• Journal of Power System Engineering
• /
• v.18 no.3
• /
• pp.20-28
• /
• 2014

Most washing machines are now produced as a drum-type, where a washing drum mounted on a suspension system with springs and dampers, to minimize the transmittance of the vibration from the drum to the cabinet. The purpose of this paper is to develop optimized suspension system of the drum washing machine which minimizes transmission of disturbing vibration and force. In this paper, a method for optimizing suspension system of the drum washing machine is presented using ADAMS. The design variables to optimize are extracted using Sequential Quadratic Programming(SQP) in ADAMS. To evaluate optimized spring constants and damping coefficients of the drum washing machine, simulation was done to compare the vibration attenuation performances before and after the optimization. The results of simulation show that the optimized suspension system has better performance than before the optimization.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2006.05a
• /
• pp.429-430
• /
• 2006

To estimate the fatigue life of flange-shaft assembly, fatigue test for flange material and bending fatigue test for flange-shaft assembly were conducted. Also, finite element analysis for flange-shaft assembly was conducted. Then, we have changed the obtained P-N curve to S-N curve using the finite element analysis results which were stress values at the location of fracture. The S-N curve of flange material itself was almost consistent with that of flange-shaft assembly, so it seems that the fatigue life of flange-shaft assembly could be estimated by using S-N curve for flange material and the stress at the location of fracture calculated by finite element methods.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2003.05a
• /
• pp.313-318
• /
• 2003

The vibration of washing machine at spinning cycle is important problem that affects the performance of a product. In this raper, the inner structure of the washing machine is modeled as a rigid body suspension system and transfer farce caused by rotating unbalance mass is obtained using Newton's the 2nd law. and this model is used to predict the verge of walking instability during the spinning cycle. The walk of the drum washing machine is suggested by calculating the force transmissibility between drum and the cabinet. As calculating the resultant force exerted for cabinet, the friction coefficient of the pad is suggested to avoid the walk. In addition, relation between translational slip and rotational slip is derived and method to avoid the rotational slip is introduced.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.412-414
• /
• 2007

In motor driving, one of the most important consideration is the load characteristic and variation. Generally, the motor drive should be made enough for the current by load variation, and it should be controlled by the load weight. However, the drum washing machine's load variation is irregular and large. Therefore, we want to make the motor drive that considering this load pattern, this paper describes the drum washing machine's load pattern modeling by the mathematical theory.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1997.10a
• /
• pp.119-131
• /
• 1997

Ball type automatic balancer is used to reduce the vibration caused by unbalance of rotor. In this study, A analytic modeling of a front loaded washing machine with ball type automatic balancer has been suggested theoretically and ADAMS has been used to analyze the dynamic characteristics of automatic balancer. It is found from simulation and experimental results that the automatic balancer suppress the steady state vibration of the washing machine effectively. The test results match well with the simulation results of ADAMS, thereby the dynamic model of ADAMS can be used as virtual prototype to predict the vibration characteristics which could be changed by the modification of design variable and can reduce the design cycle sharply. To maximize the balancing effect of automatic balancer, the friction between balls and race and the deviation between geometric center and rotation center of drum need to be minimized and the optimum design for the stiffness of flange shaft and the angular acceleration of drum should be achieved.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.5 s.153
• /
• pp.753-761
• /
• 2006

This paper suggests the optimal conditions for the laundry to prevent from the electrostatic charge by the evaluation of the electrostatic characteristics in the full process of washing and drying. Cotton, nylon, and polyester fabrics were used as test washing specimens. Detergent and softener were used under the standard washing cycle, and then the electrostatic characteristics of laundry were measured. The results showed that the moisture regain decreased and the electrostatic charge increased with the drying time. It was observed that the specimen fabrics were already dried up before the standard drying cycle was finished. Consequently, the excessive drying caused a generation of electrostatic charge due to the removal of the trace of moisture remaining and the excessive friction. Especially, the softener played an important role to prevent from a generation of electrostatic charge, whose insertion was more effective in the drying than in the rinsing process. It was also shown that the electrostatic charge could be decreased by drying the fabrics of one kind. On the other hand, for drying the mixed kinds of fabrics, the electrostatic charge increased remarkably. Therefore we suggest that the laundry be classified according to the kinds of fiber, and then be washed and dried before excessive drying to reduce electrostatic charge And further, a proper use of softener is effective to reduce electrostatic charge.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.31 no.1 s.160
• /
• pp.57-67
• /
• 2007

The purpose of this study is to find out the better washing condition, especially on detergent contents to satisfy the consumer's concern on fabric hand using Drum Type Washer. The hand and preference of washed fabrics by various detergent contents were analyzed through subjective evaluation using questionnaire method in dry and wet state. Wine rank's semantic differential scale questions were developed with 27 kinds of adjective pairs and seven rank's scale questions were to evaluate preference of washed fabrics oil holistic touch, washing and rinsing effect and purchase intention of detergent. Group of trained panelists and untrained women panelists of $30{\sim}40$ years old were participated. The factors affecting consumer's taste for the washed fabrics were analyzed by SPSS 12.0. Smoothness showed relatively higher correlation with preference of washed fabrics on holistic touch, washing and rinsing effect and purchase intention of detergent. There were significant differences in preference of washed fabrics on holistic touch, washing and rinsing effect and purchase intention of detergent by detergent contents when tested in wet state. Fabrics washed with detergents of non-zeolite were appeared to be the preferred ones.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.2
• /
• pp.117-122
• /
• 2014

A novel method to reduce the vibration of drum type washing machine is proposed. Recently, as the capacity of the drum-type washing machine gets expanded and its washing performance is improved, its market share is increasing in the whole world. But, the capacity of washing machine is limited because of door size and built-in washing machine size. The vibration of washing machine is caused by unbalanced cloths in high spining drum, and the displacement of tub is maximized at transient range about 3 Hz(180 rpm). Previous researches were concerned about steady-state vibration in spinning. In this study, concerned about transient vibration and the displacement of tub is decreased by using gyroscope system. Mutibody dynamic model of washing machine include gyroscope is designed and the vibration of tub have been reduced by 44.7 % over original.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.1311-1314
• /
• 2005

Recently drum washing machines are required to improve not only functions, but also endurance security. The spider is one of the major parts in a drum washing machine as a power transmission device. It is needed estimating for fatigue life because it rotates at high velocity when the drum washing machine works. In this study, we tried to estimate fatigue life of the Spider with CAE and verified the accuracy by comparing the CAE results with the experimental results. The estimation method of fatigue life for the spider with CAE will be applied to raise the efficiency of time and money in the design process of a new drum washing machine.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.06a
• /
• pp.561-564
• /
• 2005

The quality of a rotating body such as a washing machine depends on the vibration characteristics. So, the researches to reduce the vibration of a washing machine are actively performing, but it is very difficult to conduct these experiments because there are many design parameters affecting the vibration behavior. Accordingly, in this study it was complete to build a modeling of a drum washing mashing to analyze and predict vibration behaviors. The design parameters which affect the vibration were found, and the method for the systematic analysis of the design parameters was suggested using axiomatic design. In the previous study, the effect of the gasket has not considered on vibration behaviors, but in this study it was considered. The simulation results showed good agreements with the experimental results in the vibration displacement and the vibration tendency of a drum washing machine.