• Title/Summary/Keyword: 두께분포

Search Result 1,262, Processing Time 0.033 seconds

Shielding Analysis of the Material and Thickness of Syringe Shield on the Radionuclide (방사성 핵종별 주사기 차폐기구의 재질 및 두께에 대한 차폐분석)

  • Cho, Yong-In;Kim, Chang-Soo;Kang, Se-Sik;Kim, Jung-Hoon
    • The Journal of the Korea Contents Association
    • /
    • v.15 no.7
    • /
    • pp.282-288
    • /
    • 2015
  • A monte carlo simulation about shielding material and thickness of the syringe shield for radiation shield was performed. As a result of analysis, high atomic number materials such as tungsten, lead and bismuth have the highest shielding effect. However, $^{18}F$, $^{67}Ga$ and $^{111}In$ show high energy distribution in the region with thin shielding thickness. As the thickness of shielding materials increased, the energy distribution decreased due to reduction of ${\gamma}$-ray. In the case of low atomic number materials, they, showed energy distribution from highest to lowest, were barium sulfate, steel, stainless, iron and copper. Aluminum, plastic, concrete and water showed diverse aspect. they showed relatively high energy distribution because of increased ${\gamma}$-ray that penetrate the shield.

Strength Behavior of Simply Supported Longitudinally Profiled Plates (단순지지 압연변두께 강판의 압축강도 특성)

  • Hwang, Won-Sup;Kim, Hyun-Min
    • Journal of Korean Society of Steel Construction
    • /
    • v.13 no.3
    • /
    • pp.245-254
    • /
    • 2001
  • This paper presents the basic data for the strength behavior of longitudinally profiled plates(LP plate). The effects of loading conditions, thickness and slenderness ratio of plates are examined by using FEM analysis. The analysis results shown that the strength behavior of LP plate is varied with the loading conditions. The major causes of the reduction in strength are the distribution of deflection and the slenderness ratio of plate. Based on the results, this paper presents some discussions about the strength evaluation of LP plate with considering the equivalent thickness.

  • PDF

Characterization of X-ray Detector for CCD-based Electronic Portal Imaging Device (CCD를 이용한 전자포탈영상장치의 엑스선 계측기 특성에 관한 연구)

  • 정용현;김호경;조규성;안성규;이형구;윤세철
    • Journal of Biomedical Engineering Research
    • /
    • v.21 no.2
    • /
    • pp.119-127
    • /
    • 2000
  • 금속판/형과스크린 계측기와 CCD 카메라를 이용한 방사선영상장치가 현재 전자포탈영상에 널리 쓰이고 있다. 이 장치의 효율적인 영상획득을 위해 계측효율이 좋고, 공간분해능력이 뛰어난 금속판/ 형과스크린 계측기의 두께를 최적화할 필요가 있었다. 이 논문에서는 금속판과 형광스크린의 두께가 계측효율과 공간분해능에 미치는 영향이 연구되었다. 이 결과는 치료 엑스선 영상장치에 쓰일 수 있는 금속판/형과스크린 계측기의 최적화된 두께를 결정하는데 쓰일 수 있다. 몬테칼로 방법을 이용하여 계산한6 MV 선형가속기에서 발생되는 엑시선의 에너지 스펙트럼을 바탕으로, 여러 가지 두께의 금속판/형광스크린에 대하여 계측효율과 공간분해능을 계산하였고, 이를 실험을 통해 검증하였다. 계측효율은 입사된 엑스선의 에너지가 형광스크린에 흡수된 비율로 계산되며, 공간분해능은 흡수된 에너지의 공간 분포를 통해 계산되었다. 계측효율은 금속판의 두께에 의해, 공간분해능은 형광스크린의 두께에 의해 결정될 수 있음을 본 연구를 통해 확인할 수 있었고, 이로써 특정이용에 관련된 금속판/형광스크린의 두께에 대한 서로 보상 (trade-off) 관계에 있음을 계산과 측정결과를 통해 확인할 수 있었고, 이로써 특정이용에 관련된 금속판/형광스크린 계측기의 최적화된 두께를 산출할 수 있게 되었다. 계산을 바탕으로 CCD를 이용한 전자포탈영상장치의 시작품을 설계 및 제작하였고 팬텀을 이용하여 영상을 얻었다. 단일 프레임 영상은 노이즈가 많으나, 프레임 평균 방법을 이용하여 영상의 질을 향상시킬 수 있었다.

  • PDF

Relation of Conduction Path and Subthreshold Swing for Doping Profile of Asymmetric Double Gate MOSFET (비대칭 DGMOSFET의 도핑분포함수에 따른 전도중심과 문턱전압이하 스윙의 관계)

  • Jung, Hakkee
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.18 no.8
    • /
    • pp.1925-1930
    • /
    • 2014
  • This paper has analyzed the relation of conduction path and subthreshold swing for doping profile in channel of asymmetric double gate(DG) MOSFET. Since the channel size of asymmetric DGMOSFET is greatly small and number of impurity is few, the high doping channel is analyzed. The analytical potential distribution is derived from Possion's equation, and Gaussian distribution function is used as doping profile. The conduction path and subthreshold swing are derived from this analytical potential distribution, and those are investigated for variables of doping profile, projected range and standard projected deviation, according to the change of channel length and thickness. As a result, subthreshold swing is reduced when conduction path is approaching to top gate, and that is increased with a decrease of channel length and a increase of channel thickness due to short channel effects.

Influence of Estimation Method of Compression Index on Spatial Distribution of Consolidation Settlement (압축지수의 추정방법이 압밀침하량의 공간적 분포특성에 미치는 영향)

  • Kim, Dong-Hee;Ryu, Dong-Woo;Kim, Min-Tae;Lee, Woo-Jin
    • Journal of the Korean Geotechnical Society
    • /
    • v.26 no.10
    • /
    • pp.39-47
    • /
    • 2010
  • In order to investigate the effect of variation characteristics of compression index on the spatial distribution of consolidation settlement, this study presents the estimation methods of the distribution of consolidation settlement and compares the estimated settlements. When the variation of compression index is considerable, the ordinary cokriging is more reliable in estimating the compression index than ordinary kriging because smoothing effect of ordinary cokriging is smaller than that of ordinary kriging. The spatial distribution of consolidation settlement estimated by considering both the variation of compression index and void ratio (CASE-1) is different from that estimated by using the mean value of all soil properties (CASE-2). The settlement of CASE-1 shows the larger variation at short distances rather than that of CASE-2. Whereas the spatial settlement distribution of CASE-1 is affected by the spatial distributions of compression index as well as the thickness of consolidation layer, that of CASE-2 is significantly influenced by the distribution of consolidation layer thickness.

정선군 남면 지역에 분포하는 고품위 석회석의 부존 특성

  • 서경환;손길상;박찬근
    • Proceedings of the Mineralogical Society of Korea Conference
    • /
    • 2002.10a
    • /
    • pp.1-15
    • /
    • 2002
  • 조사지역에는 고생대 캠브리아기의 장산규암층, 묘봉층, 풍촌층, 화절층 및 오도비스기의 동점층, 두무동층, 막동층, 그리고 이들과 부정합 관계인 중생대 쥬라기의 사평리 역암이 분포한다. 위의 지층들은 북동-남서방향으로 발달하는 두 개 조의 드러스트 단층과 이에 수반된 후향 드러스트 단층 및 습곡구조에 의해 분포가 지배된다 이들 지층 중 경제 지층인 풍촌층은 암상의 특성에 따라 하부석회암대, 중부백운암대, 상부석회암대(고품위대)로 세분되며, 이 중 상부석회암대가 고품위용으로 개발대상이 된다. 상부석회암대는 백색-유백색의 치밀질 괴상석회암, 담회색 괴상 석회암, 어란상 석회암 등으로 구성되는데, 평균품위는 $SiO_2\;0.40\%,\;A1_2O_3\;0.15\%,\;Fe_2O_3\;0.15\%,\;CaO\;54.2\%,\;MgO\;1.07\%,$ 백색도 85.7로 중탄용이나 생석회 및 소석회 등 화학공업용으로 사용가능한 범위를 보여준다 고품위대의 두께는 평균 약 40m이나 드러스트 단층 등의 구조요소에 의해 $2\~3$회 반복되어 분포하기도 하고 지역에 따라 두께가 $80\~90m$까지 두꺼워지기도 한다. 상부석회암대의 석회석을 중탄용, 소성용, 탈황용 등으로 개발을 위해서는 사전에 충분한 정밀시추탐사를 시행하여 그 부존규모 및 개발가능구간 확인이 선행되어야 한다.

  • PDF

정선군 남면 지역에 분포하는 고품위 석회석의 부존 특성

  • 서경환;손길상;박찬근
    • Proceedings of the KSEEG Conference
    • /
    • 2002.10a
    • /
    • pp.1-15
    • /
    • 2002
  • 조사지역에는 고생대 캠브리아기의 장산규암층, 묘봉층, 풍촌층, 화절층 및 오도비스기의 동점층, 두무동층, 막동층, 그리고 이들과 부정합 관계인 중생대 쥬라기의 사평리 역암이 분포한다. 위의 지층들은 북동-남서방향으로 발달하는 두 개 조의 드러스트 단층과 이에 수반된 후향 드러스트 단층 및 습곡구조에 의해 분포가 지배된다 이들 지층 중 경제 지층인 풍촌층은 암상의 특성에 따라 하부석회암대, 중부백운암대, 상부석회암대(고품위대)로 세분되며, 이 중 상부석회암대가 고품위용으로 개발대상이 된다. 상부석회암대는 백색-유백색의 치밀질 괴상석회암, 담회색 괴상 석회암, 어란상 석회암 등으로 구성되는데, 평균품위는 SiO$_2$ 0.40%, A1$_2$O$_3$ 0.15%, Fe$_2$O$_3$ 0.15%, CaO 54.2%, MgO 1.07%, 백색도 85.7로 중탄용이나 생석회 및 소석회 등 화학공업용으로 사용가능한 범위를 보여준다. 고품위대의 두께는 평균 약 40m이나 드러스트 단층 등의 구조요소에 의해 2~3회 반복되어 분포하기도 하고 지역에 따라 두께가 80~90m까지 두꺼워지기도 한다 상부석회암대의 석회석을 중탄용, 소성용, 탈황용 등으로 개발을 위해서는 사전에 충분한 정밀시추탐사를 시행하여 그 부존규모 및 개발가능구간 확인이 선행되어야 한다.

  • PDF

Relationships Between the Spatial Distribution of Vegetation and Microenviromnent in a Temperate Hardwood Forest in Mt. Jrnbong Biosphere Reserve Area, Korea (점봉산 생물권 보전지역내 온대낙엽수림에서 미소환경요인과 식생요인의 공간분포와 상관 분석)

  • Lee, Kyu-Song;Cho, Do-Soon
    • The Korean Journal of Ecology
    • /
    • v.23 no.3
    • /
    • pp.241-253
    • /
    • 2000
  • The degree to which microenvironmental factors are linked to spatial patterns of vegetational factors within ecosystems has important consequences for our understanding of how ecosytems are structured and for conservation of rare species in ecosystems. We studied this relationships between the spatial patterns of microenvironmental factors and vegetational factors in temperate hardwood forest in Mt. Jumbong Biological Reserve Area, Korea. To do this, environmental and vegetational factors from 196 micropoints in a 0.49 ha plot were investigated. Most of all environmental factors and vegetational factors showed the variations among micropoints. Microtopographic factors, litter depth, soil moisture content and relative light intensity at this site were spatially dependent at a scale of 14∼62 m. Coverage of tree and shrub layer and species diversity of herb layer in autumn were spatially dependent at a scale of < 15 m. Species richness and species diversity of herb layer in spring and species richness of herb layer in autumn were spatially dependent at a scale of 28∼48 m. Multiple regression analysis showed that spatial patterns of species richness and species diversity of herb layer in spring and autumn were affected by litter depth, slope, subtree layer, shrub, Sasa borealis etc. The best predictor for the spatial patterns of species richness and species diversity of herb layer at this site was the spatial pattern of litter depth. Species richness and species diversity of herb layer showed strongly negative correlation with litter depth. We estimate that the spatial pattern of litter depth at this site were affected by direction of wind, microtopography and spatial pattern of shrub layer.

  • PDF

A Study on Improving the Current Density Distribution of the Cathode by the Bipolar Phenomenon of the Auxiliary Anode through the Hull Cell Experiment (헐셀을 통한 보조 양극의 바이폴라 현상에 의한 음극의 전류밀도 분포 개선 영향성 연구)

  • Young-Seo Kim;Yeon-Soo Jeong;Han-Kyun Shin;Jung Han Kim;Hyo-Jong Lee
    • Journal of the Microelectronics and Packaging Society
    • /
    • v.30 no.1
    • /
    • pp.71-78
    • /
    • 2023
  • The possibility of improving plating thickness distribution was investigated through quantitative consideration of bipolar electrodes without external power applied. By having the cathode tilted with respect to the anode, the potential distribution in the electrolyte solution adjacent to the cathode is different due to the difference in iR drop due to the path difference to the anode in each region of the cathode. The purpose of this study is to observe the bipolar characteristics in the case of an auxiliary anode for the non-uniform potential distribution of such a Hull cell. In particular, in order to evaluate the possibility of improving the non-uniform thickness distribution of the cathode by utilizing these bipolar characteristics, it was verified through experiments and simulations, and the electric potential and current density distribution around the bipolar electrode were analyzed. The electroplating in a Hull cell was performed for 75 min at a current density of 10 mA/cm2, and the average thickness is about 16 ㎛. The standard deviation of the thickness was 10 ㎛ in the normal Hull cell without using the auxiliary anode, whereas it was 3.5 ㎛ in the case of using the auxiliary cathode. Simulation calculations also showed 8.9 ㎛ and 3.3 ㎛ for each condition, and it was found that the consistency between the experimental and simulation results was relatively high, and the thickness distribution could be improved through using the auxiliary anode by the bipolar phenomenon.