• Korean Chemical Engineering Research
• /
• v.48 no.2
• /
• pp.185-192
• /
• 2010

The chemical-looping combustion(CLC) has advantages of no energy loss for separation of $CO_2$ without $NO_x$ formation. This CLC system consists of oxidation and reduction reactors where metal oxides particles are circulating through these two reactors. In the present study, the reaction kinetic equations of iron oxide oxygen carriers supported on bentonite have been determined by the shrinking core model. Based on the reactivity data, design values of solid circulation rate and solids inventory were determined for the rector. Two types of interconnected fluidized bed systems were designed for CLC application, one system consists of a riser and a bubbling fluidized bed, and the other one has a riser and two bubbling fluidized beds. Solid circulation rates were varied to about $30kg/m^2s$ by aeration into a loop-seal. Solid circulation rate increases with increasing aeration velocity and it increases further with an auxiliary gas flow into the loop-seal. As solid circulation rate is increased, solid hold up in the riser increases. A typical gas leakage from the riser to the fluidized bed is found to be less than 1%.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.226-233
• /
• 2016

Purpose: The purpose of this study was to evaluate the adaptation of lithium disilicate crowns fabricated by CAD-CAM (computer aided design-computer aided manufacturing) and heat-press technique to compare two different measurement methods in assessing fit of the ceramic crowns: micro CT and cross-section technique. Materials and methods: A prepared typodont mandibular molar for ceramic crown was duplicated and ten dies were produced by milling the PMMA (polymethylmethacrylate) resin. Ten vinyl polysiloxane impressions were made and stone casts were produced. Five dies were used for IPS e.max Press crowns with heat-press technique. The other five dies were used for IPS e.max CAD crowns with CAD-CAM technique. Ten lithium disilicate crowns were cemented on the resin dies using zinc phosphate cement with finger pressure. The marginal and internal fits in central buccolingual plane were evaluated using a micro CT. Then the specimens were embedded and cross-sectioned and the marginal and internal fits were measured using scanning electronic microscope. The two measurement methods and two manufacturing methods were compared using Mann-Whitney U test (SPSS 22.0). Results: The marginal and internal fit values using micro CT and cross-section technique were similar, showing no significant differences. There were no significant differences in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique. Conclusion: Both micro CT and cross-section technique were acceptable methods in the evaluation of marginal and internal fit of lithium disilicate crown. There was no difference in adaptation between lithium disilicate crowns fabricated with CAD-CAM and heat-press technique except occlusal fit.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.12
• /
• pp.49-54
• /
• 1972

In order to learn the growth pattern of high yielding paddy and the effect of slaked lime and potassium on the growth pattern, a relationship between the number of panicles and tillers at different growth stages, as well as the effect of slaked lime and potassium on the increase of tillers were studied with three pot and one field experimental results. 1. The number of tillers at early stages of growth has little or negative correlation with the number of panicles. However. the correlation grows positively as the growth stage proceed and become to highly significant from the stage closing to the panicle formation. 2. Potassium is effective on increasing tillers and calcium on decreasing them. The above contradictory effect of potassium and calcium would practically be an important point for the establishment of high yielding technics of paddy, which be the one to be studied from the view point of plant physiology and soil chemistry. 3. The negative effect of calcium on tillering also seemed to be attributed to the pH rise of the media.

• The Journal of the Korea Contents Association
• /
• v.9 no.1
• /
• pp.238-245
• /
• 2009

Korea is a divided country, therefore South and North Korea have different views of division and unification. The state of division is national hurt and the unification is aspiration irrespective of different environment of politics, economy and culture. Unification has been national goal since Korea was divided, it represents for a variety forms. Especially films show the relationship and prejudices of South and North Korea. This thesis focus on representation of different views of unification of South and North Korea on , and . First one is the film of North Korea, and the others are films of South Korea. These are romantic comedy films, we could see the views of unification through marriage. And we would find out the unification in their own two different ways.

• Journal of the Korean Chemical Society
• /
• v.34 no.5
• /
• pp.396-403
• /
• 1990

We describe how to design and construct a LPCVD (Low Pressure Chemical Vapor Deposition) apparatus which can be applicable to the study of reaction mechanism in general CVD experiments. With this apparatus we have attempted to make diamond like carbon films on the p-type (111) Si wafer from (H$_2$ ＋ CH$_4$) gas mixtures. Two different methods have been tried to get products. (1)The experiment was carried out in the reactor with two different inlet gas tubes. One coated with phosphoric acid was used for supplying microwave discharged hydrogen gas stream, and methane has been passed through the other tube without the microwave discharge. In this method we got only amorphous carbon cluster products. (2) The gas mixture (H$_2$ ＋ CH$_4$) has been passed through the discharge tube with the Si wafer located in and/or near the microwave plasma. In this case diamond-like carbon products could be obtained.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.25 no.4
• /
• pp.294-303
• /
• 2005

This paper describes the analysis results of a series f Round-Robin test that was performed to intercompare inspection and diagnosis techniques for characterization of pressure tube f a pressurized heavy water reactor under the Coordinated Research Project(CRP) of IAEA's nuclear Power Programme. For this test, six nations, Korea, Canada, India, Argentina, Rumania, and China that currently have pressurized heavy water reactors under operation involved, and the "KOR-1" pressure tube sample prepared by Korea was used. Two kinds of NDE technique, ultrasonic and eddy current test, were applied for these tests. The "KOR-1" pressure tube sample contains total 12 artificial flaws such as crack-like EDM notches, wear that is similar to the real flaws and can be produced on the pressure tubes during plant operation. Test results showed that seven laboratories from six nations detected all twelve flaws in "KOR-1" specimen by using ultrasonic and eddy current test methods, and ultrasonic test method was more accurate than eddy current test method in flaw detectin and sizing. ID flaws in pressure tube sample were more easily detected and accurately sized than OD flaws.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.2
• /
• pp.241-248
• /
• 1998

The accurate measurement of the room sound level is required in environment noise control. However, it has been found that the measurement system noise always corrupts the actual noise from the sound source. In this study, a new sound level measurement technique in which the system noise is eliminated from the measured signal by the cross spectrum method, is proposed. The received signals of two measuring microphones are recorded to DAT through the pre-amplifier and digitized by A/D converter. The cross spectrum calculated from the digitized signals gives the accurate sound level since the system noise is uncorrelated with the sound source noise which we want to measure. The performance of the proposed technique is verified experimentally to be effective and the technique is found to be economic since the low cost general purpose microphone could be used in this technique.

• Journal of the Korea Convergence Society
• /
• v.9 no.8
• /
• pp.283-291
• /
• 2018

The purpose of this study is to identify the main factors influencing the culture of social welfare agencies and to find out the types of culture that they are combining through. The research method has two major processes. The first step was to conduct long-term surveys on one agency and find out the factors influencing the organizational culture. In the second step, we found a type of organizational culture by combining the elements in six agencies. As a result of research, we found leadership, openness, and locality as factors influencing organizational culture, and found that they were restricted-care, expanded-participatory, change-mixed, and stable-mixed. The results of this study are meaningful in that it reflects the complex situation of Korean social welfare organization. Future research will need to expand to the whole country in order to improve the generalization of typification.

• Korean Journal of Ichthyology
• /
• v.26 no.4
• /
• pp.281-287
• /
• 2014

An olfactory organ in Scartelaos gigas, so-called mudskipper known as adaptation to an amphibious lifestyle, was investigated anatomically and histologically. S. gigas possessed the paired olfactory organ comprising respectively the one elongated canal and two nasal sacs, lacrimal and ethmoidal nasal sac. The sensory epithelium developed partly in the canal contained four distinct types of cells: (1) receptor cell with 3 to 4 cilia in number, (2) supporting, (3) basal, (4) mucus cell. The sensory epithelium was also of transitional layer as multi cellularity structure. The non-sensory epithelium had no sensory elements. The two nasal sacs possessed typically a lot of mucin droplets. These results might be considered that anatomical structure and histological characters of the olfactory organ showing in S. gigas is adapted to semi-aquatic life associated with its ecological habit and habitat.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1433-1440
• /
• 2015

In this paper, we propose an unambiguous correlation function to improve tracking performance for binary offset carrier (BOC) signals. Specifically, we divide a BOC sub-carrier into multiple rectangular pulses, and analyze that the BOC autocorrelation function is made up of the sum of several partial correlation functions. Then, we obtain two sub-correlation functions by combining two partial correlation functions and propose a novel unambiguous correlation function with no side-peak which can be regulated its width based on the combination of the sub-correlation functions and partial correlation functions. From numerical results, it is confirmed that the proposed correlation function provides a tracking performance improvement over the conventional correlation functions in terms of the tracking error standard deviation.