• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.26 no.1
• /
• pp.11-36
• /
• 2021

The solar annual (Sa) and semiannual (Ssa) tides account for much of the non-uniform annual and seasonal variability observed in sea levels. These non-equilibrium tides depend on atmospheric variations, forced by changes in the Sun's distance and declination, as well as on hydrographic conditions. Here we employ tidal harmonic analyses to calculate Sa and Ssa harmonic constants for 21 Korean coastal tidal stations (TS), operated by the Korea Hydrographic and Oceanographic Agency. We used 19 year-long (1999 to 2017) 1 hr-interval sea level records from each site, and used two conventional harmonic analysis (HA) programs (Task2K and UTide). The stability of Sa harmonic constants was estimated with respect to starting date and record length of the data, and we examined the spatial distribution of the calculated Sa and Ssa harmonic constants. HA was performed on Incheon TS (ITS) records using 369-day subsets; the first start date was January 1, 1999, the subsequent data subset starting 24 hours later, and so on up until the final start date was December 27, 2017. Variations in the Sa constants produced by the two HA packages had similar magnitudes and start date sensitivity. Results from the two HA packages had a large difference in phase lag (about 78°) but relatively small amplitude (<1 cm) difference. The phase lag difference occurred in large part since Task2K excludes the perihelion astronomical variable. Sensitivity of the ITS Sa constants to data record length (i.e., 1, 2, 3, 5, 9, and 19 years) was also tested to determine the data length needed to yield stable Sa results. HA results revealed that 5 to 9 year sea level records could estimate Sa harmonic constants with relatively small error, while the best results are produced using 19 year-long records. As noted earlier, Sa amplitudes vary with regional hydrographic and atmospheric conditions. Sa amplitudes at the twenty one TS ranged from 15.0 to 18.6 cm, 10.7 to 17.5 cm, and 10.5 to 13.0 cm, along the west coast, south coast including Jejudo, and east coast including Ulleungdo, respectively. Except at Ulleungdo, it was found that the Ssa constituent contributes to produce asymmetric seasonal sea level variation and it delays (hastens) the highest (lowest) sea levels. Comparisons between monthly mean, air-pressure adjusted, and steric sea level variations revealed that year-to-year and asymmetric seasonal variations in sea levels were largely produced by steric sea level variation and inverted barometer effect.

• Food Science and Preservation
• /
• v.19 no.4
• /
• pp.560-568
• /
• 2012

Four dimensional response surface methodology was used to monitor the extraction conditions and predict the optimum extraction conditions on physicochemical properties of Liriope platyphylla. Maximum yield of total soluble solid was 66.02% into range of 35.06~65.70%, and maximum extraction conditions were 16.86 mL/g in ratio of solvent to sample, $99.55^{\circ}C$ in extraction temperature and 3.20 hr in extraction time. Maximum extraction conditions of total phenolics were 18.78 mL/g, $97.09^{\circ}C$ and 3.71 hr. Maximum content of crude saponin was 6.51% into range of 2.22~6.21 %, and maximum extraction conditions were 21.33 mL/g, $95.49^{\circ}C$ and 3.00 hr. Maximum content of reducing sugar was 6.75% into range of 2.43~6.51%, and maximum extraction conditions were 22.93 mL/g, $89.64^{\circ}C$ and 3.75 hr. Electron donating ability was maximized in 16.74 mL/g, $99.63^{\circ}C$ and 3.16 hr. The range of optimum conditions gained by the superimposed four dimensional response surfaces on total soluble solid, crude saponin and reducing sugar of Liriope platyphylla was 15~23 mL/g, 92~$100^{\circ}C$ and 2.4~5.0 hr. And total soluble solid, total phenolics, crude saponin, reducing sugar, browning color intensity and electron donating ability at the given conditions(20 mL/g, $100^{\circ}C$, 3 hr) within the range of optimum conditions were 65.75%, 1.30 mg/g, 6.33%, 5.93%, 0.11 and 10.52%, respectively.

• Journal of Korean Society of Forest Science
• /
• v.111 no.3
• /
• pp.357-364
• /
• 2022

We investigated the early growth characteristics of Quercus rubra planted in six regions (Hwaseong, Yangpyeong, Pyeongchang, Samcheok, Chungju, and Gimje) in South Korea in relation to soil physicochemical properties and meteorological factors. Q. rubra (1-0) were planted at a density of 3,000 trees ha^-1. The average height, root collar diameter (RCD), and volume of 8-year-old Q. rubra planted in 2014 were 3.52 m, 3.84 cm, and 0.0023 m³, respectively. The growth parameters of Q. rubra were the highest and lowest in Hwaseong and Pyeongchang, respectively. Correlation analysis among the soil physicochemical properties, meteorological factors, and plantation growth characteristics found that pH was the only soil factor negatively correlated with RCD, and the other soil factors were not significantly correlated with the growth characteristics. However, growth characteristics were positively correlated to average temperature from March to October and daily maximum temperature; and they were negatively correlated to altitude, topology, and the number of rainy days from March to October. In particular, the trees planted in Hwaseong area showed the best early growth characteristics because this area had the highest daily maximum temperature, the x average temperature from March to October, the low altitude, and it is located close to the foot of a mountain. In Pyeongchang, the early growth characteristics were negatively affected by winter cold damage because of the high altitude, low daily minimum temperature, and damage by wild animals. In Hwaseong, meteorological factors such as temperature and altitude were more highly correlated to growth characteristics of Q. rubra than the physicochemical soil properties. These results will provide useful information for determining suitable sites for Q. rubra plantations and for predicting early growth characteristics in response to environmental factors.

• Korean journal of applied entomology
• /
• v.57 no.3
• /
• pp.127-135
• /
• 2018

Climate change can affect variables related to the life cycle of insects, including growth, development, survival, reproduction and distribution. As it encourages alien insects to rapidly spread and settle, climate change is regarded as one of the direct causes of decreased biodiversity because it disturbed ecosystems and reduces the population of native species. Hypera postica caused a great deal of damage in the southern provinces of Korea after it was first identified on Jeju lsland in the 1990s. In recent years, the number of individuals moving to estivation sites has concerned scientists due to the crop damage and national proliferation. In this study, we examine how climate change could affect inhabitation of H. postica. The MaxEnt model was applied to estimate potential distributions of H. postica using future climate change scenarios, namely, representative concentration pathway (RCP) 4.5 and RCP 8.5. As variables of the model, this study used six bio-climates (bio3, bio6, bio10, bio12, bio14, and bio16) in consideration of the ecological characteristics of 66 areas where inhabitation of H. postica was confirmed from 2015 to 2017, and in consideration of the interrelation between prediction variables. The fitness of the model was measured at a considered potentially useful level of 0.765 on average, and the warmest quarter has a high contribution rate of 60-70%. Prediction models (RCP 4.5 and RCP 8.5) results for the year 2050 and 2070 indicated that H. postica habitats are projected to expand across the Korean peninsula due to increasing temperatures.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.19 no.1
• /
• pp.66-75
• /
• 2014

This study aims to understand environmental factors that determine spatial distribution of macrozoobenthic community in the southern area (ca 100-500 m depth) of East Sea, Korea, known as a candidate site for carbon storage under the seabed. From sixteen locations sampled in the summer of 2012, a total of 158 species were identified, showing density of $843indiv/m^2$ and biomass of $26.2g\;WW/m^2$, with increasing faunal density towards biologically higher diverse locations. Principal component analysis showed that a total of 33 environmental parameters were reduced to three principal components (PC), indicating sediment, bottom water, and depth, respectively. As sand content was increasing, number of species increased but biomass decreased. Six dominant species including two bivalve species favored high concentrations of ${\Omega}$ aragonite and ${\Omega}$ calcite, indicating that the corresponding species can be severely damaged by ocean acidification or $CO_2$ effluent. Cluaster analysis based on more than 1% density dominant species classified the entire study area into four faunal assemblage (location groups), which were delineated by characteristic species, including (A) Ampelisca miharaensis, (B) Edwardsioides japonica, (C) Maldane cristata, (D) Spiophanes kroeyeri, and clearly separated in terms of geography, bottom water and sediment environment. Overall, a discriminant function model was developed to predict four faunal assemblages from five simply-measured environmental variables (depth, sand content in sediment, temperature, salinity and pH in bottom water) with 100% accuracy, implying that benthic faunal assemablages are closed linked to certain combinations of abiotic factors.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.16 no.3
• /
• pp.23-33
• /
• 2012

Dynamic response measurements from natural excitation were carried out for three 18-story office buildings to determine their inherent properties. The beam-column frame system was adopted as a typical structural form, but a core wall was added to resist the lateral force more effectively, resulting in a mixed configuration. To extract modal parameters such as natural frequencies, mode shapes and damping ratios from a series of vibration records at each floor, the most advanced operational system identification methods based on frequency- and time-domain like FDD, pLSCF and SSI were applied. Extracted frequencies and mode shapes from the different identification methods showed a greater consistency for three buildings, however the three lower frequencies extracted were 1.2 to 1.7 times as stiff as those obtained using the initial FE models. Comparing the extracted fundamental periods with those estimated from the code equations and FE analysis, the FE analysis results showed the most flexible behavior, and the most simple equation that considers the building height as the only parameter correlated fairly well with test results. It is recognized that such a discrepancy arises from the fact that the present tests exclude the stiffness decreasing factors like concrete cracking, while the FE models ignore the stiffness increasing factors, such as the contribution of non-structural elements and the actual material properties used.

• Food Science and Preservation
• /
• v.12 no.6
• /
• pp.591-599
• /
• 2005

This study was conducted to optimize the extraction conditions from cabbage by a response surface methodology. In extraction conditions based on the central composite design with variations, the ratio of solvent to sample ($10\~30$mL/g), ethanol concentration ($0\~100\%$) and extraction temperature ($35\~95^{circ}C$) coefficients of determinations ($R^2$) were 0.8162(p<0.1), 0.8173(p<0.1), 0.9374(p<0.01) and 0.9116(p<0.05) in extraction yield, electron donating ability, tyrosinase inhibition and SOD-like ability, respectively. Estimated extraction conditions for the maximizing yield, electron donating ability and SOD-like ability were $15\~30$ mL/g in ratio of solvent to sample, $40\~80\%$; ethanol concentration, and $50\~90^{\circ}C$ ; extraction temperature. Predicted values at the optimum condition (25 mL/g solvent to sample, $50\%$ ethanol concentration and $70^{\circ}C$ in extraction temperature) were in good agreement with observed values.

• 제어로봇시스템학회:학술대회논문집
• /
• 1986.10a
• /
• pp.607-612
• /
• 1986

최근 테니스의 저변인구가 크게 증가함에 따라 테니스 라켓의 제작기술도 상당한 수준에 이르렀고 설계제작의 자동화에 의해서 양질의 제품이 시판되고 있다. 그러나 라켓에 볼이 임팩트될때 생기는 진동으로 야기되는 테니스 엘보우 등, 해결해야 할 문제들이 아직도 남아 있다. 이와같이 테니스 라켓의 정적인 강도 뿐만아니라 동적인 특성도 중요한 관심의 대상이 되어감에 따라 볼 컨트롤을 용이하게 한다거나, 안정타점영역(Sweet Spot)의 확장과 그립부의 진동등에 의해서 발생하는 엘보우 현상을 방지하기 위해 여러가지 연구가 수행되어 왔다. 특히, 다차원 스펙트럼해석 및 모우드 해석법에의해 그립부에 미치는 진동원의 동정과 라켓의 동적거동에 대해서 연구되었고, 라켓의 재질변경과 그립부의 구조변경에 의한 안정타점영역에 영향을 미치는 모우드 파라미터(Modal Parameter)의 추정에 관한 연구도 수행되었다. 이러한 연구들은 결국 안정타점영역을 확장시키거나 테니스 엘보우를 방지하기 위한 것으로서 이러한 목적을 달성하기위해 테니스 라켓의 진동 모우드에 관계되는 파라미터들을 찾아서 그 모우드 파라미터의 변화에 따르느 진동 모우드의 거동에 대해서 연구할 필요가 있다. 본 논문에서는 실험적인 모우드 해석법을 실제 테니스 라켓에 적용하여 모우드 파라미터들을 구한 다음 그 파라미터의 변화에 따르는 안정타점영역의 변화를 컴퓨터 시뮬레이션을 통해서 예측하였다. 또한 안정타점영역을 넓히고 라켓의 동특성을 개선시킬 수 있는 모우드 파라미터를 찾아서 테니스 라켓의 설계, 제작 단계에 정보를 제공하는 CAD(Computer Aided Design)에 좋은 자료를 얻고자 한다. 있으나 파도에 의한 영향이 가장 크므로 본 논문에서는 파도에 의한 영향만을 고려하였다. 파도는 쌍동선에 외란으로 작용하며 측정할 수 없는 양이므로 PID, LQ 제어에서는 제어모델에 포함되지 않지만 LQG 제어에서는 제어모델에 포함된다. LQG 제어의 경우 제어모델에 파도를 백색잡음으로 가정하고 제어기를 구성한 것 (LQG1)과 2차의 쉐이핑필터(shaping filter)를 사용하여 구성한 것(LQG2)으로 나누었다.져 한다.) 식도 이물에 의한, 또는 식도경술에 의한 합병증이 초래한 경우는 식도점막열상 1례 (1.8 %), 식도 천공 1례 (1.8 %) 였으며, 기도이물에 의한, 또는 기관지경술에 의한 합병증이 초래한 경우는 무기폐 2례 (11.1 %), 폐렴 3례 (16.7 %)로 나타났다.5예에서 소실되었다. 5 ) 청각심리검사 (Psychoacoustic evaluation)에서 폴립은 술전에 Grade 1∼2의 사성이 있었던 11예중 술후 10예에서 Grade 0로 되었으며 Grade 1∼2의 사성이 있었던 3예의 결절에서도 모두 Grade 0로 정상화되었다.>치를 측정한 결과 투여전과 차이가 없었다. 7) 이상의 결과로 볼때 Cis-platinum 사용으로 인한 이중독증은 신장기능이 정상일때는 충분한 hydration으로써 예방이 가능하며 동시에 금기로 알려져왔던 감음성난청이 있는 두경부악성종양환자에서도 세심한 주의하에 적절히 사용한다면 좋은 결과를 얻을 수 있을 것으로 사려된다.은 결과를 얻었기에 문헌고찰과 함께 보고하는 바이다. 1) 이관폐쇄술후 18시간에 최초로 삼출액이 확인되었으며 그 이후는 전실험군에서 삼출성중이염이 유발되다. 2

• Food Science and Preservation
• /
• v.13 no.2
• /
• pp.154-160
• /
• 2006

Shelf-life of functional beverage for the purpose of body fat reduction during storage was estimated at different temperatures. To estimate quality change of functional beverage, vacuum gauge, sugar concentration pit acidify, Hunter's color value, browning color intensity, total cell count and sensory evaluation were measured periodically. Vacuum gauge, sugar concentration pH and acidity were little changed and total cell count was not detected. By using the correlation coefficient between sensory evaluation and physicochemical properties, b-value was chosen for quality index of functional beverage. $Q_{10}-values$ for shelf-life were in the range of $2.13{\sim}2.59$. When sensory evaluation was 2.5 at $50^{\circ}C$, storage period was 6.83 weeks. And shelf-life calculated by $Q_{10}-values$ were 73.89, 34.21 and 13.21 weeks in $20^{\circ}C,\;30^{\circ}C\;and\;40^{\circ}C$, respectively.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.2
• /
• pp.251-260
• /
• 2015

The end plate connection is applied to beam-column moment connections in various forms. Such end plate connection displays changes in the behavioral characteristics, strength and stiffness, and energy dissipation capacity based on the thickness and length of the end plate, the number and diameter of the high strength bolt, the gauge distance of the high strength bolt, prying action force of the high strength bolt, and dimensions and length of the welds. Accordingly, this study has apprehended the axial tensile stiffness and prying action force of the high strength bolt connected on the tensile side based on the difference in thickness of the end plate, and was conducted to propose an analysis model for the prediction of such variables that affect the operating properties of the end plate. To achieve this, this study has conducted a three-dimensional non-linear finite-element analysis of the unstiffened expanding end plate connection by selecting only the thickness of the end plate as the variable.