• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.19 no.2 s.72
• /
• pp.187-194
• /
• 2006

Generally, earthquake-resistant structural systems have to ensure the sufficient stiffness and ductility for stability In this paper, the spatial structures are applied an isolation system to boundary parts between roof systems and sub-structures. So, it is necessary to examine the characteristics of dynamic behaviors of spatial structures governed by higher modes rather than lower modes different from the cases of high-rise buildings. The objectives of this paper are to develop the equivalent lumped mass model to simplify an analytical processes and to investigate the dynamic behaviors of roof systems according to the mass and stiffness of sub-structures as a fundamental study of performance design for the spatial structures.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.12
• /
• pp.49-57
• /
• 2001

In this paper, equivalent circuit model and novel model parameter extraction method of a silicon(Si) substrate are presented. Substrate coupling through Si-substrate is quantitatively investigated by analyzing equivalent circuit with operating frequency and characteristic frequencies (i.e., pole and zero frequency) of a system. For the experimental verification of the equivalent circuit and parameter extraction method, test patterns are designed and fabricated in standard CMOS technology with various isolation distances, substrate resistivity, and guard-ring structures. Then, these are measured in l00MHz-20GHz frequency range by using vector network analyzer. It is shown that the equivalent-circuit-based HSPICE simulation results using extracted parameters have excellent agreement with the experimental results. Thus, the proposed equivalent circuit and parameter extraction methodology can be usefully employed in mixed-signal circuit design and verification of a circuit performance.

• Magazine of the Korea Concrete Institute
• /
• v.6 no.2
• /
• pp.148-158
• /
• 1994

The goal of this study is to develop an equivalent fatigue load model for prestressed concrete composite girder bridges in Korea. To meet this goal, the probabilistic characteristics of traffics which cause fatigue damage in bridges are properly modeled. An equivalent fatigue load inodel for prestressed concrete composite girder bridges with constant. amplitude and frequency is established. The model proposed in this paper is very simple to use and gives fairly good results.

• Proceedings of the KIEE Conference
• /
• 2006.10a
• /
• pp.139-140
• /
• 2006

본 논문에서는 4포트 마이크로스트립 인터커넥트에 대한 새로운 등가모델을 제시하였다. 제시된 방법에서는 마이크로스트립 인터커넥트 중 선로의 방향이 변하는 부분에서 등가회로 파라미터인 커페시터 성분을 모델화하여 최적화 과정을 통해 값을 추출하였고, 시뮬레이션 결과와 측정치를 비교함으로써 등가회로모델의 유효성을 확인하였다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.10 no.2
• /
• pp.169-176
• /
• 2005

In this paper, a DC and small-signal AC modeling for the active-clamp, ful1-bridge boost converter is described. Based on the operation principle, the ac part of the converter can be replaced by a dc counterpart. Then, a conceptual equivalent circuit is derived by rearranging the switches. The equivalent circuit for this converter consists of CCM(Continuous conduction mode) boost and DCM(Discontinuous conduction mode) buck converter. The analyses for the equivalent CCM boost and DCM buck converter are done using the model of PWM switch. The theoretical modeling results are confirmed through experiment or SIMPLIS simulation.

• Geophysics and Geophysical Exploration
• /
• v.17 no.4
• /
• pp.242-246
• /
• 2014

Spectral induced polarization (SIP) is a useful technique, which uses electrochemical properties, for exploration of metallic sulfide minerals. Equivalent circuit analysis is commonly conducted to calculate IP parameters from SIP data. An equivalent circuit model, which indicates the SIP response of rock, has a non-uniqueness problem. For this reason, it is very important to select the proper model for accurate analysis. Thus, this study focused on suggesting a new model, which suitable for the analysis of an anomalous SIP response, such as ore. A suitability of the new model was verified by comparing it with the existing Dias model and Cole-Cole models. Analysis errors were represented as a normalized root mean square error (NRMSE). The analysis result using the Dias model was the NRMSE of 10.50% and was the NRMSE using the Cole-Cole model of 17.03%. Howerver, because the NRMSE of the new model is 0.87%, it is considered that the new model is more useful for analyzing the anomalous SIP data than other models.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.213-216
• /
• 2004

본 연구에서는 복잡한 형상을 가진 음원으로부터 방사하는 음장을 등가음원법 (equivalent source method)을 이용하여 재구성한다. 일반적인 등가음원법의 기본 원리는 진동하는 물체의 표면 또는 내부에 등가음원을 분포시켜서 등가음원의 강도를 계산하는 방법이다. 각 등가음원의 강도는 음원의 경계 조건이나 측정된 음장 음압을 통해서 구할 수가 있으며 사용된 등가음원의 차수, 개수 그리고 위치 등은 고려되어야 할 중요한 변수들이다. 기존의 HELS (Helmholtz equation least square) 방법은 한 곳의 위치에 다양한 차수로 이루어진 등가음원을 사용하여 각 차수의 계수를 구하는 방법으로써 구형에 가까운 음원에 대해서 좋은 결과를 보이나 음장의 결과가 최대 차수의 선택에 따라서 큰 오차를 유발하는 문제점이 있다. 따라서 정규화 기법을 사용하여 음장을 재구성하기 위해 필요한 등가음원의 최적 차수를 구하고, 음원 내부에 최적 차수로 이루어진 등가음원을 여러 개의 점에 위치시켜서 재구성 정확도를 향상시켰다. 정규화된 등가음원법의 타당성 검증을 위하여 표면 일부가 진동하는 구에 대한 수치 해석 및 청소기 모델에 대한 음장 재구성 실험 을 수행하였다.

• Journal of the Korean Society for Railway
• /
• v.11 no.5
• /
• pp.465-470
• /
• 2008

Sound transmission characteristics are investigated on the honeycomb panels used for railway vehicles. Equivalent orthotropic plate model and equivalent mass law are applied to predict the sound transmission loss (STL) of the honeycomb panels. The predicted values of the STL are compared with the measured values. The reliability and the limitation of the prediction models are investigated. Coincidence effect and local resonance effect on STL are considered. The result of the study shows that the equivalent orthotropic plate model can be used as a good prediction model, if the local resonance frequency is properly applied. finally, ways to improve the severe STL drop by local resonance are proposed and the effect on the sound insulation performance is analysed.

• Proceedings of the KIPE Conference
• /
• 2014.11a
• /
• pp.56-57
• /
• 2014

본 논문에서는 $LiCoO_2$ 원통형(cylindrical)셀을 확장칼만필터(extended Kalman filter; EKF) 추정알고리즘에 적용 시 등가회로모델 차이에 따른 SOC(State-of-charge) 추정성능의 비교 분석을 진행하였다. 첫 번째, 등가회로 모델의 성능을 좌우하는 RC-ladder의 개수에 따른 SOC 추정성능의 차이를 비교하였고, 두 번째, 모델 단순화에 따른 불가피한 모델의 에러를 줄이고자 사용되는 노이즈 모델(noise model) 및 데이터 리젝션(data rejection)의 유무에 따른 SOC 추정성능을 비교분석 하였다.

• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.135-136
• /
• 2018

배터리의 내부 파라미터는 외부환경 및 동작 영역에 따라 가변적인 특성이 존재한다. 이에 따라 배터리 모델의 추정성능이 결정된다. 본 논문에서는 두 개의 RC-ladder 전기적 등가회로 모델링을 이용하여 휴지구간, 방전구간 및 휴지구간에서 방정식 기반으로 추출한 파라미터의 비교 분석을 실시하고, 등가회로 모델기반으로 검증을 실시하였다.