• KSBB Journal
• /
• v.21 no.3
• /
• pp.224-229
• /
• 2006

FEMLAB is a powerful interactive environment for modeling, solving all kinds of scientific and engineering problems based on partial differential equations(PDEs). Separation process of chiral compound in HPLC columns was simulated by FEMLAB. To study change of elution profile with isotherm models, non-competitive and competitive Langmuir adsorption isotherm were adopted. Separated material was (R, S)-ibuprofen [(R, S)-2-(4-isobutyl phenyl) propionic acid], an anti-inflammatory agent, which retain the pharmacological activity in the (S)-(+)-enantiomer. Sample concentrations were changed from 0.5 mg/ml to 2.0 mg/ml at a flow rate of 1 ml/min and flow rate varied from 1 ml/min to 3 ml/min at an ibuprofen concentration of 2.0 mg/ml and $20{\mu}l$ of injection volume. Simulated results were well fitted with experimental data.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.1
• /
• pp.23-29
• /
• 2011

This study investigates the axial behavior of CFRP strengthened circular CFT columns and proposes the design formula of CFRP strengthened circular CFT columns. 10 specimens were prepared and axial loading test were conducted to investigate the retrofitting effects of CFRP composites on CFT columns. The main parameters are the number of FRP sheets and D/t ratio. Test results showed that the CFRP retrofitting enhanced the load bearing capacity of the circular CFT columns. Finally, A ACI 440 code applied ultimate axial strength formula is proposed to predict the ultimate strength of CFRP strengthened circular CFT columns. The proposed formula are good agreement with the test results.

• Elastomers and Composites
• /
• v.45 no.4
• /
• pp.250-255
• /
• 2010

From the three element non-Newtonian model of one non-Newtonian viscoelastic Maxwell elements and a elastic spring, the stress relaxation equation was derived. The various model parameters of this equation were evaluated by appling the experimental results of stress relaxation to the stress relaxation equation. The theoretical curves calculated from this model parameters agreed with the experimental stress relaxation curves. From the parameters of nonlinear viscoelastic model, the hole volume, fine structure, viscoelastic properties and mechanical properties of polymer fibers were studied. The experiments of stress relaxation were carried out using the tensile tester with the solvent chamber. The stress relaxation curves of the two types polyacrylonitrile-polyvinylchloride copolymer and another two types PVC monofilament fibers were obtained in air and water of various temperatures.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.3
• /
• pp.265-277
• /
• 2001

This paper present a study on the flexural behavior of composite slabs using the flat-type profiled(ACE-DECK) steel deck plate which are developed recently. Forty eight composite slabs with different thickness, span, shear span and deck profile were tested to evaluate the flexural capacity and compared to the existing traperzodial deck profiles (KEM, ALPHA-DECK) According to the experiment results, flat-type profiled steel deck plate indicates more excellent capacity than existing traperzodial deck profiles in strength, stiffness, and ductility. The equation proposed by ASCE code for the effective moment of inertia are more acceptable than the equation proposed by ACI code. Thus, in this paper, test results are summarized by strength, stiffness, and deformation capacity for the specimens.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2009.05a
• /
• pp.1827-1831
• /
• 2009

본 연구에서는 래버린스 형태 중 비교적 연구가 거의 되어 있지 않은 직사각형 래버린스 위어의 유량특성을 분석하여 월류량 증대효과를 분석하고자 하며 직사각형 래버린스 위어의 복잡한 흐름현상을 구현하기위해 수리모형실험을 수행하였다. 수리모형실험은 직사각형 래버린스 위어의 다양한 형상을 고려하기 위해 유효길이와 위어 폭 비(L/W)의 범위를 2, 4, 6, 8, 10으로 적용하였다. 또한, 수리모형실험에서 수심 변화에 대한 범위는 전수두와 위어 높이의 비를 0.05에서 0.75범위로 수행하였다. 직사각형 래버린스에 대한 유량 특성을 유량비와 유량계수 곡선을 이용하여 월류량 증대효과를 분석하였다. 그 결과, 직사각형 래버린스 위어의 유량비는 L/W가 증가할수록 감소하는 경향을 나타냈으며, 전수두 비$(H_t/P)$가 증가할수록 작아지는 경향을 나타냈다. 즉, 일반 선형 위어보다 월류량 증대하는 효과가 낮은 전수두 비에서 발생하는 것으로 분석되었으며, 월류량 증대를 위한 수공구조물 설계의 기초자료로 활용이 가능할 것이다. 향후, 유량계수를 예측하는 관련 식이나 기법을 개발하여 효과적으로 래버린스 위어의 유량을 산정할 수 있을 것이다.

• Korean Chemical Engineering Research
• /
• v.43 no.3
• /
• pp.360-365
• /
• 2005

SMB (simulated moving bed) is a continuous chromatographic process by shifting periodically port position. Binary of mixture, Blue dextran and Orange G, was separated by SMB. These components have unique color individually, that is, Blue dextran is blue and Orange G is orange. It is easy to understand SMB process by observing the shift of color changes in SMB. These components was not adsorbed to stationary phase and isolated by difference of size exclusion factor. Mass transfer coefficient was determined by single pulse test under several flow rate conditions. Operation condition was obtained by standing wave theory and optimized for high purities in extract and raffinate streams. Experiment was performed in open loop 4 zone (2-2-2-2) SMB. There are several advantages in open loop SMB, where extract is product for high purity. It is also easy to control flow rate and monitor experimental state during operation. Experimental, extract and raffinate history is well fitted with simulation results, however, column concentration profile is a little different from simulation results. Purities were 99.5％ for extract and 98.9％ for raffinate and extract and raffinate yields were obtained as 98.9％ and 99.4％ respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.6A
• /
• pp.543-560
• /
• 2010

Safety-related concrete structures in a nuclear power plant must be protected against the impact of flying objects, referred to in the profession as missiles. In practice, the structural verification is usually carried out by means of empirical formulas, which relate the velocity of the impinging missile to the wall thickness needed to prevent scabbing or perforation. The purpose of this study is to reevaluate the predictability of the local effect prediction formulas for the penetration and scabbing depths and perforation thickness. Therefore, available formulas for predicting the penetration depth, scabbing thickness, and perforation thickness of concrete structures impacted by solid missiles are summarized, reviewed, and compared. A series of impact analyses is performed to predict the local effects of the projectile at impact velocities varing from 95 to 215 m/s. The results obtained from the numerical simulations have been compared with tests that were carried out at Kojima to validate numerical modelling. The simulation results show reasonable agreement with the Kojima test results for the overall impact response of the RC slabs. From these results, it seems that the Degen equation give a very good estimate of perforation thickness against a tornado projectile for test data. Finally, the results obtained from the impact analysis have been compared with Degen formula to determine the perforation thickness of the RC slab.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2008.05a
• /
• pp.439-443
• /
• 2008

본 연구는 어도에서의 어류이동의 적합성을 검증하기 위해 어도 수리실험을 통해 흐름에 따른 어류이동을 조사하는 것으로 하였다. 이를 위해 실험은 모형이 아닌 거의 실물에 가까운 원형 수준의 어도를 제작하였다. 물고기는 피라미를 준비하였으며, 어도 내부에 넣고 흐름을 형성시켜 어류의 거동을 비디오로 촬영하였다. 어도 격벽은 두께를 t=0.1m, 어도 폭은 B=1.0m, 격벽간 거리는 L=$1.0{\sim}2.0m$, 격벽간 낙차는 ${\Delta}H=0.1m$로 하여 각 경우에 따른 실험을 실시하였다. 본 연구 결과에 따르면 어류 이동에 효율적인 흐름의 속도는 $1.0{\sim}1.5$(m/s)임을 나타내고 있는데, 이는 기존 피라미의 선호유속(0.8m/s)보다 높은 편으로서, 이는 어류의 상류이동을 위해서는 선호유속보다 약간 높은 유속을 형성시킴으로써 어류가 상류로 이동하려는 의욕을 가지게 하는 것이 중요함을 시사하였다. 상기 실험 결과를 바탕으로 어류(피라미)의 상류 이동에 적합한 계단식 어도는 경사가 1/20이고, 상하류 격벽 단차가 10cm 정도로서 순환류가 약하게 형성되며, 월류 흐름의 속도가 $1.0{\sim}1.5$(m/s)를 유지하는 형태임을 알 수 있었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.8
• /
• pp.3723-3728
• /
• 2011

This study investigated the friction behaviors of rock and grout through the small /large scale laboratory experiments. The small-scale laboratory tests were undertaken using a specially designed and fabricated equipments to simulate the contact surface of rock. In calibration chamber test, a artificial rock mass was prepared in soil container to measure the tensile resistance of grout. Test condition includes the grouting method of pressure involvement. The results of the tests show that the pressure grouting increases the frictional resistance significantly.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.5
• /
• pp.455-470
• /
• 2015

This research suggest method to calculate more accurate shearing and bending force on corrugated steel plate that it is produced domestically. This research analyze limitation of former formula on domestic design standard and existing research. In addition The strength calculation formula on corrugated steel plate was proposed according to result of the experiment and FEM analysis. In this study, the result that compare experiment with analysis using the proposed shear buckling coefficient and limit width to thickness ratio indicate similar behavior. As the result of the research, It is judged that the structural member design and performance evaluation of the corrugated steel plate was conveniently applied.