• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.613-614
• /
• 2013

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.24 no.8
• /
• pp.628-635
• /
• 2014

The procedure to estimate the sources of noise and vibrations in a typical drum-type washing machine was presented. The sources should be identified to predict the radiated noise with computational model of structure. Source identification techniques based on singular decomposition were implemented using the measured signals of accelerometers and microphones. The finite element analysis and indirect boundary element analysis were implemented to predict the structural vibrations and the acoustic pressures at the field points. The predicted results by only structural sources were compared with those by both structural and acoustical sources. It was verified that not only the structural-borne source but also air-borne source should be considered to predict the radiated noise with better accuracy. The contribution analysis with respect to the transfer path was also preformed.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.22 no.6
• /
• pp.564-573
• /
• 2012

The objective of this study is to determine the effect for the sound quality according to the noise source and to build the sound quality index of the laundry noise. In order to compare laundry noise among the influence of noise sources, we made virtual laundry noises by synthesizing an actual laundry noise and each noise source such as a dropping noise, water noise, motor noise and circulation pump noise. We conducted a listening test by customers using virtual laundry noises. As a result of listening test, we found that the dropping noise has a decisive effect on the sound quality of the laundry noise. We conducted the multi regression analysis of sound quality for the laundry noise using the statistical data processing. It is verified to the reliability of the multi regression index by comparison with listening results and index results of other actual laundry noises. This study is expected to provide a guide line for improvement of the laundry noise.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.23 no.7
• /
• pp.617-623
• /
• 2013

Accurate prediction of the radiated noise is important to reduce the noise of the washing machine. It is also necessary to predict the excitation force accurately because excitation force can induce noise. In order to predict the excitation force acting on the washing machine, this paper conducts source identification method by use of phase reference spectrum. In this method, the transfer function between the cabinet and the motor through FEM and the measured response from the surface of the cabinet is used. The analysis of the radiation noise from the identified exciting force has been investigated. The comparison between the predicted SPL and the measured SPL at 1m apart from the front side of the washing machine showed good tendency.

• Proceedings of the KSME Conference
• /
• 2003.11a
• /
• pp.1642-1647
• /
• 2003

The market of the horizontal axis washing machine (drum washing machine) has been growing drastically in Korea by about 80% annually since 2000. As market grows fast, the customerTs demands concerning quality becomes more strict and various. Imbalance sensing is a key technology to reduce the NVH problem in a washing machine, because the laundry is time-variant and uncontrollable source of imbalance, which can cause more than 200kgf exciting force. In this paper, imbalance-sensing methods are briefly reviewed, new acceleration sensing circuits are examined, and finally the control algorithm of spinning process is proposed and validated.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.23 no.5
• /
• pp.737-744
• /
• 1999

Underwear made of plain and 1$\times$1 rib-knit cotton fabric were laundered to evaluate the change of the size and the tensile properties. For laundering pulsator and drum washers were used. After 30 washing cycles the amount of shrinkage and the extension were different with washer types. Underwear laundered by the drum type was shrunken in the neck line armhole line and hem line were extended and the bodice width and side length were shrunken,. Tensile strength of the knitted fabric was not decreased through repeated washings because the fabric density was increased. But it was confirmed by SEM that the surface of the fiber was damaged by washings.

• Journal of the Korean Society for Precision Engineering
• /
• v.33 no.9
• /
• pp.731-737
• /
• 2016

In the quest for improved capacity and accelerated dehydration speed of drum type washing machines, an increase in vibration emerges as a major challenge. In an attempt to derive a new design with reduced vibration, a full finite element model of washing machine has been developed, with experimental verification. After modal analyses of several design variants, a new design of the cabinet has been proposed. Forced vibration analysis of the new model suggests that 19% reduction in cabinet vibration amplitude can be achieved with this design.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.11a
• /
• pp.248-251
• /
• 2004

The vibrational behavior of a front load washing machine is heavily influenced by the floor stiffness on which the washing machine is installed. In case the floor stiffness is extremely low like a wooden floor (we call it a 'soft floor, S/F'), it is quite probable that a washer's rigid body mode exists in the operating frequency range. In this case, the outer frame vibration level would be very high, but the mitigation scheme is quite limited except the excitation force abatement by acquisition of the optimal inertia in the internal vibratory system and the diaphragm's stiffness with the minimum force transfer.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.32 no.6
• /
• pp.947-958
• /
• 2008

To study the effect of a washing machine with silver nano technology on its detergency, the discoloring of the dyed clothes and the staining of standards adjacent fabrics were examined. As the laundry specimen, cotton fabric dyed with reactive dyes and Polyester fabric dyed with disperse dyes were chosen; and as the adjacent fabrics, undyed cotton. polyester and nylon fabrics were chosen. The colorfastness was evaluated after washing under conditions that those washing temperature, liquor ratio, detergency concentration and the type of water were varied. When the clothes were washed with the tap water contains silver ion, the deposition of silver compounds into the washed clothes was measured. As a results, after the washing in the various conditions, discoloring of the dyed clothes was not intense. The higher the washing temperature and the lower the liquor ratio, the larger the staining appeared on the white fabrics; especially for the white nylon fabrics. The concentration of detergent and the type of water affected hardly the colorfastness. After the repeated washing with the water contains silver, whiteness of the cotton and the nylon fabrics were lower than the result after the washing with the tap water, and a quantity of silver ions was found on the washed clothes.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.9 no.2
• /
• pp.60-65
• /
• 2010

Injection molding process is one of the popular manufacturing methods to produce plastic parts with high efficiency and low cost. The tub-drum for drum type washer is made by an insert injection molding process with aluminum alloy insert of windmill type and has a big and complex structure consisted of many ribs to sustain the strength. In this paper, the volumetric shrinkages of rib part and bottom part surrounded by a windmill type insert are analyzed according to the vertical and circumferential direction of tub-drum. Volumetric shrinkage and its difference according to the height or radius of tub drum inform the designer to reduce the warpage of tub drum, and the optimal design of tub drum can be done from the those results. The change of volumetric shrinkage according to packing pressure is also analyzed. It is very important to analyze the volumetric shrinkage of tub drum because it generates the wearing phenomena at the rotating part connected to an aluminum alloy insert due to the warpage of tub drum.