• Proceedings of the Korean Fiber Society Conference
• /
• 1998.04a
• /
• pp.266-269
• /
• 1998

세 번수 단사로 제직된 모직물은 그 사용도가 높아지고 있으나 의복의 형태안정성이 문제되고 있다. 형태안정성 중에서 특히 공기중 수분의 흡수, 발산에 따른 수분율의 차이로 발생하는 습윤팽창은 시임 퍼커링, 의복의 뒤틀림, 의복 사이즈의 불량, 접착심지의 이탈등의 다양한 의복 외관상의 문제점을 야기시킬수 있다$^{1-4)}$ . 이러한 모직물의 습윤팽창은 직물의 길이와 두께를 변화시켜서 기공도에 영향을 미치고 나아가 의복의 쾌적감에도 영향을 미치게 된다.(중략)

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.05a
• /
• pp.57-57
• /
• 2004

복합재료는 단독재료로서는 가질 수 없는 높은 비강성, 비강도 등의 우수한 재료 특성을 가지고 있으므로 산업분야가 다양해지고 경량화를 요구함에 따라 우주/항공 방위 산업, 자동차, 스포츠 등의 여러 분야에 사용되어 지고 있으며, 현재 1 차 구조재로서의 연구가 활발히 진행되어 지고 있다 그러나 복합재료 보 이론의 경우 현재까지 얇은 복합재료 보의 거동에 관한 연구는 활발히 진행되어 왔으나, 아직 두꺼운 복합재료 보의 거동에 관한 이론의 정립은 미비한 상태이며 구조재로서의 복합재료 보를 적용하기 위해서는 두꺼운 복합재료보를 적용하기 위해서는 두꺼운 복합재료 보 이론 모델의 개발이 시급한 실정이다.(중략)

• Proceedings of the KSR Conference
• /
• 1999.05a
• /
• pp.428-433
• /
• 1999

In this study, new finite clement formulations are carried out to analyze the distortion of the curved steel box girders which are susceptible to the torsional loading. For the exact analysis of curved box girders, additional degrees of freedom are added besides the conventional 6 degrees of freedom of general-purpose finite analysis programs, which are torsional warping, distortional warring, and distortion. New formulations were coded into a computer programs. Several numerical examples were presented to demonstrate the validity of developed program.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2018.07a
• /
• pp.177-178
• /
• 2018

본 논문에서는 와전류 탐상시험을 이용하여 전력선의 절연상태 진단을 수행하였다. 전력선은 6~18 가닥의 선으로 이루어져 있는데 절연상태 변화를 위해 수산화나트륨으로 전력선의 부식을 유도하였으며, 18~27 시간으로 부식시간을 설정하여 시편을 구분하였다. 전력선의 인장력시험, 뒤틀림시험, 전자주사현미경 등을 통하여 물리적 특성을 검토하였으며, 또한 200~800[mV]의 전압에서 부식에 따른 와전류 특성을 조사하였다.

• Journal of Korean Society of Steel Construction
• /
• v.15 no.2
• /
• pp.125-135
• /
• 2003

A 3-dimensional model of curved steel box girder bridges without diaphragm was presented. This model yielded results that were consistent with those of the parameter analysis using the BEF and Ritz methods. Se veralmodels with diaphragms were analyzed to estimate the appropriate diaphragm spacing. In case of 50m span, models A-10, A-20, A-30, B-10, B-20, and B-30 were found to have 5(8.3m), 7(6.25m), 8(5.5m), 4(10m), 6(7.1m), and 7(6.25m) diaphragms, respectively. In addition, a formula that presents the ratio of distortional stress to bending stresswas created from the results of the 3-dimensional FEM model analysis.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.10 no.1
• /
• pp.205-215
• /
• 2006

In this study 3-D shell FEM model was applied to analyze the behavior of curved steel box girders stiffened by diaphragms. The reliability of the analytical method has been proved by comparing with the existing results. It was also found from this analysis that main factors affecting a distortional stress are length of a girder, curvature of the girder, and spacing of diaphragms. A modelled bridge with 30m of span length and 40m of radius was analyzed to find an optimum spacing of diaphragm, and as a result of applying different spacings, 5m was found to be most appropriate to control the stress ratio regulated by specifications. In the effect of diaphragm shape, the rhamen-typed diaphragm is found to be more effective than the fully filled-up one in the range of opening ratio of 0.4 to 0.6. But, the fully filled-up diaphragm had more efficiency in terms of reducing the distortional stress than X-truss typed diaphragm.

• Composites Research
• /
• v.27 no.4
• /
• pp.174-181
• /
• 2014

This study describes viscoelasticity analysis of carbon-fiber reinforced polymer matrix composite material. One of the most important problem during high temperature molding process is residual stress. Residual stress can cause warpage and cracks which can lead to serious defects of the final product. For the difference in thermal expansion coefficient and change of resin property during curing, it is difficult to predict the final deformed shape of carbon-fiber reinforced polymer matrix composite. The consideration of chemical shrinkage can reduce the prediction errors. For this reason, this study includes the viscoelasticity and chemical shrinkage effects in FE analysis by creating subroutines in ABAQUS. Analysis results are compared with other researches to verify the validity of the subroutine developed, and several stacking sequences are introduced to compare tested results.

• The Journal of the Acoustical Society of Korea
• /
• v.35 no.5
• /
• pp.403-409
• /
• 2016

Traditional towed line arrays using omni-directional sensor suffer from the well known port-starboard ambiguity, because the direction of arrival is determined by conic angle. The operational method and structure of the sensor arrays method have been proposed to solve this problem. Recently, a lot of research relating to the acoustic vector sensor are studied. In this paper, we study port-starboard discrimination for roll of acoustic vector sensor array. With one omni-directional sensor and three orthogonally-placed directional sensors, an acoustic vector sensor is able to measure both the acoustic pressure and the three directional velocities at the point of the sensor. The wrong axis due to the roll at directional sensors can degrade performance of beamforming. We investigate port-starboard discrimination for roll of sensor array and confirm the validity of performance of beamforming with compensated the roll.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.1
• /
• pp.8-13
• /
• 2020

Stress is the main cause of warpage failure of very thin substrates with thickness of several hundred ㎛, such as IC packages. Stress usually results from differences in crystal structures and corresponding thermal expansion coefficients when depositing different substances on a substrate. In this study, the behaviors of stress occurring in substrates were numerically analyzed by the thin-film pattern of the rectangles stacked on the substrates. First, the substrate displacement was obtained and the substrate strain and stress were obtained using it. When the tensile force is concentrated at the edge of the thin film pattern, normal and shear stresses are generated around the edge of the thin film pattern. Normal stress occurs near the edges of the thin film pattern and the vertexes. Shear stress also occurs around the edge of the thin film pattern, but unlike normal stress, it does not appear near the vertexes. It was also confirmed that the magnitude and direction of shear stress are changed around the edge. When edge forces of thin-film pattern are equal, the normal stress was about 10 times larger than the shear stress. This indicates that normal stress is the biggest cause of warpage failure.

• Journal of the Korean Institute of Gas
• /
• v.8 no.3 s.24
• /
• pp.8-15
• /
• 2004

This paper presents von Mises stress, deformation, and rotating distortion moment characteristics of inner tank bottom plate as a function of a cryogenic temperature difference along the radial distance from the center area to the corner one. The calculated results show that the filling level of LNG at the beginning of the cool-down process is very important for the design safety analysis of the inner tank. Obviously the thermal loading by a temperature difference between the LNG vapor gas of $-80^{\circ}C$ and a LNG temperature of $-162^{\circ}C$ affects to the thermal related characteristics of the bottom plates and annular one. From the computed results, the temperature difference by a vapor gas and liquid of LNG may lead to the thermal instability of the bottom plate. This phenomenon may cause the system failure of an inner tank.