• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.374-381
• /
• 2000

본 논문에서는 지진 발생시, LRB가 설치된 교량의 시간이력 해석을 수행하였다 이를 위해 LRB의 비선형 거동특성을 Bi-linear로 모형화 하였으며, 기존의 방법인 등가선형으로 모형화된 해석결과와 비교하였다. 또한 LRB받침만 설치된 경우와, LRB받침과 일반탄성받침이 함께 사용된 경우를 해석하여, 받침이 혼합된 경우, 상시하중과 지진하중시 발생할 수 있는 문제점을 검토하였다. 4경간 연속교량에 적용된 해석결과를 보면, LRB만을 설치한 경우, Pot-Bearing만 설치된 경우에 .비해, 고유주기 상승과 이력감쇠에 의한 지진력의 감소와 함께, 지진력의 효과적인 분배를 볼 수 있었으며, 일반탄성받침과의 적절한 조합에 의해서도, 충분한 면진성능을 얻을 수 있었다. 또한 LRB의 등가선형 모델이 Bi-linear 모델에 비해 보수적인 해석결과를 나타내었다.

• Journal of the Korean Geotechnical Society
• /
• v.16 no.5
• /
• pp.5-17
• /
• 2000

등가선형이론을 이용한 지진응답해석은 사용의 간편함 때문에 많이 사용되고 있지만, 대부분의 입력 정수들이 경험식에 의해 얻어지고 있어 심각한 오류를 발생시킬 여지가 있다. 입력정수를 실험의 결과로부터 얻을수 없다면 합리적인 방법을 통하여 입력 정수를 결정하여야 하며, 또한 입력 정수들이 해석결과에 어떠한 영향을 미치는지에 대한 고찰이 필요하다. 따라서 본 연구에서는 입력정수가 해석결과에 미치는 영향에 대한 민감도 분석을 실시하였다. 해석은 등가선형화 이론에 기초하여 개발한 액상화 해석프로그램(KLIq)을 이용하였다. 검토된 사항은 전단탄성계수와 감쇠비의 영향, 변형률의 영향, 반복계산에서 유효변형률 결정방법, 최대전자탄성계수의 영향, 변형률 의존곡선(자반의 종류)의 영향, 입력 지질파의 영향 등이다.

• Journal of Power System Engineering
• /
• v.1 no.1
• /
• pp.98-105
• /
• 1997

In general, crankshafts which are used in internal combustion reciprocating engines are subjects to high torsional vibration. Therefore, a damper is often used to minimize the torsional vibration in reciprocating engines. In this paper, in order to investigate damping performance of viscous damper, the real effective viscosity and complex damping coefficient of silicone oil, and the effective inertia moment of inertia ring are calculated considering the relative motion between damper casing and inertia ring. Based on these results multi-cylinder shaft is modeled into equivalent 2-degree of freedom system and optimum condition is estimated by calculating the amplification factor of viscous damper. Also the test damper was manufactured according to the result of theoretical investigation, the performance and durability was ascertained through experimental examination.

• The Journal of the Acoustical Society of Korea
• /
• v.12 no.4
• /
• pp.39-46
• /
• 1993

조화집중이동하중을 받는 무한보에서의 음향방사에 대한 연구는 선박, 비행기, 타이어 트레드 밴느 등과 같은 계의 설계시 계의 구조물로부터 발생하는 소음에 대한 해결방안을 제시해 준다. 구조물 표면에 발생하는 음향파워는 svktnqusghks방법을 이용하여 보의 전길이에 분포된 음향 인텐시티를 적분하여 구한다. 보의 표면에서 발생하는 음향파원는 미하수, 장력, 감쇠계수, 기초강성계수, 그리고 파수비에 의해서 결정된다. 각 인자에 따른 음향파워에 대한 정성적인 분석을 수행하기 위해 심프슨 적분방법을 이용하여 수치적분을 하였다. 무한보에 작용하는 유체하중에 3다라 진동에너지가 음향에너지로 변환되는 비율이 달라진다. 밀도가 큰 유체는 등가감쇠로 작용하여 보로부터 방사된 음향에너지는 빠르게 감소된다. 하중의 이동에 의하여 도플러이동효과가 발생하여 무한보의 공진부근에서의 음향파워 파크가 분리되고 보의 기초감쇠의 영향으로 음향에너지는 감소된다.

• Journal of KSNVE
• /
• v.9 no.2
• /
• pp.258-264
• /
• 1999

The purpose of this paper is to investigate the damping behavior of a flexible joint. The slip at a structrual joint is selected at the tips of two identical cantilever beams adjoining each other. Both the direction of normal force and its magnitude varies due to the global deformation of the structure from mode to mode in the friction model. The friction dependent on vibration displacements resultsin the same functional behavior of the hysteretic material damping. Linearized energy loss factors are obtained as functions of both linear and torsional spring stiffness for their groups of symmetric and anti-symmetric modes, respectively. Experimental measurements as made for comparisons with analytical estimations by controlling the magnitude of fastening torque in the fastener, Hi-Lite. Trends on damping levelsmeasured in a very common vibration test method make an excellent agreement on the estimated damping levels.

• Journal of the Korean GEO-environmental Society
• /
• v.11 no.6
• /
• pp.5-20
• /
• 2010

One-dimensional equivalent linear site response analysis is widely used in practice due to its simplicity, requiring only few input parameters, and low computational cost. The main limitation of the procedure is that it is essentially a linear method, in which the time dependent change in the soil properties cannot be modeled and constant values of shear modulus and damping is used throughout the duration of the analysis. Various forms of modified equivalent linear analyses have been developed to enhance the accuracy of the equivalent linear method by incorporating the dependence of the shear strain with the loading frequency. The methods are identical in that it uses the shear strain Fourier spectrum as the backbone of the analysis, but differ in the method in which the strain Fourier spectrum is smoothed. This study used two domestically measured soil profiles to perform a series of nonlinear, equivalent linear, and modified equivalent linear site response analyses to verify the accuracy of two modified procedures. The results of the analyses indicate that the modified equivalent linear analysis can highly overestimate the amplification of the high frequency components of the ground motion. The degree of overestimation is dependent on the characteristics of the input ground motion. Use of a motion rich in high frequency contents can result in unrealistic response.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2002.03a
• /
• pp.359-366
• /
• 2002

Direct Integration method(D.I) and Mode Superposition method(M.S) are used widely in dynamic analysis method for structure with isolation devices. D.I is used firstly because it is consider to nonlinearity of isolation device. M.S is applied in elastic region, but it is difficult to apply M.S because coincidence with othogonality condition in the case of adding the damping of isolation device. In this study, the method for calculation of damping ratio of isolated structure is proposed, and proposed method is verified with analysis for example structure.

• 한국방재학회:학술대회논문집
• /
• 2007.02a
• /
• pp.551-554
• /
• 2007

본 연구의 목적은 현재 지반지진공학에서 가장 큰 문제점 중 하나로 대두한 동하중의 주파수에 비례하는 흙의 거동이 지반진동에 미치는 영향을 규명 하는데 있다. 이를 위해 주파수의 영향을 고려하여 지반거동을 모사할 수 있는 지반진동해석 프로그램을 제시하고자 한다. 이 프로그램은 주파수에 비례하는 흙의 전단탄성계수 및 감쇠비를 모두 고려할 수 있는 새로운 해석기법이 될 것이다. 이를 이용하여 주파수에 비례하는 흙의 거동이 지반진동에 미치는 영향을 심도 있게 연구하고자 한다.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.6 no.4
• /
• pp.39-49
• /
• 2002

In this paper, the characteristics of RB(rubber bearing) were studied by various prototype tests on RB with low hardness rubber. The characteristics of RB were tested on displacements, repeated cycles, frequencies, vertical pressures, temperature, vertical stiffness and the capability of shear deformation. The prototype test showed that the displacement and vertical pressures were the most governing factors influencing on characteristics of RB. The effective stiffness and equivalent damping of RB showed small increment in high frequency range. After the repeated cyclic test with 50's cycles, the effective stiffness and equivalent damping of RB were almost constant compared with those of the 1st cycles due to low hysteretic damping. The shear modulus of RB was reduced after large deformation, and this value of RB was partly recovered after 40 days. Finally, the shear failure test of RB was conducted, the prototype was failed over 490% of shear strain, and real size RB was failed over 430% of shear strain.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.21 no.3
• /
• pp.234-240
• /
• 2011

This study deals with progressive collapse of a structure retrofitted with MR dampers. In order to assess their effect of mitigation which prevents progressive collapse, control force ratio is defined by friction force of MR dampers divided by external force. First, simple model of a structure with MR dampers is suggested. Using the model, exact solution with the control force ratio is obtained. When and where the system is stopped is predicted by the derived solution. Through the dissipated energy by MR dampers during collapse event, equivalent damping ratio is derived. Finally, comparison of exact and equivalent solutions is presented.