vibration mode shapes obtained from present analytical and finite element analysis are presented. Some numerical results are presented to check the effect of the geometric properties.

• Composites Research
• /
• v.13 no.6
• /
• pp.63-72
• /
• 2000

In this paper, statistical treatments of effective properties for plain weave textile composites were presented. Configurations up to 32 layers with varied stacking phase shifts were considered. Effective properties were calculated by numerical simulation in which uni-axial tensile and shear load were applied at unit cell. Sample analysis was utilized to consider the inherent randomness in the phase shift and the results were treated statistically. It was found that effective properties were dependent on stacking phase shifts for thin plain weave textile composites. The distribution of $E_{xx}$ and $V_{xy}$ were skewed and the range of possible values was relatively large. As the number of layers increased, however, the distribution width became narrower and mean values converged. In contrast, $G_{xy}$ was not affected by phase shifts and thickness changes.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.3
• /
• pp.6-21
• /
• 2008

We have investigated the effect of the forward and reverse ESD pulse accumulation on the development of the oxide VCSEL's electrical and optical characteristics. The forward ESD-induced degradation is complicated, showing three degradation phases with increasing ESD voltage while the reverse ESD-induced degradation is divided by a sudden distinctive change in elecorl-optical characteristics. By comparing the measured L-I-V characteristics and their derivatives with the fitted characteristics using an equivalent circuit model as well as the large signal circuit model, the development of the oxide VCSEL's electro-optical characteristics under forward and reverse ESD conditions has been fully understood.

• Electrical & Electronic Materials
• /
• v.3 no.4
• /
• pp.315-324
• /
• 1990

저저항(DuPont 1721, 100.OMEGA./sq.)과 고저항(1741, 10K.OMEGA./sq.)의 두 Ru계 후막저항체를 여러 조건에서 소결하여 소결막의 복소임피던스 특성과 임피던스의 주파수의존성을 1KHz-13MHz의 주파수 범위에서 조사하였다. 저저항 1721계의 경우 600.deg.C이상에서 소결한 모든 시편이 거의 저항성분(R)만으로 구성된 등가회로에 해당되는 복소임피던스 거동을 보였으며 임피던스에 미치는 주파수 의존성은 크게 나타나지 않았는데 5KHz까지는 주파수에 따라 변화가 없다가 그 이상의 주파수에서 주파수 증가에 따라 약간씩 증가하였다. 고저항 1741 후막저항체의 경우는 소결조건에 따라 복소임피던스 거동과 임피던스에 미치는 주파수 의존성이 달리 나타났다. 600.deg.C에서는 용량(C) 성분만으로 구성된 등가회로에 해당하는 복소임피던스 거동을 얻었고 주파수 증가에 따라 임피던스가 직선적으로 감소하였으며 700.deg.C이상 900.deg.C까지는 저항(R)과 용량(C)이 병렬로 연결되는 형태의 등가회로에 해당하는 복소임피던스 거동을 얻었고 이때의 임피던스의 주파수 의존성은 저주파수 영역에서는 임피던스가 주파수에 변함없이 일정하다가 5KHz이상의 주파수에서는 주파수 증가에 따라 임피던스가 직선적으로 감소하였다. 1000.deg.C반응에서의 복소임피던스 거동은 RCL성분이 병렬로 연결된 형태의 등가회로에 해당되는 결과를 얻었으며 임피던스도 작아지고 주차수 의존성도 현저하지 않았다.

• The Journal of the Acoustical Society of Korea
• /
• v.27 no.7
• /
• pp.365-371
• /
• 2008

In this study, beat control method using an equivalent ring model is proposed to control beat period of a slightly asymmetric ring. Slight asymmetry in a ring generates mode pair and the interaction of the mode pair makes beat in vibration and sound. In a ring, as a simplified bell type structure, mode data are measured and an equivalent ring is determined so that the measured mode condition is satisfied. By the finite element analysis on the equivalent ring, changes of mode pair condition are predicted when local mass is attached or the local thickness is decreased. The predicted results are compared with the experimental result and the validity of the proposed method is verified.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.8
• /
• pp.899-904
• /
• 2014

Thickness profiled blank is designed using optimization techniques for maximizing the bulged heights during the free bulging of Inconel 718. The thickness of the blank was described by the Bezier curve and the locations of the control points were used as the design variables for optimization. The maximization of the bulged heights within the limited strain range served as the objective function and constraints for optimization. The equivalent static loads method for non-linear static response structural optimization (ESLSO) was used and the result of the optimization revealed 22 increased bulged heights. A free bulging test using a blank with an optimized profile was conducted to verify the optimization process. The results were compared with those of numerical analysis in terms of bulged height and deformed shape.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.7C
• /
• pp.562-568
• /
• 2008

This paper proposes the scheme which obtain the coefficients of TDL filter and two normalization algorithms among methods which get solution of equivalent Wiener-Hopf Equation in Gram-Schmidt algorithm. Compared to the conventional NLMS algorithm, normalizes with sum of power of inputs, the presented algorithms normalize using sums of eigenvalues. Using computer simulation, we perform an system identification in an unstable environment where two poles are located in near position outside unit circle. Consequently, the proposed algorithms get the coefficients of TDL filter in Gram-Schmidt algorithm recursively and show better convergence performance than conventional NLMS algorithm.