• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.24-27
• /
• 2003

Radiofrequency ablation (RFA) as one of the microwave hyperthermia is becoming the treatment of choice for small but inoperable tumors of the liver. In this paper, we designed the applicator composed of semi-rigid coaxial cable antenna with a ring slot for RFA. To optimize the maximum output of radiation with omni direction at 2450 ㎒, we simulated the applicator using Electromagnetic simulation program and analyzed the return loss and the electric field E$\_$tot/ at the near-field region between the simulation results and measurement results. As a result, we obtained the return loss of -29.786 dB at 2450 ㎒ when the applicator was placed between two blocks of a pig's liver, and the measurement results agreed with the simulation results well. Therefore, this applicator using semi-rigid coaxial cable antenna with a ring slot can be used very usefully as the applicator for RFA.

• Proceedings of the Korea Institutes of Information Security and Cryptology Conference
• /
• 2003.12a
• /
• pp.691-700
• /
• 2003

어디서나 접속할 수 있는 인터넷의 광역성과 최근 들어 인터넷을 통한 전자상거래의 급진전, 네트웍을 통한 다양한 형태의 원격 접속 확대 등으로 이제 많은 기업들이 통신비가 상대적으로 저렴하면 서도 기밀성이 보장되는 인터넷을 기반으로 하는 Internet Protocol Virtual Private Network(IP VPN) 도입을 서두르고 있다 VPN은 공중망 인프라를 공유하여 구축된 가상 사설망을 의미한다. IP VPN으로 기업은 본사와 지사를 연결하는 Intranet, 협력사와 연결되는 Extranet 그리고 최근 들어 급증하고 있는 이동 근무자와 재택 근무자를 회사에 안전하게 연결시킬 수 있는 원격 접속 등을 경제적으로 구축할 수 있다. 또한 광케이블과 동축케이블이 혼합된 Hybrid Fiber & Coaxial(HFC)망이 초고속인터넷, 디지털방송, 주문형비디오(VOD) 등의 멀티미디어 서비스를 수용하기에 가장 좋은 방안으로 최근 각광을 받고 있다. HFC망은 기존의 CATV망을 기반으로 하므로 신규 투자비가 적게 들면서도 다양한 형태의 고속 데이터 통신이 가능하다. 이에 본 논문에서는 HFC망에서의 IP VPN의 성능을 전송 프로토콜과 암호화 알고리즘을 달리 하면서 어떤 요소가 성능에 얼마나 영향을 주는지와 요소간 상호작용이 어떻게 일어나는지, 또한 어떤 조합으로 VPN 통신을 할 때 가장 좋은 성능을 보이는지를 비교 분석한다.

• Proceedings of the Korea Institute of Applied Superconductivity and Cryogenics Conference
• /
• 2003.02a
• /
• pp.47-50
• /
• 2003

In order to verify the extended theory, we have fabricated a two layers cable with the same twisting layer pitch. It was observed that almost all the operational current less than the critical current flowed on the outer layer because of its lower inductance. In case of operational current more than critical currents of layers, the flux flow resistances affect strongly current waveform and thereby the currents of layers were determined by the flux flow resistances. And we investigated withstand voltage, impulse voltage and breakdown characteristics of mini-model cable. In these test, the withstand voltage and impulse voltage test was satisfied and the breakdown voltage was 110kV.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.7
• /
• pp.1814-1819
• /
• 1996

This paper describes a dnw serial interface system which uses comma free code. Typically parallel 25 pin cable and connectors are used to transfer and receive the data between digital systems such as HDVCR, D3VTR and HDTV Receiver.The coaxial cable is more desirable for consumer product applications and also for studio applications where long signal paths and switching are requeired. This serial data trasfer technique is possible the error detection and the self synchronization, also easy edge insertion for PLL control. It is also cost effective because is does not requeire RF PLL, scrambling, and NRZI hardware.

• Electronics and Telecommunications Trends
• /
• v.18 no.6 s.84
• /
• pp.34-40
• /
• 2003

1998년 시작된 초고속 인터넷 서비스는 약 4년 만에 세계 1위의 보급률을 보이고 있을 정도로 우리 나라의 정보통신 인프라는 급속도로 성장하여 왔다. 최근 유무선 통합 및 통신과 방송이 융합되는 광대역 통합망(BcN) 환경에서 초고속 인터넷 서비스와 디지털방송 서비스를 제공하기 위한 초고속 인프라의 가입자망 형태는 동선 기반의 ADSL(Asymmetric Digital Subscriber Line)/VDSL(Very high-data rate Digital Subscriber Line) 및 광/동축 혼합망인 HFC, 광섬유 기반의 FTTH(Fiber To The Home) 등이 있다. 그 중에서 HFC는 그 동안 주로 케이블 TV 프로그램의 전송망으로 활용되어 오다가 최근 통신. 방송 융합 환경에서 초고속 인터넷 가입자망으로 부각되고 있다. 본 고에서는 HFC 망의 특성과 HFC 망의 핵심장비인 CMTS와 케이블모뎀의 시장 현황 및 전망에 대해서 알아보고, 광대역 통합망의 가입자망으로서의 HFC의 역할에 대해 논의하고자 한다.

• Proceedings of the IEEK Conference
• /
• 1998.06a
• /
• pp.173-176
• /
• 1998

The surface wave launcher from the dielectric coated coaxial cable to dielectric slab is investigated. FDTD method using local subcell and contour-path model is applied to determine the fine geometrical features. The reflection coefficient in coaxial cable region is found using extract algorithm. In this paper, two structures are presented as coaxial slot surface wave launcher. One structure has a vertical launching angle, and the other has an arbitrary launching angle. The numerical results show that a certain launching angle is minimized the reflection coefficient.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.4
• /
• pp.789-794
• /
• 2011

A coaxial-cable impedance transformer used in wideband frequency range is generally restricted to the fixed impedance transformation ratio as n2:1 or 1:n2(n: the number of coaxial cables). In this paper, we propose a new coaxial-cable impedance transformer to have an arbitrary impedance transformation ratio. We have fabricated three impedance transformers($50-{\Omega}$ to $25-{\Omega}$, $50-{\Omega}$ to $20-{\Omega}$ and $50-{\Omega}$ to $9-{\Omega}$) to confirm the operation characteristic of the suggested impedance transformer. The reflection characteristics (S11) of the fabricated $50-{\Omega}$ to $25-{\Omega}$ and $50-{\Omega}$ to $20-{\Omega}$ impedance transformer were less than -15dB over about 3-octaves frequency range and the reflection characteristic (S11) of the fabricated $50-{\Omega}$ to $9-{\Omega}$ impedance transformer was less than -15dB over about 1-octave frequency range, respectively.

• Proceedings of the KIEE Conference
• /
• 1998.07d
• /
• pp.1484-1486
• /
• 1998

Recently, extending the local broadcasting and increasing lots of informations, the low-loss communication cable is required in proportion as frequency. The reason of transportation loss causes to using the high frequencies like hundreds of MHz or decades of GHz. For the low transportation loss, it is required the developing-technology of foaming and the high foamed insulator with the dielectric ratio of the nearest to 1. Therefore, there is the purpose of developing the insulating materials for the low dielectric ratio. Also it is important to measure the attenuation, which is one of the important parameters, as the evaluation of transportation characteristic with frequency in the communication cable. In this paper, the result showed that the dielectric ratio(1.4) of the nearest to 1 and low attenuation with high frequency were very related to the transportation and reflection characteristics such as propagation velocity(82.27%), delay time and voltage standing wave ratio(VSWR).

• Journal of Advanced Navigation Technology
• /
• v.10 no.4
• /
• pp.326-332
• /
• 2006

In this study, the antenna was proposed for the omni-directional characteristic in horizontal plane. Therefore we proposed $1{\times}4$ microstrip patch array on cylindrical surface for studying microstrip patch antennas. This antenna is designed for 2.45GHz ISM band and applications. This antenna can be applied to the base station of wireless microphone and access point of wireless LAN. The length and width of the patch antenna and the width of the feed line were calculated by using the theory of microstrip patch antenna, by using the both the 2.5D and 3D EM simulators the optimized antenna characteristics are obtained. From result of measured, antenna's impedance of coaxial waveguide port was 51.915-j3.688 ${\Omega}$, the return loss was -31dB and VSWR was 1.081.

• Convergence Security Journal
• /
• v.12 no.3
• /
• pp.27-34
• /
• 2012

In this paper, using a new low-power consumption method for ZigBee device, which consume low-power using an output power control algorithm through RSSI monitoring as interlocking wireless network using ZigBee which has advantages of a low-power consumption, a low-cost, a compatibility and a draft international standardization enacted by IEEE and ZigBee Alliance, with wired network using built coaxial cable to overcome the disadvantage of the existing wireless sensor network, is proposed. Effectiveness of the output power control algorithm through RSSI monitoring has been verified by experimentation for more optimized low-power consumption.